Commit b4df5405 authored by Imre Deak's avatar Imre Deak

drm/i915: Extend hotplug detect retry on TypeC connectors to 5 seconds

On TypeC ports if a sink deasserts/reasserts its HPD signal, generating
a hotplug interrupt without the sink getting unplugged/replugged from
the connector, there can be an up to 3 seconds delay until the AUX
channel gets functional. To avoid detection failures this delay causes
retry the detection for 5 seconds.

I noticed this on ICL/TGL RVPs and a DELL XPS 13 7390 ICL laptop.

References: https://gitlab.freedesktop.org/drm/intel/issues/1067Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Reviewed-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-2-imre.deak@intel.com
parent 8c8919c7
......@@ -4520,7 +4520,10 @@ static enum intel_hotplug_state
intel_ddi_hotplug(struct intel_encoder *encoder,
struct intel_connector *connector)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
enum phy phy = intel_port_to_phy(i915, encoder->port);
bool is_tc = intel_phy_is_tc(i915, phy);
struct drm_modeset_acquire_ctx ctx;
enum intel_hotplug_state state;
int ret;
......@@ -4563,8 +4566,15 @@ intel_ddi_hotplug(struct intel_encoder *encoder,
* valid EDID. To solve this schedule another detection cycle if this
* time around we didn't detect any change in the sink's connection
* status.
*
* Type-c connectors which get their HPD signal deasserted then
* reasserted, without unplugging/replugging the sink from the
* connector, introduce a delay until the AUX channel communication
* becomes functional. Retry the detection for 5 seconds on type-c
* connectors to account for this delay.
*/
if (state == INTEL_HOTPLUG_UNCHANGED && !connector->hotplug_retries &&
if (state == INTEL_HOTPLUG_UNCHANGED &&
connector->hotplug_retries < (is_tc ? 5 : 1) &&
!dig_port->dp.is_mst)
state = INTEL_HOTPLUG_RETRY;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment