Commit b6c40536 authored by Yoichi Yuasa's avatar Yoichi Yuasa Committed by Ralf Baechle

[MIPS] separate rbtx4927_time_init() and rbtx4937_time_init()

Signed-off-by: default avatarYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent a38c4751
......@@ -301,6 +301,18 @@ static void __init rbtx4927_mem_setup(void)
#endif
}
static void __init rbtx49x7_common_time_init(void)
{
/* change default value to udelay/mdelay take reasonable time */
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
mips_hpt_frequency = txx9_cpu_clock / 2;
if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
TXX9_IRQ_BASE + 17,
50000000);
}
static void __init rbtx4927_time_init(void)
{
/*
......@@ -313,6 +325,24 @@ static void __init rbtx4927_time_init(void)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
*/
switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
txx9_cpu_clock = 166666666; /* 166MHz */
break;
default:
txx9_cpu_clock = 200000000; /* 200MHz */
}
rbtx49x7_common_time_init();
}
static void __init rbtx4937_time_init(void)
{
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
*
* For TX4937:
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
......@@ -324,39 +354,21 @@ static void __init rbtx4927_time_init(void)
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
*/
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
TX4938_CCFG_PCIDIVMODE_MASK) {
case TX4938_CCFG_PCIDIVMODE_8:
case TX4938_CCFG_PCIDIVMODE_4:
txx9_cpu_clock = 266666666; /* 266MHz */
break;
case TX4938_CCFG_PCIDIVMODE_9:
case TX4938_CCFG_PCIDIVMODE_4_5:
txx9_cpu_clock = 300000000; /* 300MHz */
break;
default:
txx9_cpu_clock = 333333333; /* 333MHz */
}
else
switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
txx9_cpu_clock = 166666666; /* 166MHz */
break;
default:
txx9_cpu_clock = 200000000; /* 200MHz */
}
/* change default value to udelay/mdelay take reasonable time */
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
TX4938_CCFG_PCIDIVMODE_MASK) {
case TX4938_CCFG_PCIDIVMODE_8:
case TX4938_CCFG_PCIDIVMODE_4:
txx9_cpu_clock = 266666666; /* 266MHz */
break;
case TX4938_CCFG_PCIDIVMODE_9:
case TX4938_CCFG_PCIDIVMODE_4_5:
txx9_cpu_clock = 300000000; /* 300MHz */
break;
default:
txx9_cpu_clock = 333333333; /* 333MHz */
}
mips_hpt_frequency = txx9_cpu_clock / 2;
if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
TXX9_IRQ_BASE + 17,
50000000);
rbtx49x7_common_time_init();
}
static int __init toshiba_rbtx4927_rtc_init(void)
......@@ -434,7 +446,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = {
.prom_init = rbtx4927_prom_init,
.mem_setup = rbtx4927_mem_setup,
.irq_setup = rbtx4927_irq_setup,
.time_init = rbtx4927_time_init,
.time_init = rbtx4937_time_init,
.device_init = rbtx4927_device_init,
.arch_init = rbtx4937_arch_init,
#ifdef CONFIG_PCI
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment