arm64: dts: rockchip: fix regulator-gpio states array

A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long

dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts

@@ -84,8 +84,8 @@ vcc_sdmmc: vcc-sdmmc {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 

arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts

@@ -77,8 +77,8 @@ vcc_io_sdio: sdmmcio-regulator {
 		regulator-settling-time-us = <5000>;
 		regulator-type = "voltage";
 		startup-delay-us = <2000>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		vin-supply = <&vcc_io_33>;
 	};
 

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts

@@ -50,8 +50,8 @@ vcc_sd: sdmmc-regulator {
 	vcc_sdio: sdmmcio-regulator {
 		compatible = "regulator-gpio";
 		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		regulator-name = "vcc_sdio";
 		regulator-type = "voltage";
 		regulator-min-microvolt = <1800000>;

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

@@ -245,7 +245,7 @@ &ppvar_gpu_pwm {
 };
 
 &ppvar_sd_card_io {
-	states = <1800000 0x0 3300000 0x1>;
+	states = <1800000 0x0>, <3300000 0x1>;
 	regulator-max-microvolt = <3300000>;
 };
 

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -252,8 +252,8 @@ ppvar_sd_card_io: ppvar-sd-card-io {
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;