scsi: g_NCR5380: Merge g_NCR5380 and g_NCR5380_mmio drivers

Merge the port-mapped IO and memory-mapped IO support (with the help of
ioport_map) into the g_NCR5380 module and delete g_NCR5380_mmio.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS

@@ -8316,7 +8316,6 @@ F:	drivers/scsi/arm/oak.c
 F:	drivers/scsi/atari_scsi.*
 F:	drivers/scsi/dmx3191d.c
 F:	drivers/scsi/g_NCR5380.*
-F:	drivers/scsi/g_NCR5380_mmio.c
 F:	drivers/scsi/mac_scsi.*
 F:	drivers/scsi/sun3_scsi.*
 F:	drivers/scsi/sun3_scsi_vme.c

drivers/scsi/Kconfig

@@ -743,40 +743,18 @@ config SCSI_ISCI
 	  control unit found in the Intel(R) C600 series chipset.
 
 config SCSI_GENERIC_NCR5380
-	tristate "Generic NCR5380/53c400 SCSI PIO support"
+	tristate "Generic NCR5380/53c400 SCSI ISA card support"
 	depends on ISA && SCSI
 	select SCSI_SPI_ATTRS
 	---help---
-	  This is a driver for the old NCR 53c80 series of SCSI controllers
-	  on boards using PIO. Most boards such as the Trantor T130 fit this
-	  category, along with a large number of ISA 8bit controllers shipped
-	  for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
-	  you should select the specific driver for that card rather than
-	  generic 5380 support.
-
-	  It is explained in section 3.8 of the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  If it doesn't work out
-	  of the box, you may have to change some settings in
-	  <file:drivers/scsi/g_NCR5380.h>.
+	  This is a driver for old ISA card SCSI controllers based on a
+	  NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
+	  Most boards such as the Trantor T130 fit this category, as do
+	  various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called g_NCR5380.
 
-config SCSI_GENERIC_NCR5380_MMIO
-	tristate "Generic NCR5380/53c400 SCSI MMIO support"
-	depends on ISA && SCSI
-	select SCSI_SPI_ATTRS
-	---help---
-	  This is a driver for the old NCR 53c80 series of SCSI controllers
-	  on boards using memory mapped I/O. 
-	  It is explained in section 3.8 of the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  If it doesn't work out
-	  of the box, you may have to change some settings in
-	  <file:drivers/scsi/g_NCR5380.h>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called g_NCR5380_mmio.
-
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
 	depends on PCI && SCSI

drivers/scsi/Makefile

@@ -74,7 +74,6 @@ obj-$(CONFIG_SCSI_ISCI)		+= isci/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
-obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
 obj-$(CONFIG_SCSI_NCR53C406A)	+= NCR53c406a.o
 obj-$(CONFIG_SCSI_NCR_D700)	+= 53c700.o NCR_D700.o
 obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o

drivers/scsi/g_NCR5380.h

@@ -14,44 +14,30 @@
 #ifndef GENERIC_NCR5380_H
 #define GENERIC_NCR5380_H
 
-#ifndef SCSI_G_NCR5380_MEM
 #define DRV_MODULE_NAME "g_NCR5380"
 
 #define NCR5380_read(reg) \
-	inb(instance->io_port + (reg))
+	ioread8(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+		((struct NCR5380_hostdata *)shost_priv(instance))->offset + \
+		(reg))
 #define NCR5380_write(reg, value) \
-	outb(value, instance->io_port + (reg))
+	iowrite8(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+		((struct NCR5380_hostdata *)shost_priv(instance))->offset + \
+		(reg))
 
 #define NCR5380_implementation_fields \
+	int offset; \
+	void __iomem *iomem; \
+	resource_size_t iomem_size; \
 	int c400_ctl_status; \
 	int c400_blk_cnt; \
 	int c400_host_buf; \
 	int io_width;
 
-#else 
-/* therefore SCSI_G_NCR5380_MEM */
-#define DRV_MODULE_NAME "g_NCR5380_mmio"
-
 #define NCR53C400_mem_base 0x3880
 #define NCR53C400_host_buffer 0x3900
 #define NCR53C400_region_size 0x3a00
 
-#define NCR5380_read(reg) \
-	readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
-	      NCR53C400_mem_base + (reg))
-#define NCR5380_write(reg, value) \
-	writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
-	       NCR53C400_mem_base + (reg))
-
-#define NCR5380_implementation_fields \
-	void __iomem *iomem; \
-	resource_size_t iomem_size; \
-	int c400_ctl_status; \
-	int c400_blk_cnt; \
-	int c400_host_buf;
-
-#endif
-
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
         generic_NCR5380_dma_xfer_len(instance, cmd)
 #define NCR5380_dma_recv_setup		generic_NCR5380_pread
@@ -73,4 +59,3 @@
 #define BOARD_HP_C2502	4
 
 #endif /* GENERIC_NCR5380_H */
-

drivers/scsi/g_NCR5380_mmio.c

-/*
- *	There is probably a nicer way to do this but this one makes
- *	pretty obvious what is happening. We rebuild the same file with
- *	different options for mmio versus pio.
- */
-
-#define SCSI_G_NCR5380_MEM
-
-#include "g_NCR5380.c"
-