Commit b4919807 authored by Roger Tseng's avatar Roger Tseng Committed by Luis Henriques

mmc: rtsx_usb_sdmmc: fix incorrect last byte in R2 response

commit 6f67cc6f upstream.

Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain inconsistent CID from the
same card after resume and misidentify it as a different card.

Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.

Fixes: c7f6558d ("mmc: Add realtek USB sdmmc host driver")
Signed-off-by: default avatarRoger Tseng <rogerable@realtek.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent b55a912a
...@@ -435,6 +435,13 @@ static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host, ...@@ -435,6 +435,13 @@ static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host,
} }
if (rsp_type == SD_RSP_TYPE_R2) { if (rsp_type == SD_RSP_TYPE_R2) {
/*
* The controller offloads the last byte {CRC-7, end bit 1'b1}
* of response type R2. Assign dummy CRC, 0, and end bit to the
* byte(ptr[16], goes into the LSB of resp[3] later).
*/
ptr[16] = 1;
for (i = 0; i < 4; i++) { for (i = 0; i < 4; i++) {
cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4); cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n", dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment