Commit b4dc53e1 authored by Brian Norris's avatar Brian Norris Committed by Artem Bityutskiy

mtd: nand: renumber the reorganized flags in nand.h / bbm.h

After several steps of rearrangement and consolidation, it is probably
worth re-sequencing the numbers on some of our affected flags in nand.h
and bbm.h.
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Signed-off-by: default avatarArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
parent 53d5d888
......@@ -92,28 +92,29 @@ struct nand_bbt_descr {
* layout or if this information is already purged. Must be used in conjunction
* with NAND_BBT_CREATE.
*/
#define NAND_BBT_CREATE_EMPTY 0x01000000
#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000400
#define NAND_BBT_SCANALLPAGES 0x00000800
/* Scan block empty during good / bad block scan */
#define NAND_BBT_SCANEMPTY 0x00000800
#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00001000
#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000
#define NAND_BBT_SAVECONTENT 0x00004000
/* Search good / bad pattern on the first and the second page */
#define NAND_BBT_SCAN2NDPAGE 0x00004000
#define NAND_BBT_SCAN2NDPAGE 0x00008000
/* Search good / bad pattern on the last page of the eraseblock */
#define NAND_BBT_SCANLASTPAGE 0x00008000
/* The nand_bbt_descr was created dynamicaly and must be freed */
#define NAND_BBT_DYNAMICSTRUCT 0x00200000
#define NAND_BBT_SCANLASTPAGE 0x00010000
/*
* Use a flash based bad block table. By default, OOB identifier is saved in
* OOB area. This option is passed to the default bad block table function.
*/
#define NAND_BBT_USE_FLASH 0x00040000
#define NAND_BBT_USE_FLASH 0x00020000
/* Do not store flash based bad block table in OOB area; store it in-band */
#define NAND_BBT_NO_OOB 0x00080000
#define NAND_BBT_NO_OOB 0x00040000
/* The nand_bbt_descr was created dynamicaly and must be freed */
#define NAND_BBT_DYNAMICSTRUCT 0x80000000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
......
......@@ -220,14 +220,14 @@ typedef enum {
/* Non chip related options */
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
#define NAND_SKIP_BBTSCAN 0x00010000
/*
* This option is defined if the board driver allocates its own buffers
* (e.g. because it needs them DMA-coherent).
*/
#define NAND_OWN_BUFFERS 0x00040000
#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00080000
#define NAND_SCAN_SILENT_NODEV 0x00040000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment