Commit b75ab05a authored by Shubhashree Dhar's avatar Shubhashree Dhar Committed by Rob Clark

msm:disp:dpu1: add scaler support on SC7180 display

Add scaler support for display driver.

This patch has dependency on the below series

https://patchwork.kernel.org/patch/11260267/Co-developed-by: default avatarRaviteja Tamatam <travitej@codeaurora.org>
Signed-off-by: default avatarRaviteja Tamatam <travitej@codeaurora.org>
Signed-off-by: default avatarShubhashree Dhar <dhar@codeaurora.org>
Signed-off-by: default avatarRob Clark <robdclark@chromium.org>
parent 42a558b7
......@@ -183,7 +183,7 @@ static const struct dpu_sspp_blks_common sdm845_sspp_common = {
.maxvdeciexp = MAX_VERT_DECIMATION,
};
#define _VIG_SBLK(num, sdma_pri) \
#define _VIG_SBLK(num, sdma_pri, qseed_ver) \
{ \
.common = &sdm845_sspp_common, \
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
......@@ -192,7 +192,7 @@ static const struct dpu_sspp_blks_common sdm845_sspp_common = {
.src_blk = {.name = STRCAT("sspp_src_", num), \
.id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \
.scaler_blk = {.name = STRCAT("sspp_scaler", num), \
.id = DPU_SSPP_SCALER_QSEED3, \
.id = qseed_ver, \
.base = 0xa00, .len = 0xa0,}, \
.csc_blk = {.name = STRCAT("sspp_csc", num), \
.id = DPU_SSPP_CSC_10BIT, \
......@@ -217,10 +217,14 @@ static const struct dpu_sspp_blks_common sdm845_sspp_common = {
.virt_num_formats = ARRAY_SIZE(plane_formats), \
}
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = _VIG_SBLK("0", 5);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 = _VIG_SBLK("1", 6);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 = _VIG_SBLK("2", 7);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 = _VIG_SBLK("3", 8);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 =
_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 =
_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3);
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_0 = _DMA_SBLK("8", 1);
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_1 = _DMA_SBLK("9", 2);
......@@ -258,9 +262,12 @@ static const struct dpu_sspp_cfg sdm845_sspp[] = {
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =
_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4);
static const struct dpu_sspp_cfg sc7180_sspp[] = {
SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
......
......@@ -94,6 +94,7 @@ enum {
* @DPU_SSPP_SRC Src and fetch part of the pipes,
* @DPU_SSPP_SCALER_QSEED2, QSEED2 algorithm support
* @DPU_SSPP_SCALER_QSEED3, QSEED3 alogorithm support
* @DPU_SSPP_SCALER_QSEED4, QSEED4 algorithm support
* @DPU_SSPP_SCALER_RGB, RGB Scaler, supported by RGB pipes
* @DPU_SSPP_CSC, Support of Color space converion
* @DPU_SSPP_CSC_10BIT, Support of 10-bit Color space conversion
......@@ -326,6 +327,7 @@ struct dpu_sspp_blks_common {
* @maxupscale: maxupscale ratio supported
* @smart_dma_priority: hw priority of rect1 of multirect pipe
* @max_per_pipe_bw: maximum allowable bandwidth of this pipe in kBps
* @qseed_ver: qseed version
* @src_blk:
* @scaler_blk:
* @csc_blk:
......@@ -346,6 +348,7 @@ struct dpu_sspp_sub_blks {
u32 maxupscale;
u32 smart_dma_priority;
u32 max_per_pipe_bw;
u32 qseed_ver;
struct dpu_src_blk src_blk;
struct dpu_scaler_blk scaler_blk;
struct dpu_pp_blk csc_blk;
......
......@@ -132,6 +132,7 @@
/* traffic shaper clock in Hz */
#define TS_CLK 19200000
static int _sspp_subblk_offset(struct dpu_hw_pipe *ctx,
int s_id,
u32 *idx)
......@@ -657,7 +658,8 @@ static void _setup_layer_ops(struct dpu_hw_pipe *c,
test_bit(DPU_SSPP_SMART_DMA_V2, &c->cap->features))
c->ops.setup_multirect = dpu_hw_sspp_setup_multirect;
if (test_bit(DPU_SSPP_SCALER_QSEED3, &features)) {
if (test_bit(DPU_SSPP_SCALER_QSEED3, &features) ||
test_bit(DPU_SSPP_SCALER_QSEED4, &features)) {
c->ops.setup_scaler = _dpu_hw_sspp_setup_scaler3;
c->ops.get_scaler_ver = _dpu_hw_sspp_get_scaler3_ver;
}
......
......@@ -27,7 +27,8 @@ struct dpu_hw_pipe;
*/
#define DPU_SSPP_SCALER ((1UL << DPU_SSPP_SCALER_RGB) | \
(1UL << DPU_SSPP_SCALER_QSEED2) | \
(1UL << DPU_SSPP_SCALER_QSEED3))
(1UL << DPU_SSPP_SCALER_QSEED3) | \
(1UL << DPU_SSPP_SCALER_QSEED4))
/**
* Component indices
......
......@@ -53,8 +53,13 @@ enum {
R_MAX
};
/*
* Default Preload Values
*/
#define DPU_QSEED3_DEFAULT_PRELOAD_H 0x4
#define DPU_QSEED3_DEFAULT_PRELOAD_V 0x3
#define DPU_QSEED4_DEFAULT_PRELOAD_V 0x2
#define DPU_QSEED4_DEFAULT_PRELOAD_H 0x4
#define DEFAULT_REFRESH_RATE 60
......@@ -477,8 +482,16 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
scale_cfg->src_width[i] /= chroma_subsmpl_h;
scale_cfg->src_height[i] /= chroma_subsmpl_v;
}
scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
if (pdpu->pipe_hw->cap->features &
BIT(DPU_SSPP_SCALER_QSEED4)) {
scale_cfg->preload_x[i] = DPU_QSEED4_DEFAULT_PRELOAD_H;
scale_cfg->preload_y[i] = DPU_QSEED4_DEFAULT_PRELOAD_V;
} else {
scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
}
pstate->pixel_ext.num_ext_pxls_top[i] =
scale_cfg->src_height[i];
pstate->pixel_ext.num_ext_pxls_left[i] =
......@@ -1337,7 +1350,8 @@ static int _dpu_plane_init_debugfs(struct drm_plane *plane)
pdpu->debugfs_root, &pdpu->debugfs_src);
if (cfg->features & BIT(DPU_SSPP_SCALER_QSEED3) ||
cfg->features & BIT(DPU_SSPP_SCALER_QSEED2)) {
cfg->features & BIT(DPU_SSPP_SCALER_QSEED2) ||
cfg->features & BIT(DPU_SSPP_SCALER_QSEED4)) {
dpu_debugfs_setup_regset32(&pdpu->debugfs_scaler,
sblk->scaler_blk.base + cfg->base,
sblk->scaler_blk.len,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment