Commit b580d46c authored by Kumar Gala's avatar Kumar Gala Committed by Paul Mackerras

[PATCH] powerpc: Add the ability to handle SOC ports in legacy_serial

Add the ability to configure and initialize legacy 8250 serials
ports on an SOC bus.  Also, fixed an issue that we would not
configure any serial ports if "linux,stdout-path" was not found.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent d0e132b5
......@@ -36,7 +36,8 @@ static int legacy_serial_console = -1;
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq)
phys_addr_t taddr, unsigned long irq,
unsigned int flags)
{
u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
......@@ -90,7 +91,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_ports[index].iotype = iotype;
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
legacy_serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
legacy_serial_ports[index].flags = flags;
legacy_serial_infos[index].taddr = taddr;
legacy_serial_infos[index].np = of_node_get(np);
legacy_serial_infos[index].clock = clock;
......@@ -107,6 +108,32 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
return index;
}
static int __init add_legacy_soc_port(struct device_node *np,
struct device_node *soc_dev)
{
phys_addr_t addr;
u32 *addrp;
unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
*/
if (get_property(np, "clock-frequency", NULL) == NULL)
return -1;
/* Get the address */
addrp = of_get_address(soc_dev, 0, NULL, NULL);
if (addrp == NULL)
return -1;
addr = of_translate_address(soc_dev, addrp);
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
}
static int __init add_legacy_isa_port(struct device_node *np,
struct device_node *isa_bridge)
{
......@@ -137,7 +164,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
taddr = of_translate_address(np, reg);
/* Add port, irq will be dealt with later */
return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ);
return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
}
......@@ -204,7 +231,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
return add_legacy_port(np, index, iotype, base, addr, NO_IRQ);
return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
}
/*
......@@ -218,7 +245,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
*/
void __init find_legacy_serial_ports(void)
{
struct device_node *np, *stdout;
struct device_node *np, *stdout = NULL;
char *path;
int index;
......@@ -226,13 +253,23 @@ void __init find_legacy_serial_ports(void)
/* Now find out if one of these is out firmware console */
path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
if (path == NULL) {
if (path != NULL) {
stdout = of_find_node_by_path(path);
if (stdout)
DBG("stdout is %s\n", stdout->full_name);
} else {
DBG(" no linux,stdout-path !\n");
return;
}
stdout = of_find_node_by_path(path);
if (stdout) {
DBG("stdout is %s\n", stdout->full_name);
/* First fill our array with SOC ports */
for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
struct device_node *soc = of_get_parent(np);
if (soc && !strcmp(soc->type, "soc")) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
}
of_node_put(soc);
}
/* First fill our array with ISA ports */
......@@ -437,6 +474,11 @@ static int __init check_legacy_serial_console(void)
DBG(" of_chosen is NULL !\n");
return -ENODEV;
}
if (legacy_serial_console < 0) {
DBG(" legacy_serial_console not found !\n");
return -ENODEV;
}
/* We are getting a weird phandle from OF ... */
/* ... So use the full path instead */
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment