arm64: dts: qcom: sm8250: Use QMP property to control load state

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8250 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-10-git-send-email-sibis@codeaurora.org

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -13,7 +13,6 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -2088,13 +2087,14 @@ slpi: remoteproc@5c00000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_slpi_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2154,12 +2154,12 @@ cdsp: remoteproc@8300000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd SM8250_CX>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd SM8250_CX>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2907,7 +2907,6 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 					IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -3824,13 +3823,14 @@ adsp: remoteproc@17300000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_adsp_out 0>;
 			qcom,smem-state-names = "stop";