Commit b4fc6f72 authored by Anson Huang's avatar Anson Huang Committed by Shawn Guo

clk: imx8mq: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 0d77abc4
......@@ -428,7 +428,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
hws[IMX8MQ_CLK_GPU_SHADER_DIV] = hws[IMX8MQ_CLK_GPU_SHADER];
/* CORE SEL */
hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels), CLK_IS_CRITICAL);
hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels));
/* BUS */
hws[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
......@@ -593,15 +593,15 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
hws[IMX8MQ_GPT_3M_CLK] = imx_clk_hw_fixed_factor("gpt_3m", "osc_25m", 1, 8);
hws[IMX8MQ_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
hws[IMX8MQ_CLK_A53_CORE]->clk,
hws[IMX8MQ_CLK_A53_CORE]->clk,
hws[IMX8MQ_ARM_PLL_OUT]->clk,
hws[IMX8MQ_CLK_A53_DIV]->clk);
clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
imx_check_clk_hws(hws, IMX8MQ_CLK_END);
err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment