dt-bindings: phy: Convert AM654 SERDES bindings to YAML

Convert SERDES dt-bindings for TI's AM654 SoC to YAML binding.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210723135605.23572-1-kishon@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt

-TI AM654 SERDES
-
-Required properties:
- - compatible: Should be "ti,phy-am654-serdes"
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-	phandle while referencing this phy. Should be "2". The 1st cell
-	corresponds to the phy type (should be one of the types specified in
-	include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
-	lane function.
-	If SERDES0 is referenced 2nd cell should be:
-		0 - USB3
-		1 - PCIe0 Lane0
-		2 - ICSS2 SGMII Lane0
-	If SERDES1 is referenced 2nd cell should be:
-		0 - PCIe1 Lane0
-		1 - PCIe0 Lane1
-		2 - ICSS2 SGMII Lane1
- - power-domains: As documented by the generic PM domain bindings in
-	Documentation/devicetree/bindings/power/power_domain.txt.
- - clocks: List of clock-specifiers representing the input to the SERDES.
-	Should have 3 items representing the left input clock, external
-	reference clock and right input clock in that order.
- - clock-output-names: List of clock names for each of the clock outputs of
-	SERDES. Should have 3 items for CMU reference clock,
-	left output clock and right output clock in that order.
- - assigned-clocks: As defined in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
- - assigned-clock-parents: As defined in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
- - #clock-cells: Should be <1> to choose between the 3 output clocks.
-	Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-   The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
-   for selecting the correct reference clock. This can be used while
-   specifying the clocks created by SERDES.
-	=> AM654_SERDES_CMU_REFCLK
-	=> AM654_SERDES_LO_REFCLK
-	=> AM654_SERDES_RO_REFCLK
-
- - mux-controls: Phandle to the multiplexer that is used to select the lane
-	function. See #phy-cells above to see the multiplex values.
-
-Example:
-
-Example for SERDES0 is given below. It has 3 clock inputs;
-left input reference clock as indicated by <&k3_clks 153 4>, external
-reference clock as indicated by <&k3_clks 153 1> and right input
-reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
-right input of SERDES0 is connected to the left output of SERDES1).
-
-SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
-first refers to the CMU reference clock, second refers to the left output
-reference clock and the third refers to the right output reference clock.
-
-The assigned-clocks and assigned-clock-parents is used here to set the
-parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
-CMU reference clock to left input reference clock.
-
-serdes0: serdes@900000 {
-	compatible = "ti,phy-am654-serdes";
-	reg = <0x0 0x900000 0x0 0x2000>;
-	reg-names = "serdes";
-	#phy-cells = <2>;
-	power-domains = <&k3_pds 153>;
-	clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
-			<&serdes1 AM654_SERDES_LO_REFCLK>;
-	clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
-				"serdes0_ro_refclk";
-	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
-	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
-	ti,serdes-clk = <&serdes0_clk>;
-	mux-controls = <&serdes_mux 0>;
-	#clock-cells = <1>;
-};
-
-Example for PCIe consumer node using the SERDES PHY specifier is given below.
-&pcie0_rc {
-        num-lanes = <2>;
-        phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
-        phy-names = "pcie-phy0", "pcie-phy1";
-};

Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM654 SERDES binding
+
+description:
+  This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
+  to be used with either PCIe or USB or SGMII.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,phy-am654-serdes
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: serdes
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description:
+      Three input clocks referring to left input reference clock, refclk and right input reference
+      clock.
+
+  assigned-clocks:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+  assigned-clock-parents:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  '#phy-cells':
+    const: 2
+    description:
+      The 1st cell corresponds to the phy type (should be one of the types specified in
+      include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function.
+
+  ti,serdes-clk:
+    description: Phandle to the SYSCON entry required for configuring SERDES clock selection.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#clock-cells':
+    const: 1
+
+  mux-controls:
+    maxItems: 1
+    description: Phandle to the SYSCON entry required for configuring SERDES lane function.
+
+  clock-output-names:
+    oneOf:
+      - description: Clock output names for SERDES 0
+        items:
+          - const: serdes0_cmu_refclk
+          - const: serdes0_lo_refclk
+          - const: serdes0_ro_refclk
+      - description: Clock output names for SERDES 1
+        items:
+          - const: serdes1_cmu_refclk
+          - const: serdes1_lo_refclk
+          - const: serdes1_ro_refclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - assigned-clocks
+  - assigned-clock-parents
+  - ti,serdes-clk
+  - mux-controls
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy-am654-serdes.h>
+
+    serdes0: serdes@900000 {
+      compatible = "ti,phy-am654-serdes";
+      reg = <0x900000 0x2000>;
+      reg-names = "serdes";
+      #phy-cells = <2>;
+      power-domains = <&k3_pds 153>;
+      clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
+               <&serdes1 AM654_SERDES_LO_REFCLK>;
+      clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+      assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+      assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+      ti,serdes-clk = <&serdes0_clk>;
+      mux-controls = <&serdes_mux 0>;
+      #clock-cells = <1>;
+    };