iommu/amd: Use msi_msg shadow structs

Get rid of the macro mess and use the shadow structs for the x86 specific
MSI message format. Convert the intcapxt setup to use named bitfields as
well while touching it anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-15-dwmw2@infradead.org

drivers/iommu/amd/init.c

@@ -23,7 +23,6 @@
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/apic.h>
-#include <asm/msidef.h>
 #include <asm/gart.h>
 #include <asm/x86_init.h>
 #include <asm/iommu_table.h>
@@ -1966,10 +1965,16 @@ static int iommu_setup_msi(struct amd_iommu *iommu)
 	return 0;
 }
 
-#define XT_INT_DEST_MODE(x)	(((x) & 0x1ULL) << 2)
-#define XT_INT_DEST_LO(x)	(((x) & 0xFFFFFFULL) << 8)
-#define XT_INT_VEC(x)		(((x) & 0xFFULL) << 32)
-#define XT_INT_DEST_HI(x)	((((x) >> 24) & 0xFFULL) << 56)
+union intcapxt {
+	u64	capxt;
+	u64	reserved_0		:  2,
+		dest_mode_logical	:  1,
+		reserved_1		:  5,
+		destid_0_23		: 24,
+		vector			:  8,
+		reserved_2		: 16,
+		destid_24_31		:  8;
+} __attribute__ ((packed));
 
 /*
  * Setup the IntCapXT registers with interrupt routing information
@@ -1978,28 +1983,29 @@ static int iommu_setup_msi(struct amd_iommu *iommu)
  */
 static void iommu_update_intcapxt(struct amd_iommu *iommu)
 {
-	u64 val;
-	u32 addr_lo = readl(iommu->mmio_base + MMIO_MSI_ADDR_LO_OFFSET);
-	u32 addr_hi = readl(iommu->mmio_base + MMIO_MSI_ADDR_HI_OFFSET);
-	u32 data    = readl(iommu->mmio_base + MMIO_MSI_DATA_OFFSET);
-	bool dm     = (addr_lo >> MSI_ADDR_DEST_MODE_SHIFT) & 0x1;
-	u32 dest    = ((addr_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xFF);
+	struct msi_msg msg;
+	union intcapxt xt;
+	u32 destid;
 
-	if (x2apic_enabled())
-		dest |= MSI_ADDR_EXT_DEST_ID(addr_hi);
+	msg.address_lo = readl(iommu->mmio_base + MMIO_MSI_ADDR_LO_OFFSET);
+	msg.address_hi = readl(iommu->mmio_base + MMIO_MSI_ADDR_HI_OFFSET);
+	msg.data = readl(iommu->mmio_base + MMIO_MSI_DATA_OFFSET);
 
-	val = XT_INT_VEC(data & 0xFF) |
-	      XT_INT_DEST_MODE(dm) |
-	      XT_INT_DEST_LO(dest) |
-	      XT_INT_DEST_HI(dest);
+	destid = x86_msi_msg_get_destid(&msg, x2apic_enabled());
+
+	xt.capxt = 0ULL;
+	xt.dest_mode_logical = msg.arch_data.dest_mode_logical;
+	xt.vector = msg.arch_data.vector;
+	xt.destid_0_23 = destid & GENMASK(23, 0);
+	xt.destid_24_31 = destid >> 24;
 
 	/**
 	 * Current IOMMU implemtation uses the same IRQ for all
 	 * 3 IOMMU interrupts.
 	 */
-	writeq(val, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
-	writeq(val, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
-	writeq(val, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
+	writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
+	writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
+	writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
 }
 
 static void _irq_notifier_notify(struct irq_affinity_notify *notify,

drivers/iommu/amd/iommu.c

@@ -35,7 +35,6 @@
 #include <asm/io_apic.h>
 #include <asm/apic.h>
 #include <asm/hw_irq.h>
-#include <asm/msidef.h>
 #include <asm/proto.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
@@ -3656,13 +3655,20 @@ struct irq_remap_ops amd_iommu_irq_ops = {
 	.get_irq_domain		= get_irq_domain,
 };
 
+static void fill_msi_msg(struct msi_msg *msg, u32 index)
+{
+	msg->data = index;
+	msg->address_lo = 0;
+	msg->arch_addr_lo.base_address = X86_MSI_BASE_ADDRESS_LOW;
+	msg->address_hi = X86_MSI_BASE_ADDRESS_HIGH;
+}
+
 static void irq_remapping_prepare_irte(struct amd_ir_data *data,
 				       struct irq_cfg *irq_cfg,
 				       struct irq_alloc_info *info,
 				       int devid, int index, int sub_handle)
 {
 	struct irq_2_irte *irte_info = &data->irq_2_irte;
-	struct msi_msg *msg = &data->msi_entry;
 	struct IO_APIC_route_entry *entry;
 	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
 
@@ -3693,9 +3699,7 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
 	case X86_IRQ_ALLOC_TYPE_HPET:
 	case X86_IRQ_ALLOC_TYPE_PCI_MSI:
 	case X86_IRQ_ALLOC_TYPE_PCI_MSIX:
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo = MSI_ADDR_BASE_LO;
-		msg->data = irte_info->index;
+		fill_msi_msg(&data->msi_entry, irte_info->index);
 		break;
 
 	default: