xHCI 1.0: Setup Stage TRB Transfer Type flag

Setup Stage Transfer Type field is added to indicate the presence and the
direction of the Data Stage TD, and determines the direction of the Status
Stage TD so the wLength length field should be ignored by the xHC.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

drivers/usb/host/xhci-ring.c

@@ -3053,6 +3053,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
 	if (start_cycle == 0)
 		field |= 0x1;
+
+	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
+	if (xhci->hci_version == 0x100) {
+		if (urb->transfer_buffer_length > 0) {
+			if (setup->bRequestType & USB_DIR_IN)
+				field |= TRB_TX_TYPE(TRB_DATA_IN);
+			else
+				field |= TRB_TX_TYPE(TRB_DATA_OUT);
+		}
+	}
+
 	queue_trb(xhci, ep_ring, false, true,
 		  setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
 		  le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,

drivers/usb/host/xhci.h

@@ -967,6 +967,9 @@ struct xhci_event_cmd {
 
 /* Control transfer TRB specific fields */
 #define TRB_DIR_IN		(1<<16)
+#define	TRB_TX_TYPE(p)		((p) << 16)
+#define	TRB_DATA_OUT		2
+#define	TRB_DATA_IN		3
 
 /* Isochronous TRB specific fields */
 #define TRB_SIA			(1<<31)