Commit b4ce6dd4 authored by Mark Brown's avatar Mark Brown

ASoC: SOF: mediatek: add debug dump

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Add the ability to generate debug dumps on MediaTek SOF implementations.
parents bb94bb86 3a054f90
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
obj-$(CONFIG_SND_SOC_SOF_MTK_COMMON) += mtk-adsp-common.o
obj-$(CONFIG_SND_SOC_SOF_MT8195) += mt8195/
obj-$(CONFIG_SND_SOC_SOF_MT8186) += mt8186/
......@@ -24,6 +24,7 @@
#include "../../sof-of-dev.h"
#include "../../sof-audio.h"
#include "../adsp_helper.h"
#include "../mtk-adsp-common.h"
#include "mt8195.h"
#include "mt8195-clk.h"
......@@ -485,6 +486,31 @@ static int mt8195_ipc_msg_data(struct snd_sof_dev *sdev,
return 0;
}
static void mt8195_adsp_dump(struct snd_sof_dev *sdev, u32 flags)
{
u32 dbg_pc, dbg_data, dbg_bus0, dbg_bus1, dbg_inst;
u32 dbg_ls0stat, dbg_ls1stat, faultbus, faultinfo, swrest;
/* dump debug registers */
dbg_pc = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGPC);
dbg_data = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGDATA);
dbg_bus0 = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGBUS0);
dbg_bus1 = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGBUS1);
dbg_inst = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGINST);
dbg_ls0stat = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGLS0STAT);
dbg_ls1stat = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PDEBUGLS1STAT);
faultbus = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PFAULTBUS);
faultinfo = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_PFAULTINFO);
swrest = snd_sof_dsp_read(sdev, DSP_REG_BAR, DSP_RESET_SW);
dev_info(sdev->dev, "adsp dump : pc %#x, data %#x, bus0 %#x, bus1 %#x, swrest %#x",
dbg_pc, dbg_data, dbg_bus0, dbg_bus1, swrest);
dev_info(sdev->dev, "dbg_inst %#x, ls0stat %#x, ls1stat %#x, faultbus %#x, faultinfo %#x",
dbg_inst, dbg_ls0stat, dbg_ls1stat, faultbus, faultinfo);
mtk_adsp_dump(sdev, flags);
}
static struct snd_soc_dai_driver mt8195_dai[] = {
{
.name = "SOF_DL2",
......@@ -552,6 +578,9 @@ static struct snd_sof_dsp_ops sof_mt8195_ops = {
/* Firmware ops */
.dsp_arch_ops = &sof_xtensa_arch_ops,
/* Debug information */
.dbg_dump = mt8195_adsp_dump,
/* DAI drivers */
.drv = mt8195_dai,
.num_drv = ARRAY_SIZE(mt8195_dai),
......
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2022 MediaTek Inc. All rights reserved.
//
// Author: YC Hung <yc.hung@mediatek.com>
/*
* Common helpers for the audio DSP on MediaTek platforms
*/
#include <linux/module.h>
#include <sound/sof/xtensa.h>
#include "../ops.h"
#include "mtk-adsp-common.h"
/**
* mtk_adsp_get_registers() - This function is called in case of DSP oops
* in order to gather information about the registers, filename and
* linenumber and stack.
* @sdev: SOF device
* @xoops: Stores information about registers.
* @panic_info: Stores information about filename and line number.
* @stack: Stores the stack dump.
* @stack_words: Size of the stack dump.
*/
static void mtk_adsp_get_registers(struct snd_sof_dev *sdev,
struct sof_ipc_dsp_oops_xtensa *xoops,
struct sof_ipc_panic_info *panic_info,
u32 *stack, size_t stack_words)
{
u32 offset = sdev->dsp_oops_offset;
/* first read registers */
sof_mailbox_read(sdev, offset, xoops, sizeof(*xoops));
/* then get panic info */
if (xoops->arch_hdr.totalsize > EXCEPT_MAX_HDR_SIZE) {
dev_err(sdev->dev, "invalid header size 0x%x\n",
xoops->arch_hdr.totalsize);
return;
}
offset += xoops->arch_hdr.totalsize;
sof_mailbox_read(sdev, offset, panic_info, sizeof(*panic_info));
/* then get the stack */
offset += sizeof(*panic_info);
sof_mailbox_read(sdev, offset, stack, stack_words * sizeof(u32));
}
/**
* mtk_adsp_dump() - This function is called when a panic message is
* received from the firmware.
* @sdev: SOF device
* @flags: parameter not used but required by ops prototype
*/
void mtk_adsp_dump(struct snd_sof_dev *sdev, u32 flags)
{
char *level = (flags & SOF_DBG_DUMP_OPTIONAL) ? KERN_DEBUG : KERN_ERR;
struct sof_ipc_dsp_oops_xtensa xoops;
struct sof_ipc_panic_info panic_info;
u32 stack[MTK_ADSP_STACK_DUMP_SIZE];
u32 status;
/* Get information about the panic status from the debug box area.
* Compute the trace point based on the status.
*/
sof_mailbox_read(sdev, sdev->debug_box.offset + 0x4, &status, 4);
/* Get information about the registers, the filename and line
* number and the stack.
*/
mtk_adsp_get_registers(sdev, &xoops, &panic_info, stack,
MTK_ADSP_STACK_DUMP_SIZE);
/* Print the information to the console */
sof_print_oops_and_stack(sdev, level, status, status, &xoops, &panic_info,
stack, MTK_ADSP_STACK_DUMP_SIZE);
}
EXPORT_SYMBOL(mtk_adsp_dump);
MODULE_LICENSE("Dual BSD/GPL");
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
#ifndef __MEDIATEK_ADSP_COMMON_H__
#define __MEDIATEK_ADSP_COMMON_H__
#define EXCEPT_MAX_HDR_SIZE 0x400
#define MTK_ADSP_STACK_DUMP_SIZE 32
void mtk_adsp_dump(struct snd_sof_dev *sdev, u32 flags);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment