Commit b884026a authored by Olof Johansson's avatar Olof Johansson

Merge branch 'next/dt64' into next/dt

* next/dt64: (233 commits)
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  arm64: dts: rockchip: add rk3328-rock64 board
  arm64: dts: rockchip: add rk3328 pdm node
  ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
  ARM64: dts: meson-gx: Add AO CEC nodes
  ARM64: dts: meson-gx: update AO clkc to new bindings
  arm64: dts: rockchip: add more rk3399 iommu nodes
  arm64: dts: rockchip: add rk3368 iommu nodes
  arm64: dts: rockchip: add rk3328 iommu nodes
  arm64: zynqmp: Add generic compatible string for I2C EEPROM
  ...
parents e3e36ab3 c911171a
Amlogic MesonX device tree bindings Amlogic MesonX device tree bindings
------------------------------------------- -------------------------------------------
Work in progress statement:
Device tree files and bindings applying to Amlogic SoCs and boards are
considered "unstable". Any Amlogic device tree binding may change at
any time. Be sure to use a device tree binary and a kernel image
generated from the same source tree.
Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
stable binding/ABI.
---------------------------------------------------------------
Boards with the Amlogic Meson6 SoC shall have the following properties: Boards with the Amlogic Meson6 SoC shall have the following properties:
Required root node property: Required root node property:
compatible: "amlogic,meson6" compatible: "amlogic,meson6"
......
Marvell Armada 8KPlus Platforms Device Tree Bindings
----------------------------------------------------
Boards using a SoC of the Marvell Armada 8KP families must carry
the following root node property:
- compatible, with one of the following values:
- "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810"
when the SoC being used is the Armada 8080
Example:
compatible = "marvell,armada-8080-db", "marvell,armada-8080",
"marvell,armada-ap810-octa", "marvell,armada-ap810"
...@@ -6,6 +6,7 @@ Required root node property: ...@@ -6,6 +6,7 @@ Required root node property:
compatible: Must contain one of compatible: Must contain one of
"mediatek,mt2701" "mediatek,mt2701"
"mediatek,mt2712"
"mediatek,mt6580" "mediatek,mt6580"
"mediatek,mt6589" "mediatek,mt6589"
"mediatek,mt6592" "mediatek,mt6592"
...@@ -25,6 +26,9 @@ Supported boards: ...@@ -25,6 +26,9 @@ Supported boards:
- Evaluation board for MT2701: - Evaluation board for MT2701:
Required root node properties: Required root node properties:
- compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
- Evaluation board for MT2712:
Required root node properties:
- compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
- Evaluation board for MT6580: - Evaluation board for MT6580:
Required root node properties: Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
......
...@@ -134,6 +134,10 @@ Rockchip platforms device tree bindings ...@@ -134,6 +134,10 @@ Rockchip platforms device tree bindings
Required root node properties: Required root node properties:
- compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
- Pine64 Rock64 board:
Required root node properties:
- compatible = "pine64,rock64", "rockchip,rk3328";
- Rockchip PX3 Evaluation board: - Rockchip PX3 Evaluation board:
Required root node properties: Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
...@@ -173,6 +177,14 @@ Rockchip platforms device tree bindings ...@@ -173,6 +177,14 @@ Rockchip platforms device tree bindings
Required root node properties: Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
- Rockchip RK3399 Sapphire Excavator board:
Required root node properties:
- compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
- Theobroma Systems RK3399-Q7 Haikou Baseboard:
Required root node properties:
- compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399";
- Tronsmart Orion R68 Meta - Tronsmart Orion R68 Meta
Required root node properties: Required root node properties:
- compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
...@@ -16,18 +16,25 @@ Required Properties: ...@@ -16,18 +16,25 @@ Required Properties:
mapped region. mapped region.
- #clock-cells: should be 1. - #clock-cells: should be 1.
- #reset-cells: should be 1.
Each clock is assigned an identifier and client nodes can use this identifier Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
used in device tree sources. used in device tree sources.
Similarly a preprocessor macro for each reset line is defined in
dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
device tree sources).
Example: Clock controller node: Example: Clock controller node:
clkc: clock-controller@c1104000 { clkc: clock-controller@c1104000 {
#clock-cells = <1>;
compatible = "amlogic,meson8b-clkc"; compatible = "amlogic,meson8b-clkc";
reg = <0xc1108000 0x4>, <0xc1104000 0x460>; reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
#clock-cells = <1>;
#reset-cells = <1>;
}; };
......
...@@ -17,6 +17,7 @@ Required properties: ...@@ -17,6 +17,7 @@ Required properties:
* which must be preceded by one of the following vendor specifics: * which must be preceded by one of the following vendor specifics:
+ "amlogic,meson-gxm-mali" + "amlogic,meson-gxm-mali"
+ "rockchip,rk3288-mali" + "rockchip,rk3288-mali"
+ "rockchip,rk3399-mali"
- reg : Physical base address of the device and length of the register area. - reg : Physical base address of the device and length of the register area.
......
...@@ -17,6 +17,7 @@ Required properties: ...@@ -17,6 +17,7 @@ Required properties:
"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
"mediatek,mt6577-sysirq": for MT6577 "mediatek,mt6577-sysirq": for MT6577
"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
- interrupt-controller : Identifies the node as an interrupt controller - interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
Required properties: Required properties:
- compatible should contain: - compatible should contain:
* "mediatek,mt2701-uart" for MT2701 compatible UARTS * "mediatek,mt2701-uart" for MT2701 compatible UARTS
* "mediatek,mt2712-uart" for MT2712 compatible UARTS
* "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6580-uart" for MT6580 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS
......
...@@ -3,9 +3,9 @@ Mediatek SoCs Watchdog timer ...@@ -3,9 +3,9 @@ Mediatek SoCs Watchdog timer
Required properties: Required properties:
- compatible should contain: - compatible should contain:
* "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
* "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701, "mediatek,mt6589-wdt": for MT6589
MT6589) "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
- reg : Specifies base physical address and size of the registers. - reg : Specifies base physical address and size of the registers.
......
...@@ -184,6 +184,12 @@ config ARCH_R8A7796 ...@@ -184,6 +184,12 @@ config ARCH_R8A7796
help help
This enables support for the Renesas R-Car M3-W SoC. This enables support for the Renesas R-Car M3-W SoC.
config ARCH_R8A77995
bool "Renesas R-Car D3 SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car D3 SoC.
config ARCH_STRATIX10 config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family" bool "Altera's Stratix 10 SoCFPGA Family"
help help
......
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
......
/*
* Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP803 Integrated Power Management Chip
* http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
*/
&axp803 {
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
reg_aldo1: aldo1 {
regulator-name = "aldo1";
};
reg_aldo2: aldo2 {
regulator-name = "aldo2";
};
reg_aldo3: aldo3 {
regulator-name = "aldo3";
};
reg_dc1sw: dc1sw {
regulator-name = "dc1sw";
};
reg_dcdc1: dcdc1 {
regulator-name = "dcdc1";
};
reg_dcdc2: dcdc2 {
regulator-name = "dcdc2";
};
reg_dcdc3: dcdc3 {
regulator-name = "dcdc3";
};
reg_dcdc4: dcdc4 {
regulator-name = "dcdc4";
};
reg_dcdc5: dcdc5 {
regulator-name = "dcdc5";
};
reg_dcdc6: dcdc6 {
regulator-name = "dcdc6";
};
reg_dldo1: dldo1 {
regulator-name = "dldo1";
};
reg_dldo2: dldo2 {
regulator-name = "dldo2";
};
reg_dldo3: dldo3 {
regulator-name = "dldo3";
};
reg_dldo4: dldo4 {
regulator-name = "dldo4";
};
reg_eldo1: eldo1 {
regulator-name = "eldo1";
};
reg_eldo2: eldo2 {
regulator-name = "eldo2";
};
reg_eldo3: eldo3 {
regulator-name = "eldo3";
};
reg_fldo1: fldo1 {
regulator-name = "fldo1";
};
reg_fldo2: fldo2 {
regulator-name = "fldo2";
};
reg_ldo_io0: ldo-io0 {
regulator-name = "ldo-io0";
status = "disabled";
};
reg_ldo_io1: ldo-io1 {
regulator-name = "ldo-io1";
status = "disabled";
};
reg_rtc_ldo: rtc-ldo {
/* RTC_LDO is a fixed, always-on regulator */
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "rtc-ldo";
};
};
};
...@@ -59,14 +59,16 @@ chosen { ...@@ -59,14 +59,16 @@ chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
reg_vcc3v3: vcc3v3 { wifi_pwrseq: wifi_pwrseq {
compatible = "regulator-fixed"; compatible = "mmc-pwrseq-simple";
regulator-name = "vcc3v3"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
}; };
}; };
&ehci1 {
status = "okay";
};
&i2c1 { &i2c1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>; pinctrl-0 = <&i2c1_pins>;
...@@ -80,7 +82,7 @@ &i2c1_pins { ...@@ -80,7 +82,7 @@ &i2c1_pins {
&mmc0 { &mmc0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>; pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted; cd-inverted;
disable-wp; disable-wp;
...@@ -91,22 +93,143 @@ &mmc0 { ...@@ -91,22 +93,143 @@ &mmc0 {
&mmc1 { &mmc1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>; pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>; bus-width = <4>;
non-removable; non-removable;
status = "okay"; status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
}; };
&mmc2 { &mmc2 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>; pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_dcdc1>;
bus-width = <8>; bus-width = <8>;
non-removable; non-removable;
cap-mmc-hw-reset; cap-mmc-hw-reset;
status = "okay"; status = "okay";
}; };
&ohci1 {
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-phy";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>; pinctrl-0 = <&uart0_pins_a>;
...@@ -118,3 +241,7 @@ &uart1 { ...@@ -118,3 +241,7 @@ &uart1 {
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay"; status = "okay";
}; };
&usbphy {
status = "okay";
};
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "FriendlyARM NanoPi A64";
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
};
&i2c1_pins {
bias-pull-up;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;
bus-width = <4>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi";
};
&reg_dldo4 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
status = "okay";
};
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Olimex A64-Olinuxino";
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;
bus-width = <4>;
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-pe";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-ddr3";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
...@@ -107,6 +107,118 @@ &ohci1 { ...@@ -107,6 +107,118 @@ &ohci1 {
status = "okay"; status = "okay";
}; };
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-phy";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
/*
* The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
* work at 1.35V with less power consumption.
* As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
*/
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
/* On Exp and Euler connectors */ /* On Exp and Euler connectors */
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
......
...@@ -95,6 +95,28 @@ &ohci1 { ...@@ -95,6 +95,28 @@ &ohci1 {
status = "okay"; status = "okay";
}; };
&reg_dc1sw {
regulator-name = "vcc-phy";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>; pinctrl-0 = <&uart0_pins_a>;
......
...@@ -63,3 +63,89 @@ &mmc0 { ...@@ -63,3 +63,89 @@ &mmc0 {
bus-width = <4>; bus-width = <4>;
status = "okay"; status = "okay";
}; };
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_eldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vdd-1v8-lpddr";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
...@@ -467,6 +467,15 @@ rtc: rtc@1f00000 { ...@@ -467,6 +467,15 @@ rtc: rtc@1f00000 {
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
}; };
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun50i-a64-r-intc",
"allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
r_ccu: clock@1f01400 { r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu"; compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>; reg = <0x01f01400 0x100>;
......
...@@ -121,6 +121,13 @@ hdmi_connector_in: endpoint { ...@@ -121,6 +121,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
......
...@@ -225,7 +225,7 @@ reset: reset-controller@4404 { ...@@ -225,7 +225,7 @@ reset: reset-controller@4404 {
}; };
uart_A: serial@84c0 { uart_A: serial@84c0 {
compatible = "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>; reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>; clocks = <&xtal>;
...@@ -233,7 +233,7 @@ uart_A: serial@84c0 { ...@@ -233,7 +233,7 @@ uart_A: serial@84c0 {
}; };
uart_B: serial@84dc { uart_B: serial@84dc {
compatible = "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>; reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>; clocks = <&xtal>;
...@@ -279,7 +279,7 @@ pwm_ef: pwm@86c0 { ...@@ -279,7 +279,7 @@ pwm_ef: pwm@86c0 {
}; };
uart_C: serial@8700 { uart_C: serial@8700 {
compatible = "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>; reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>; clocks = <&xtal>;
...@@ -367,26 +367,40 @@ aobus: aobus@c8100000 { ...@@ -367,26 +367,40 @@ aobus: aobus@c8100000 {
#size-cells = <2>; #size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
clkc_AO: clock-controller@040 { sysctrl_AO: sys-ctrl@0 {
compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
reg = <0x0 0x00040 0x0 0x4>; reg = <0x0 0x0 0x0 0x100>;
#clock-cells = <1>;
#reset-cells = <1>; clkc_AO: clock-controller {
compatible = "amlogic,meson-gx-aoclkc";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
cec_AO: cec@100 {
compatible = "amlogic,meson-gx-ao-cec";
reg = <0x0 0x00100 0x0 0x14>;
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
};
sec_AO: ao-secure@140 {
compatible = "amlogic,meson-gx-ao-secure", "syscon";
reg = <0x0 0x140 0x0 0x140>;
amlogic,has-chip-id;
}; };
uart_AO: serial@4c0 { uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>; reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled"; status = "disabled";
}; };
uart_AO_B: serial@4e0 { uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>; reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled"; status = "disabled";
}; };
...@@ -437,9 +451,9 @@ hiubus: hiubus@c883c000 { ...@@ -437,9 +451,9 @@ hiubus: hiubus@c883c000 {
mailbox: mailbox@404 { mailbox: mailbox@404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>; reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>; <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>; #mbox-cells = <1>;
}; };
}; };
...@@ -448,7 +462,7 @@ ethmac: ethernet@c9410000 { ...@@ -448,7 +462,7 @@ ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000 reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>; 0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>; interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "macirq"; interrupt-names = "macirq";
status = "disabled"; status = "disabled";
}; };
......
...@@ -175,6 +175,64 @@ &ir { ...@@ -175,6 +175,64 @@ &ir {
pinctrl-names = "default"; pinctrl-names = "default";
}; };
&pinctrl_aobus {
gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
"VCCK En", "CON1 Header Pin31",
"I2S Header Pin6", "IR In", "I2S Header Pin7",
"I2S Header Pin3", "I2S Header Pin4",
"I2S Header Pin5", "HDMI CEC", "SYS LED";
};
&pinctrl_periphs {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
"Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
"Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
"Eth PHY nRESET", "Eth PHY Intc",
/* Bank GPIOH */
"HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
"CON1 Header Pin33",
/* Bank BOOT */
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
"eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
"eMMC Reset", "eMMC CMD",
"", "", "", "", "eMMC DS",
"", "",
/* Bank CARD */
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
"SDCard D3", "SDCard D2", "SDCard Det",
/* Bank GPIODV */
"", "", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "",
"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
"VDDEE Regulator", "VCCK Regulator",
/* Bank GPIOY */
"CON1 Header Pin7", "CON1 Header Pin11",
"CON1 Header Pin13", "CON1 Header Pin15",
"CON1 Header Pin18", "CON1 Header Pin19",
"CON1 Header Pin22", "CON1 Header Pin21",
"CON1 Header Pin24", "CON1 Header Pin23",
"CON1 Header Pin26", "CON1 Header Pin29",
"CON1 Header Pin32", "CON1 Header Pin8",
"CON1 Header Pin10", "CON1 Header Pin16",
"CON1 Header Pin12",
/* Bank GPIOX */
"WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
"WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
"WIFI Power Enable", "WIFI WAKE HOST",
"Bluetooth PCM DOUT", "Bluetooth PCM DIN",
"Bluetooth PCM SYNC", "Bluetooth PCM CLK",
"Bluetooth UART TX", "Bluetooth UART RX",
"Bluetooth UART CTS", "Bluetooth UART RTS",
"", "", "", "WIFI 32K", "Bluetooth Enable",
"Bluetooth WAKE HOST",
/* Bank GPIOCLK */
"", "CON1 Header Pin35", "", "",
/* GPIO_TEST_N */
"";
};
&pwm_ef { &pwm_ef {
status = "okay"; status = "okay";
pinctrl-0 = <&pwm_e_pins>; pinctrl-0 = <&pwm_e_pins>;
......
...@@ -171,6 +171,13 @@ cvbs_vdac_out: endpoint { ...@@ -171,6 +171,13 @@ cvbs_vdac_out: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&ethmac { &ethmac {
status = "okay"; status = "okay";
pinctrl-0 = <&eth_rmii_pins>; pinctrl-0 = <&eth_rmii_pins>;
......
...@@ -84,6 +84,9 @@ vddio_card: gpio-regulator { ...@@ -84,6 +84,9 @@ vddio_card: gpio-regulator {
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0 states = <1800000 0
3300000 1>; 3300000 1>;
regulator-settling-time-up-us = <10000>;
regulator-settling-time-down-us = <150000>;
}; };
vddio_boot: regulator-vddio_boot { vddio_boot: regulator-vddio_boot {
...@@ -148,6 +151,13 @@ hdmi_connector_in: endpoint { ...@@ -148,6 +151,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
......
...@@ -108,6 +108,12 @@ hdmi_connector_in: endpoint { ...@@ -108,6 +108,12 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
......
...@@ -307,6 +307,15 @@ spifc: spi@8c80 { ...@@ -307,6 +307,15 @@ spifc: spi@8c80 {
}; };
}; };
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
};
&ethmac { &ethmac {
clocks = <&clkc CLKID_ETH>, clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_FCLK_DIV2>,
...@@ -682,6 +691,31 @@ &spifc { ...@@ -682,6 +691,31 @@ &spifc {
clocks = <&clkc CLKID_SPI>; clocks = <&clkc CLKID_SPI>;
}; };
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&vpu { &vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
}; };
...@@ -97,6 +97,13 @@ hdmi_connector_in: endpoint { ...@@ -97,6 +97,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
/* P230 has exclusive choice between internal or external PHY */ /* P230 has exclusive choice between internal or external PHY */
&ethmac { &ethmac {
pinctrl-0 = <&eth_pins>; pinctrl-0 = <&eth_pins>;
...@@ -124,7 +131,6 @@ external_phy: ethernet-phy@0 { ...@@ -124,7 +131,6 @@ external_phy: ethernet-phy@0 {
}; };
}; };
&hdmi_tx { &hdmi_tx {
status = "okay"; status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
......
...@@ -67,6 +67,13 @@ hdmi_connector_in: endpoint { ...@@ -67,6 +67,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&hdmi_tx { &hdmi_tx {
status = "okay"; status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
...@@ -105,6 +112,62 @@ &ir { ...@@ -105,6 +112,62 @@ &ir {
linux,rc-map-name = "rc-geekbox"; linux,rc-map-name = "rc-geekbox";
}; };
&pinctrl_aobus {
gpio-line-names = "UART TX",
"UART RX",
"Power Key In",
"J9 Header Pin35",
"J9 Header Pin16",
"J9 Header Pin15",
"J9 Header Pin33",
"IR In",
"HDMI CEC",
"SYS LED";
};
&pinctrl_periphs {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
"Power OFF",
"VCCK Enable",
/* Bank GPIOH */
"HDMI HPD", "HDMI SDA", "HDMI SCL",
"HDMI_5V_EN", "SPDIF",
"J9 Header Pin37",
"J9 Header Pin30",
"J9 Header Pin29",
"J9 Header Pin32",
"J9 Header Pin31",
/* Bank BOOT */
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
"eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
"eMMC Clk", "eMMC Reset", "eMMC CMD",
"", "BOOT_MODE", "", "", "eMMC Data Strobe",
/* Bank CARD */
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
"SDCard D3", "SDCard D2", "SDCard Det",
/* Bank GPIODV */
"", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "",
"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
"VCCK Regulator", "VDDEE Regulator",
/* Bank GPIOX */
"WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
"WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
"WIFI Power Enable", "WIFI WAKE HOST",
"Bluetooth PCM DOUT", "Bluetooth PCM DIN",
"Bluetooth PCM SYNC", "Bluetooth PCM CLK",
"Bluetooth UART TX", "Bluetooth UART RX",
"Bluetooth UART CTS", "Bluetooth UART RTS",
"WIFI 32K", "Bluetooth Enable",
"Bluetooth WAKE HOST",
/* Bank GPIOCLK */
"", "J9 Header Pin39",
/* GPIO_TEST_N */
"";
};
&pwm_AO_ab { &pwm_AO_ab {
status = "okay"; status = "okay";
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
......
...@@ -101,6 +101,13 @@ vddio_boot: regulator-vddio_boot { ...@@ -101,6 +101,13 @@ vddio_boot: regulator-vddio_boot {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
...@@ -129,6 +136,63 @@ hdmi_tx_tmds_out: endpoint { ...@@ -129,6 +136,63 @@ hdmi_tx_tmds_out: endpoint {
}; };
}; };
&pinctrl_aobus {
gpio-line-names = "UART TX",
"UART RX",
"Blue LED",
"SDCard Voltage Switch",
"7J1 Header Pin5",
"7J1 Header Pin3",
"7J1 Header Pin12",
"IR In",
"9J3 Switch HDMI CEC/7J1 Header Pin11",
"7J1 Header Pin13";
};
&pinctrl_periphs {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
"Eth Link LED", "Eth Activity LED",
/* Bank GPIOH */
"HDMI HPD", "HDMI SDA", "HDMI SCL",
"HDMI_5V_EN", "9J1 Header Pin2",
"Analog Audio Mute",
"2J3 Header Pin6",
"2J3 Header Pin5",
"2J3 Header Pin4",
"2J3 Header Pin3",
/* Bank BOOT */
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
"eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
"eMMC Clk", "eMMC Reset", "eMMC CMD",
"ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
/* Bank CARD */
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
"SDCard D3", "SDCard D2", "SDCard Det",
/* Bank GPIODV */
"", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "",
"Green LED", "VCCK Enable",
"7J1 Header Pin27", "7J1 Header Pin28",
"VCCK Regulator", "VDDEE Regulator",
/* Bank GPIOX */
"7J1 Header Pin22", "7J1 Header Pin26",
"7J1 Header Pin36", "7J1 Header Pin38",
"7J1 Header Pin40", "7J1 Header Pin37",
"7J1 Header Pin33", "7J1 Header Pin35",
"7J1 Header Pin19", "7J1 Header Pin21",
"7J1 Header Pin24", "7J1 Header Pin23",
"7J1 Header Pin8", "7J1 Header Pin10",
"7J1 Header Pin16", "7J1 Header Pin18",
"7J1 Header Pin32", "7J1 Header Pin29",
"7J1 Header Pin31",
/* Bank GPIOCLK */
"7J1 Header Pin7", "",
/* GPIO_TEST_N */
"7J1 Header Pin15";
};
/* SD card */ /* SD card */
&sd_emmc_b { &sd_emmc_b {
status = "okay"; status = "okay";
......
...@@ -140,6 +140,13 @@ hdmi_connector_in: endpoint { ...@@ -140,6 +140,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
......
...@@ -71,6 +71,13 @@ hdmi_connector_in: endpoint { ...@@ -71,6 +71,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
......
...@@ -43,6 +43,7 @@ ...@@ -43,6 +43,7 @@
#include "meson-gx.dtsi" #include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h> #include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h> #include <dt-bindings/gpio/meson-gxl-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
...@@ -207,6 +208,15 @@ mux { ...@@ -207,6 +208,15 @@ mux {
}; };
}; };
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
};
&hdmi_tx { &hdmi_tx {
compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>, resets = <&reset RESET_HDMITX_CAPB3>,
...@@ -623,6 +633,31 @@ &spifc { ...@@ -623,6 +633,31 @@ &spifc {
clocks = <&clkc CLKID_SPI>; clocks = <&clkc CLKID_SPI>;
}; };
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&vpu { &vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
}; };
...@@ -113,6 +113,13 @@ hdmi_connector_in: endpoint { ...@@ -113,6 +113,13 @@ hdmi_connector_in: endpoint {
}; };
}; };
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port { &cvbs_vdac_port {
cvbs_vdac_out: endpoint { cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>; remote-endpoint = <&cvbs_connector_in>;
......
...@@ -117,6 +117,10 @@ cpu7: cpu@103 { ...@@ -117,6 +117,10 @@ cpu7: cpu@103 {
}; };
}; };
&clkc_AO {
compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
};
&saradc { &saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
}; };
......
...@@ -626,6 +626,7 @@ pcie0: pcie@1f2b0000 { ...@@ -626,6 +626,7 @@ pcie0: pcie@1f2b0000 {
0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */ 0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
...@@ -651,6 +652,7 @@ pcie1: pcie@1f2c0000 { ...@@ -651,6 +652,7 @@ pcie1: pcie@1f2c0000 {
0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
......
...@@ -626,6 +626,7 @@ pcie0: pcie@1f2b0000 { ...@@ -626,6 +626,7 @@ pcie0: pcie@1f2b0000 {
0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */ 0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
...@@ -651,6 +652,7 @@ pcie1: pcie@1f2c0000 { ...@@ -651,6 +652,7 @@ pcie1: pcie@1f2c0000 {
0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */ 0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
...@@ -676,6 +678,7 @@ pcie2: pcie@1f2d0000 { ...@@ -676,6 +678,7 @@ pcie2: pcie@1f2d0000 {
0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */ 0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
...@@ -701,6 +704,7 @@ pcie3: pcie@1f500000 { ...@@ -701,6 +704,7 @@ pcie3: pcie@1f500000 {
0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
...@@ -726,6 +730,7 @@ pcie4: pcie@1f510000 { ...@@ -726,6 +730,7 @@ pcie4: pcie@1f510000 {
0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */ 0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
......
...@@ -226,7 +226,7 @@ v2m_serial3: uart@0c0000 { ...@@ -226,7 +226,7 @@ v2m_serial3: uart@0c0000 {
clock-names = "uartclk", "apb_pclk"; clock-names = "uartclk", "apb_pclk";
}; };
virtio_block@0130000 { virtio-block@0130000 {
compatible = "virtio,mmio"; compatible = "virtio,mmio";
reg = <0x130000 0x200>; reg = <0x130000 0x200>;
interrupts = <42>; interrupts = <42>;
......
...@@ -201,7 +201,7 @@ stm_out_port: endpoint { ...@@ -201,7 +201,7 @@ stm_out_port: endpoint {
}; };
}; };
cpu_debug0: cpu_debug@22010000 { cpu_debug0: cpu-debug@22010000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x22010000 0x0 0x1000>; reg = <0x0 0x22010000 0x0 0x1000>;
...@@ -260,7 +260,7 @@ cluster0_funnel_in_port1: endpoint { ...@@ -260,7 +260,7 @@ cluster0_funnel_in_port1: endpoint {
}; };
}; };
cpu_debug1: cpu_debug@22110000 { cpu_debug1: cpu-debug@22110000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x22110000 0x0 0x1000>; reg = <0x0 0x22110000 0x0 0x1000>;
...@@ -283,7 +283,7 @@ cluster0_etm1_out_port: endpoint { ...@@ -283,7 +283,7 @@ cluster0_etm1_out_port: endpoint {
}; };
}; };
cpu_debug2: cpu_debug@23010000 { cpu_debug2: cpu-debug@23010000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23010000 0x0 0x1000>; reg = <0x0 0x23010000 0x0 0x1000>;
...@@ -356,7 +356,7 @@ cluster1_funnel_in_port3: endpoint { ...@@ -356,7 +356,7 @@ cluster1_funnel_in_port3: endpoint {
}; };
}; };
cpu_debug3: cpu_debug@23110000 { cpu_debug3: cpu-debug@23110000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23110000 0x0 0x1000>; reg = <0x0 0x23110000 0x0 0x1000>;
...@@ -379,7 +379,7 @@ cluster1_etm1_out_port: endpoint { ...@@ -379,7 +379,7 @@ cluster1_etm1_out_port: endpoint {
}; };
}; };
cpu_debug4: cpu_debug@23210000 { cpu_debug4: cpu-debug@23210000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23210000 0x0 0x1000>; reg = <0x0 0x23210000 0x0 0x1000>;
...@@ -402,7 +402,7 @@ cluster1_etm2_out_port: endpoint { ...@@ -402,7 +402,7 @@ cluster1_etm2_out_port: endpoint {
}; };
}; };
cpu_debug5: cpu_debug@23310000 { cpu_debug5: cpu-debug@23310000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell"; compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23310000 0x0 0x1000>; reg = <0x0 0x23310000 0x0 0x1000>;
...@@ -426,7 +426,7 @@ cluster1_etm3_out_port: endpoint { ...@@ -426,7 +426,7 @@ cluster1_etm3_out_port: endpoint {
}; };
replicator@20120000 { replicator@20120000 {
compatible = "qcom,coresight-replicator1x", "arm,primecell"; compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x20120000 0 0x1000>; reg = <0 0x20120000 0 0x1000>;
clocks = <&soc_smc50mhz>; clocks = <&soc_smc50mhz>;
......
...@@ -219,7 +219,7 @@ panel-timing { ...@@ -219,7 +219,7 @@ panel-timing {
}; };
}; };
virtio_block@0130000 { virtio-block@0130000 {
compatible = "virtio,mmio"; compatible = "virtio,mmio";
reg = <0x130000 0x200>; reg = <0x130000 0x200>;
interrupts = <42>; interrupts = <42>;
......
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
dts-dirs := stingray dts-dirs += northstar2
dts-dirs += stingray
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
clean-files := *.dtb clean-files := *.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
...@@ -72,6 +72,78 @@ &memory { /* Default DRAM banks */ ...@@ -72,6 +72,78 @@ &memory { /* Default DRAM banks */
<0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
}; };
&sata0 {
status = "okay";
};
&sata_phy0{
status = "okay";
};
&sata1 {
status = "okay";
};
&sata_phy1{
status = "okay";
};
&sata2 {
status = "okay";
};
&sata_phy2{
status = "okay";
};
&sata3 {
status = "okay";
};
&sata_phy3{
status = "okay";
};
&sata4 {
status = "okay";
};
&sata_phy4{
status = "okay";
};
&sata5 {
status = "okay";
};
&sata_phy5{
status = "okay";
};
&sata6 {
status = "okay";
};
&sata_phy6{
status = "okay";
};
&sata7 {
status = "okay";
};
&sata_phy7{
status = "okay";
};
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
reg = <0x10>;
};
};
};
&uart1 { &uart1 {
status = "okay"; status = "okay";
}; };
...@@ -102,6 +174,12 @@ pcf8574: pcf8574@20 { ...@@ -102,6 +174,12 @@ pcf8574: pcf8574@20 {
}; };
}; };
&enet {
phy-mode = "rgmii-id";
phy-handle = <&gphy0>;
status = "okay";
};
&nand { &nand {
status = "ok"; status = "ok";
nandcs@0 { nandcs@0 {
......
...@@ -39,6 +39,10 @@ / { ...@@ -39,6 +39,10 @@ / {
model = "Stingray Combo SVK (BCM958742K)"; model = "Stingray Combo SVK (BCM958742K)";
}; };
&gphy0 {
enet-phy-lane-swap;
};
&uart2 { &uart2 {
status = "okay"; status = "okay";
}; };
......
...@@ -38,3 +38,7 @@ / { ...@@ -38,3 +38,7 @@ / {
compatible = "brcm,bcm958742t", "brcm,stingray"; compatible = "brcm,bcm958742t", "brcm,stingray";
model = "Stingray SST100 (BCM958742T)"; model = "Stingray SST100 (BCM958742T)";
}; };
&gphy0 {
enet-phy-lane-swap;
};
/*
* BSD LICENSE
*
* Copyright(c) 2016-2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
fs4: fs4 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x67000000 0x00800000>;
crypto_mbox: crypto_mbox@00000000 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00000000 0x200000>;
msi-parent = <&gic_its 0x4100>;
#mbox-cells = <3>;
dma-coherent;
};
raid_mbox: raid_mbox@00400000 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00400000 0x200000>;
dma-coherent;
msi-parent = <&gic_its 0x4300>;
#mbox-cells = <3>;
};
raid0: raid@0 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 0 0x1 0xff00>,
<&raid_mbox 1 0x1 0xff00>,
<&raid_mbox 2 0x1 0xff00>,
<&raid_mbox 3 0x1 0xff00>;
};
raid1: raid@1 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 4 0x1 0xff00>,
<&raid_mbox 5 0x1 0xff00>,
<&raid_mbox 6 0x1 0xff00>,
<&raid_mbox 7 0x1 0xff00>;
};
raid2: raid@2 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 8 0x1 0xff00>,
<&raid_mbox 9 0x1 0xff00>,
<&raid_mbox 10 0x1 0xff00>,
<&raid_mbox 11 0x1 0xff00>;
};
raid3: raid@3 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 12 0x1 0xff00>,
<&raid_mbox 13 0x1 0xff00>,
<&raid_mbox 14 0x1 0xff00>,
<&raid_mbox 15 0x1 0xff00>;
};
raid4: raid@4 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 16 0x1 0xff00>,
<&raid_mbox 17 0x1 0xff00>,
<&raid_mbox 18 0x1 0xff00>,
<&raid_mbox 19 0x1 0xff00>;
};
raid5: raid@5 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 20 0x1 0xff00>,
<&raid_mbox 21 0x1 0xff00>,
<&raid_mbox 22 0x1 0xff00>,
<&raid_mbox 23 0x1 0xff00>;
};
raid6: raid@6 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 24 0x1 0xff00>,
<&raid_mbox 25 0x1 0xff00>,
<&raid_mbox 26 0x1 0xff00>,
<&raid_mbox 27 0x1 0xff00>;
};
raid7: raid@7 {
compatible = "brcm,iproc-sba-v2";
mboxes = <&raid_mbox 28 0x1 0xff00>,
<&raid_mbox 29 0x1 0xff00>,
<&raid_mbox 30 0x1 0xff00>,
<&raid_mbox 31 0x1 0xff00>;
};
};
/*
* BSD LICENSE
*
* Copyright(c) 2016-2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
sata {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
sata0: ahci@00210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_port0: sata-port@0 {
reg = <0>;
phys = <&sata0_phy0>;
phy-names = "sata-phy";
};
};
sata_phy0: sata_phy@00212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata1: ahci@00310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_port0: sata-port@0 {
reg = <0>;
phys = <&sata1_phy0>;
phy-names = "sata-phy";
};
};
sata_phy1: sata_phy@00312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata2: ahci@00120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_port0: sata-port@0 {
reg = <0>;
phys = <&sata2_phy0>;
phy-names = "sata-phy";
};
};
sata_phy2: sata_phy@00122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata3: ahci@00130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_port0: sata-port@0 {
reg = <0>;
phys = <&sata3_phy0>;
phy-names = "sata-phy";
};
};
sata_phy3: sata_phy@00132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata4: ahci@00330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_port0: sata-port@0 {
reg = <0>;
phys = <&sata4_phy0>;
phy-names = "sata-phy";
};
};
sata_phy4: sata_phy@00332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata5: ahci@00400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_port0: sata-port@0 {
reg = <0>;
phys = <&sata5_phy0>;
phy-names = "sata-phy";
};
};
sata_phy5: sata_phy@00402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata6: ahci@00410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_port0: sata-port@0 {
reg = <0>;
phys = <&sata6_phy0>;
phy-names = "sata-phy";
};
};
sata_phy6: sata_phy@00412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata7: ahci@00420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_port0: sata-port@0 {
reg = <0>;
phys = <&sata7_phy0>;
phy-names = "sata-phy";
};
};
sata_phy7: sata_phy@00422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
};
...@@ -152,6 +152,12 @@ scr { ...@@ -152,6 +152,12 @@ scr {
#size-cells = <1>; #size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>; ranges = <0x0 0x0 0x61000000 0x05000000>;
ccn: ccn@00000000 {
compatible = "arm,ccn-502";
reg = <0x00000000 0x900000>;
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller@02c00000 { gic: interrupt-controller@02c00000 {
compatible = "arm,gic-v3"; compatible = "arm,gic-v3";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -261,6 +267,9 @@ gpio_crmu: gpio@00024800 { ...@@ -261,6 +267,9 @@ gpio_crmu: gpio@00024800 {
}; };
}; };
#include "stingray-fs4.dtsi"
#include "stingray-sata.dtsi"
hsls { hsls {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
...@@ -269,6 +278,37 @@ hsls { ...@@ -269,6 +278,37 @@ hsls {
#include "stingray-pinctrl.dtsi" #include "stingray-pinctrl.dtsi"
mdio_mux_iproc: mdio-mux@0002023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* PCIe serdes */
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@2 { /* SATA */
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@3 { /* USB */
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@10 { /* RGMII */
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
};
pwm: pwm@00010000 { pwm: pwm@00010000 {
compatible = "brcm,iproc-pwm"; compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>; reg = <0x00010000 0x1000>;
...@@ -277,6 +317,93 @@ pwm: pwm@00010000 { ...@@ -277,6 +317,93 @@ pwm: pwm@00010000 {
status = "disabled"; status = "disabled";
}; };
timer0: timer@00030000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer1: timer@00040000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00040000 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer2: timer@00050000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00050000 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer3: timer@00060000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00060000 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer4: timer@00070000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00070000 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer5: timer@00080000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00080000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer6: timer@00090000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00090000 0x1000>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer7: timer@000a0000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x000a0000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
i2c0: i2c@000b0000 { i2c0: i2c@000b0000 {
compatible = "brcm,iproc-i2c"; compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>; reg = <0x000b0000 0x100>;
...@@ -424,6 +551,15 @@ dma0: dma@00310000 { ...@@ -424,6 +551,15 @@ dma0: dma@00310000 {
iommus = <&smmu 0x6000 0x0000>; iommus = <&smmu 0x6000 0x0000>;
}; };
enet: ethernet@00340000{
compatible = "brcm,amac";
reg = <0x00340000 0x1000>;
reg-names = "amac_base";
dma-coherent;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
status= "disabled";
};
nand: nand@00360000 { nand: nand@00360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>, reg = <0x00360000 0x600>,
......
...@@ -310,20 +310,6 @@ &dsi { ...@@ -310,20 +310,6 @@ &dsi {
samsung,pll-clock-frequency = <24000000>; samsung,pll-clock-frequency = <24000000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&te_irq>; pinctrl-0 = <&te_irq>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
samsung,burst-clock-frequency = <512000000>;
samsung,esc-clock-frequency = <16000000>;
};
};
};
}; };
&hdmi { &hdmi {
...@@ -846,7 +832,6 @@ &i2s0 { ...@@ -846,7 +832,6 @@ &i2s0 {
&mshc_0 { &mshc_0 {
status = "okay"; status = "okay";
num-slots = <1>;
mmc-hs200-1_8v; mmc-hs200-1_8v;
mmc-hs400-1_8v; mmc-hs400-1_8v;
cap-mmc-highspeed; cap-mmc-highspeed;
...@@ -868,7 +853,6 @@ &mshc_0 { ...@@ -868,7 +853,6 @@ &mshc_0 {
&mshc_2 { &mshc_2 {
status = "okay"; status = "okay";
num-slots = <1>;
cap-sd-highspeed; cap-sd-highspeed;
disable-wp; disable-wp;
cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
...@@ -1216,8 +1200,9 @@ &usbdrd30 { ...@@ -1216,8 +1200,9 @@ &usbdrd30 {
status = "okay"; status = "okay";
}; };
&usbdrd_dwc3_0 { &usbdrd_dwc3 {
dr_mode = "otg"; dr_mode = "otg";
extcon = <&muic>;
}; };
&usbdrd30_phy { &usbdrd30_phy {
......
...@@ -1367,7 +1367,7 @@ usbdrd30: usbdrd { ...@@ -1367,7 +1367,7 @@ usbdrd30: usbdrd {
ranges; ranges;
status = "disabled"; status = "disabled";
dwc3@15400000 { usbdrd_dwc3: dwc3@15400000 {
compatible = "snps,dwc3"; compatible = "snps,dwc3";
reg = <0x15400000 0x10000>; reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
...@@ -1414,7 +1414,7 @@ usbhost30: usbhost { ...@@ -1414,7 +1414,7 @@ usbhost30: usbhost {
ranges; ranges;
status = "disabled"; status = "disabled";
usbdrd_dwc3_0: dwc3@15a00000 { usbhost_dwc3: dwc3@15a00000 {
compatible = "snps,dwc3"; compatible = "snps,dwc3";
reg = <0x15a00000 0x10000>; reg = <0x15a00000 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
......
...@@ -359,7 +359,6 @@ pmic_irq: pmic-irq { ...@@ -359,7 +359,6 @@ pmic_irq: pmic-irq {
&mmc_0 { &mmc_0 {
status = "okay"; status = "okay";
num-slots = <1>;
cap-mmc-highspeed; cap-mmc-highspeed;
mmc-hs200-1_8v; mmc-hs200-1_8v;
non-removable; non-removable;
...@@ -375,7 +374,6 @@ &mmc_0 { ...@@ -375,7 +374,6 @@ &mmc_0 {
&mmc_2 { &mmc_2 {
status = "okay"; status = "okay";
num-slots = <1>;
cap-sd-highspeed; cap-sd-highspeed;
card-detect-delay = <200>; card-detect-delay = <200>;
clock-frequency = <400000000>; clock-frequency = <400000000>;
......
...@@ -444,6 +444,15 @@ edma0: edma@2c00000 { ...@@ -444,6 +444,15 @@ edma0: edma@2c00000 {
<&clockgen 4 3>; <&clockgen 4 3>;
}; };
usb0: usb3@2f00000 {
compatible = "snps,dwc3";
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <0 60 0x4>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 { sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci"; compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>, reg = <0x0 0x3200000 0x0 0x10000>,
...@@ -454,5 +463,13 @@ sata: sata@3200000 { ...@@ -454,5 +463,13 @@ sata: sata@3200000 {
dma-coherent; dma-coherent;
status = "disabled"; status = "disabled";
}; };
usb1: usb2@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <0 139 0x4>;
dr_mode = "host";
phy_type = "ulpi";
};
}; };
}; };
...@@ -49,7 +49,7 @@ ...@@ -49,7 +49,7 @@
#include "fsl-ls1088a.dtsi" #include "fsl-ls1088a.dtsi"
/ { / {
model = "L1088A RDB Board"; model = "LS1088A RDB Board";
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
}; };
......
...@@ -52,6 +52,10 @@ / { ...@@ -52,6 +52,10 @@ / {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
aliases {
crypto = &crypto;
};
cpus { cpus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -62,6 +66,7 @@ cpu0: cpu@0 { ...@@ -62,6 +66,7 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x0>; reg = <0x0>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -70,6 +75,7 @@ cpu1: cpu@1 { ...@@ -70,6 +75,7 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x1>; reg = <0x1>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PH20>;
}; };
cpu2: cpu@2 { cpu2: cpu@2 {
...@@ -77,6 +83,7 @@ cpu2: cpu@2 { ...@@ -77,6 +83,7 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x2>; reg = <0x2>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PH20>;
}; };
cpu3: cpu@3 { cpu3: cpu@3 {
...@@ -84,6 +91,7 @@ cpu3: cpu@3 { ...@@ -84,6 +91,7 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x3>; reg = <0x3>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PH20>;
}; };
cpu4: cpu@100 { cpu4: cpu@100 {
...@@ -91,6 +99,7 @@ cpu4: cpu@100 { ...@@ -91,6 +99,7 @@ cpu4: cpu@100 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x100>; reg = <0x100>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -99,6 +108,7 @@ cpu5: cpu@101 { ...@@ -99,6 +108,7 @@ cpu5: cpu@101 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x101>; reg = <0x101>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PH20>;
}; };
cpu6: cpu@102 { cpu6: cpu@102 {
...@@ -106,6 +116,7 @@ cpu6: cpu@102 { ...@@ -106,6 +116,7 @@ cpu6: cpu@102 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x102>; reg = <0x102>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PH20>;
}; };
cpu7: cpu@103 { cpu7: cpu@103 {
...@@ -113,6 +124,16 @@ cpu7: cpu@103 { ...@@ -113,6 +124,16 @@ cpu7: cpu@103 {
compatible = "arm,cortex-a53"; compatible = "arm,cortex-a53";
reg = <0x103>; reg = <0x103>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PH20>;
};
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
arm,psci-suspend-param = <0x00010000>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
}; };
}; };
...@@ -136,6 +157,11 @@ timer { ...@@ -136,6 +157,11 @@ timer {
<1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
}; };
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
sysclk: sysclk { sysclk: sysclk {
compatible = "fixed-clock"; compatible = "fixed-clock";
#clock-cells = <0>; #clock-cells = <0>;
...@@ -369,6 +395,45 @@ sata: sata@3200000 { ...@@ -369,6 +395,45 @@ sata: sata@3200000 {
dma-coherent; dma-coherent;
status = "disabled"; status = "disabled";
}; };
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x8000000 0x100000>;
reg = <0x00 0x8000000 0x0 0x100000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
}; };
}; };
...@@ -55,11 +55,6 @@ / { ...@@ -55,11 +55,6 @@ / {
model = "Freescale Layerscape 2080a QDS Board"; model = "Freescale Layerscape 2080a QDS Board";
compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
......
...@@ -55,11 +55,6 @@ / { ...@@ -55,11 +55,6 @@ / {
model = "Freescale Layerscape 2080a RDB Board"; model = "Freescale Layerscape 2080a RDB Board";
compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen { chosen {
stdout-path = "serial1:115200n8"; stdout-path = "serial1:115200n8";
}; };
......
...@@ -52,11 +52,6 @@ / { ...@@ -52,11 +52,6 @@ / {
model = "Freescale Layerscape 2080a software Simulator model"; model = "Freescale Layerscape 2080a software Simulator model";
compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
ethernet@2210000 { ethernet@2210000 {
compatible = "smsc,lan91c111"; compatible = "smsc,lan91c111";
reg = <0x0 0x2210000 0x0 0x100>; reg = <0x0 0x2210000 0x0 0x100>;
......
...@@ -53,6 +53,7 @@ cpu0: cpu@0 { ...@@ -53,6 +53,7 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x0>; reg = <0x0>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>; next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -62,6 +63,7 @@ cpu1: cpu@1 { ...@@ -62,6 +63,7 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x1>; reg = <0x1>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>; next-level-cache = <&cluster0_l2>;
}; };
...@@ -70,6 +72,7 @@ cpu2: cpu@100 { ...@@ -70,6 +72,7 @@ cpu2: cpu@100 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x100>; reg = <0x100>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>; next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -79,6 +82,7 @@ cpu3: cpu@101 { ...@@ -79,6 +82,7 @@ cpu3: cpu@101 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x101>; reg = <0x101>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>; next-level-cache = <&cluster1_l2>;
}; };
...@@ -87,6 +91,7 @@ cpu4: cpu@200 { ...@@ -87,6 +91,7 @@ cpu4: cpu@200 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x200>; reg = <0x200>;
clocks = <&clockgen 1 2>; clocks = <&clockgen 1 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>; next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -96,6 +101,7 @@ cpu5: cpu@201 { ...@@ -96,6 +101,7 @@ cpu5: cpu@201 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x201>; reg = <0x201>;
clocks = <&clockgen 1 2>; clocks = <&clockgen 1 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>; next-level-cache = <&cluster2_l2>;
}; };
...@@ -105,6 +111,7 @@ cpu6: cpu@300 { ...@@ -105,6 +111,7 @@ cpu6: cpu@300 {
reg = <0x300>; reg = <0x300>;
clocks = <&clockgen 1 3>; clocks = <&clockgen 1 3>;
next-level-cache = <&cluster3_l2>; next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -113,6 +120,7 @@ cpu7: cpu@301 { ...@@ -113,6 +120,7 @@ cpu7: cpu@301 {
compatible = "arm,cortex-a57"; compatible = "arm,cortex-a57";
reg = <0x301>; reg = <0x301>;
clocks = <&clockgen 1 3>; clocks = <&clockgen 1 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>; next-level-cache = <&cluster3_l2>;
}; };
...@@ -131,6 +139,15 @@ cluster2_l2: l2-cache2 { ...@@ -131,6 +139,15 @@ cluster2_l2: l2-cache2 {
cluster3_l2: l2-cache3 { cluster3_l2: l2-cache3 {
compatible = "cache"; compatible = "cache";
}; };
CPU_PW20: cpu-pw20 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
arm,psci-suspend-param = <0x00010000>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
};
}; };
&pcie1 { &pcie1 {
......
...@@ -54,11 +54,6 @@ / { ...@@ -54,11 +54,6 @@ / {
model = "Freescale Layerscape 2088A QDS Board"; model = "Freescale Layerscape 2088A QDS Board";
compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
......
...@@ -54,11 +54,6 @@ / { ...@@ -54,11 +54,6 @@ / {
model = "Freescale Layerscape 2088A RDB Board"; model = "Freescale Layerscape 2088A RDB Board";
compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
chosen { chosen {
stdout-path = "serial1:115200n8"; stdout-path = "serial1:115200n8";
}; };
......
...@@ -53,6 +53,7 @@ cpu0: cpu@0 { ...@@ -53,6 +53,7 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x0>; reg = <0x0>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>; next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -62,6 +63,7 @@ cpu1: cpu@1 { ...@@ -62,6 +63,7 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x1>; reg = <0x1>;
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>; next-level-cache = <&cluster0_l2>;
}; };
...@@ -70,6 +72,7 @@ cpu2: cpu@100 { ...@@ -70,6 +72,7 @@ cpu2: cpu@100 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x100>; reg = <0x100>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>; next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -79,6 +82,7 @@ cpu3: cpu@101 { ...@@ -79,6 +82,7 @@ cpu3: cpu@101 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x101>; reg = <0x101>;
clocks = <&clockgen 1 1>; clocks = <&clockgen 1 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>; next-level-cache = <&cluster1_l2>;
}; };
...@@ -88,6 +92,7 @@ cpu4: cpu@200 { ...@@ -88,6 +92,7 @@ cpu4: cpu@200 {
reg = <0x200>; reg = <0x200>;
clocks = <&clockgen 1 2>; clocks = <&clockgen 1 2>;
next-level-cache = <&cluster2_l2>; next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -96,6 +101,7 @@ cpu5: cpu@201 { ...@@ -96,6 +101,7 @@ cpu5: cpu@201 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x201>; reg = <0x201>;
clocks = <&clockgen 1 2>; clocks = <&clockgen 1 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>; next-level-cache = <&cluster2_l2>;
}; };
...@@ -104,6 +110,7 @@ cpu6: cpu@300 { ...@@ -104,6 +110,7 @@ cpu6: cpu@300 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x300>; reg = <0x300>;
clocks = <&clockgen 1 3>; clocks = <&clockgen 1 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>; next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
...@@ -113,6 +120,7 @@ cpu7: cpu@301 { ...@@ -113,6 +120,7 @@ cpu7: cpu@301 {
compatible = "arm,cortex-a72"; compatible = "arm,cortex-a72";
reg = <0x301>; reg = <0x301>;
clocks = <&clockgen 1 3>; clocks = <&clockgen 1 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>; next-level-cache = <&cluster3_l2>;
}; };
...@@ -131,6 +139,15 @@ cluster2_l2: l2-cache2 { ...@@ -131,6 +139,15 @@ cluster2_l2: l2-cache2 {
cluster3_l2: l2-cache3 { cluster3_l2: l2-cache3 {
compatible = "cache"; compatible = "cache";
}; };
CPU_PW20: cpu-pw20 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
arm,psci-suspend-param = <0x00010000>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
};
}; };
&pcie1 { &pcie1 {
......
...@@ -46,6 +46,7 @@ ...@@ -46,6 +46,7 @@
*/ */
#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ { / {
compatible = "fsl,ls2080a"; compatible = "fsl,ls2080a";
...@@ -53,6 +54,12 @@ / { ...@@ -53,6 +54,12 @@ / {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
aliases {
crypto = &crypto;
serial0 = &serial0;
serial1 = &serial1;
};
cpu: cpus { cpu: cpus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -118,6 +125,11 @@ pmu { ...@@ -118,6 +125,11 @@ pmu {
interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
}; };
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
soc { soc {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <2>; #address-cells = <2>;
...@@ -301,6 +313,45 @@ cluster4_core1_watchdog: wdt@c310000 { ...@@ -301,6 +313,45 @@ cluster4_core1_watchdog: wdt@c310000 {
clock-names = "apb_pclk", "wdog_clk"; clock-names = "apb_pclk", "wdog_clk";
}; };
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x8000000 0x100000>;
reg = <0x00 0x8000000 0x0 0x100000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
fsl_mc: fsl-mc@80c000000 { fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc"; compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
......
...@@ -39,6 +39,34 @@ memory@0 { ...@@ -39,6 +39,34 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>; reg = <0x0 0x0 0x0 0x0>;
}; };
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ramoops@32000000 {
compatible = "ramoops";
reg = <0x0 0x32000000 0x0 0x00100000>;
record-size = <0x00020000>;
console-size = <0x00020000>;
ftrace-size = <0x00020000>;
};
};
reboot-mode-syscon@32100000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x32100000 0x0 0x00001000>;
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x0>;
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
};
};
keys { keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -159,6 +187,13 @@ wlan_en: wlan-en-1-8v { ...@@ -159,6 +187,13 @@ wlan_en: wlan-en-1-8v {
startup-delay-us = <70000>; startup-delay-us = <70000>;
enable-active-high; enable-active-high;
}; };
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
}; };
&i2c0 { &i2c0 {
...@@ -195,7 +230,7 @@ &uart4 { ...@@ -195,7 +230,7 @@ &uart4 {
bluetooth { bluetooth {
compatible = "ti,wl1837-st"; compatible = "ti,wl1837-st";
enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
max-speed = <921600>; max-speed = <3000000>;
}; };
}; };
......
...@@ -58,6 +58,8 @@ cpu0: cpu@0 { ...@@ -58,6 +58,8 @@ cpu0: cpu@0 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x0>; reg = <0x0 0x0>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
...@@ -65,6 +67,8 @@ cpu1: cpu@1 { ...@@ -65,6 +67,8 @@ cpu1: cpu@1 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x1>; reg = <0x0 0x1>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
}; };
cpu2: cpu@2 { cpu2: cpu@2 {
...@@ -72,6 +76,8 @@ cpu2: cpu@2 { ...@@ -72,6 +76,8 @@ cpu2: cpu@2 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x2>; reg = <0x0 0x2>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
}; };
cpu3: cpu@3 { cpu3: cpu@3 {
...@@ -79,6 +85,8 @@ cpu3: cpu@3 { ...@@ -79,6 +85,8 @@ cpu3: cpu@3 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x3>; reg = <0x0 0x3>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
}; };
cpu4: cpu@100 { cpu4: cpu@100 {
...@@ -86,6 +94,12 @@ cpu4: cpu@100 { ...@@ -86,6 +94,12 @@ cpu4: cpu@100 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x100>; reg = <0x0 0x100>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A73_L2>;
cpu-idle-states = <
&CPU_NAP
&CPU_SLEEP
&CLUSTER_SLEEP_1
>;
}; };
cpu5: cpu@101 { cpu5: cpu@101 {
...@@ -93,6 +107,12 @@ cpu5: cpu@101 { ...@@ -93,6 +107,12 @@ cpu5: cpu@101 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x101>; reg = <0x0 0x101>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A73_L2>;
cpu-idle-states = <
&CPU_NAP
&CPU_SLEEP
&CLUSTER_SLEEP_1
>;
}; };
cpu6: cpu@102 { cpu6: cpu@102 {
...@@ -100,6 +120,12 @@ cpu6: cpu@102 { ...@@ -100,6 +120,12 @@ cpu6: cpu@102 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x102>; reg = <0x0 0x102>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A73_L2>;
cpu-idle-states = <
&CPU_NAP
&CPU_SLEEP
&CLUSTER_SLEEP_1
>;
}; };
cpu7: cpu@103 { cpu7: cpu@103 {
...@@ -107,6 +133,59 @@ cpu7: cpu@103 { ...@@ -107,6 +133,59 @@ cpu7: cpu@103 {
device_type = "cpu"; device_type = "cpu";
reg = <0x0 0x103>; reg = <0x0 0x103>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&A73_L2>;
cpu-idle-states = <
&CPU_NAP
&CPU_SLEEP
&CLUSTER_SLEEP_1
>;
};
idle-states {
entry-method = "psci";
CPU_NAP: cpu-nap {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0000001>;
entry-latency-us = <7>;
exit-latency-us = <2>;
min-residency-us = <15>;
};
CPU_SLEEP: cpu-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <40>;
exit-latency-us = <70>;
min-residency-us = <3000>;
};
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <500>;
exit-latency-us = <5000>;
min-residency-us = <20000>;
};
CLUSTER_SLEEP_1: cluster-sleep-1 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <1000>;
exit-latency-us = <5000>;
min-residency-us = <20000>;
};
};
A53_L2: l2-cache0 {
compatible = "cache";
};
A73_L2: l2-cache1 {
compatible = "cache";
}; };
}; };
...@@ -123,6 +202,26 @@ gic: interrupt-controller@e82b0000 { ...@@ -123,6 +202,26 @@ gic: interrupt-controller@e82b0000 {
IRQ_TYPE_LEVEL_HIGH)>; IRQ_TYPE_LEVEL_HIGH)>;
}; };
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>,
<&cpu4>,
<&cpu5>,
<&cpu6>,
<&cpu7>;
};
timer { timer {
compatible = "arm,armv8-timer"; compatible = "arm,armv8-timer";
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
...@@ -337,6 +436,19 @@ uart6: serial@fff32000 { ...@@ -337,6 +436,19 @@ uart6: serial@fff32000 {
status = "disabled"; status = "disabled";
}; };
dma0: dma@fdf30000 {
compatible = "hisilicon,k3-dma-1.0";
reg = <0x0 0xfdf30000 0x0 0x1000>;
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <32>;
dma-min-chan = <1>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
dma-no-cci;
dma-type = "hi3660_dma";
};
rtc0: rtc@fff04000 { rtc0: rtc@fff04000 {
compatible = "arm,pl031", "arm,primecell"; compatible = "arm,pl031", "arm,primecell";
reg = <0x0 0Xfff04000 0x0 0x1000>; reg = <0x0 0Xfff04000 0x0 0x1000>;
...@@ -810,6 +922,7 @@ dwmmc1: dwmmc1@ff37f000 { ...@@ -810,6 +922,7 @@ dwmmc1: dwmmc1@ff37f000 {
clock-names = "ciu", "biu"; clock-names = "ciu", "biu";
clock-frequency = <3200000>; clock-frequency = <3200000>;
resets = <&crg_rst 0x94 18>; resets = <&crg_rst 0x94 18>;
reset-names = "reset";
cd-gpios = <&gpio25 3 0>; cd-gpios = <&gpio25 3 0>;
hisilicon,peripheral-syscon = <&sctrl>; hisilicon,peripheral-syscon = <&sctrl>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -839,6 +952,7 @@ dwmmc2: dwmmc2@ff3ff000 { ...@@ -839,6 +952,7 @@ dwmmc2: dwmmc2@ff3ff000 {
<&crg_ctrl HI3660_HCLK_GATE_SDIO0>; <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
clock-names = "ciu", "biu"; clock-names = "ciu", "biu";
resets = <&crg_rst 0x94 20>; resets = <&crg_rst 0x94 20>;
reset-names = "reset";
card-detect-delay = <200>; card-detect-delay = <200>;
supports-highspeed; supports-highspeed;
keep-power-in-suspend; keep-power-in-suspend;
...@@ -848,5 +962,21 @@ &sdio_clk_cfg_func ...@@ -848,5 +962,21 @@ &sdio_clk_cfg_func
&sdio_cfg_func>; &sdio_cfg_func>;
status = "disabled"; status = "disabled";
}; };
watchdog0: watchdog@e8a06000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;
clock-names = "apb_pclk";
};
watchdog1: watchdog@e8a07000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;
clock-names = "apb_pclk";
};
}; };
}; };
...@@ -262,6 +262,12 @@ pm_ctrl: pm_ctrl@f7032000 { ...@@ -262,6 +262,12 @@ pm_ctrl: pm_ctrl@f7032000 {
#clock-cells = <1>; #clock-cells = <1>;
}; };
acpu_sctrl: acpu_sctrl@f6504000 {
compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
reg = <0x0 0xf6504000 0x0 0x1000>;
#clock-cells = <1>;
};
medianoc_ade: medianoc_ade@f4520000 { medianoc_ade: medianoc_ade@f4520000 {
compatible = "syscon"; compatible = "syscon";
reg = <0x0 0xf4520000 0x0 0x4000>; reg = <0x0 0xf4520000 0x0 0x4000>;
...@@ -755,7 +761,8 @@ usb: usb@f72c0000 { ...@@ -755,7 +761,8 @@ usb: usb@f72c0000 {
dr_mode = "otg"; dr_mode = "otg";
g-rx-fifo-size = <512>; g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <128>; g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 128 128 128 128>; g-tx-fifo-size = <128 128 128 128 128 128 128 128
16 16 16 16 16 16 16>;
interrupts = <0 77 0x4>; interrupts = <0 77 0x4>;
}; };
......
...@@ -84,3 +84,7 @@ &eth3 { ...@@ -84,3 +84,7 @@ &eth3 {
&sas1 { &sas1 {
status = "ok"; status = "ok";
}; };
&p0_pcie2_a {
status = "ok";
};
...@@ -1534,5 +1534,27 @@ sas2: sas@a3000000 { ...@@ -1534,5 +1534,27 @@ sas2: sas@a3000000 {
<637 1>,<638 1>,<639 1>; <637 1>,<638 1>,<639 1>;
status = "disabled"; status = "disabled";
}; };
p0_pcie2_a: pcie@a00a0000 {
compatible = "hisilicon,hip07-pcie-ecam";
reg = <0 0xaf800000 0 0x800000>,
<0 0xa00a0000 0 0x10000>;
bus-range = <0xf8 0xff>;
msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>;
msi-map-mask = <0xffff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
dma-coherent;
ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000
0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
0x0 0 0 2 &mbigen_pcie2_a 671 4
0x0 0 0 3 &mbigen_pcie2_a 671 4
0x0 0 0 4 &mbigen_pcie2_a 671 4>;
status = "disabled";
};
}; };
}; };
...@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb ...@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
......
...@@ -45,6 +45,7 @@ ...@@ -45,6 +45,7 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi" #include "armada-372x.dtsi"
/ { / {
...@@ -59,6 +60,20 @@ memory@0 { ...@@ -59,6 +60,20 @@ memory@0 {
device_type = "memory"; device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>; reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
}; };
vcc_sd_reg1: regulator {
compatible = "regulator-gpio";
regulator-name = "vcc_sd1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <1800000 0x1
3300000 0x0>;
enable-active-high;
};
}; };
/* J9 */ /* J9 */
...@@ -71,6 +86,16 @@ &sata { ...@@ -71,6 +86,16 @@ &sata {
status = "okay"; status = "okay";
}; };
/* J1 */
&sdhci1 {
wp-inverted;
bus-width = <4>;
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
status = "okay";
};
/* Exported on the micro USB connector J5 through an FTDI */ /* Exported on the micro USB connector J5 through an FTDI */
&uart0 { &uart0 {
status = "okay"; status = "okay";
...@@ -81,6 +106,11 @@ &usb3 { ...@@ -81,6 +106,11 @@ &usb3 {
status = "okay"; status = "okay";
}; };
/* J8 */
&usb2 {
status = "okay";
};
&mdio { &mdio {
switch0: switch0@1 { switch0: switch0@1 {
compatible = "marvell,mv88e6085"; compatible = "marvell,mv88e6085";
......
...@@ -81,6 +81,11 @@ timer { ...@@ -81,6 +81,11 @@ timer {
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
}; };
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
soc { soc {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <2>; #address-cells = <2>;
...@@ -322,7 +327,11 @@ gic: interrupt-controller@1d00000 { ...@@ -322,7 +327,11 @@ gic: interrupt-controller@1d00000 {
#interrupt-cells = <3>; #interrupt-cells = <3>;
interrupt-controller; interrupt-controller;
reg = <0x1d00000 0x10000>, /* GICD */ reg = <0x1d00000 0x10000>, /* GICD */
<0x1d40000 0x40000>; /* GICR */ <0x1d40000 0x40000>, /* GICR */
<0x1d80000 0x2000>, /* GICC */
<0x1d90000 0x2000>, /* GICH */
<0x1da0000 0x20000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
}; };
}; };
......
...@@ -44,6 +44,7 @@ ...@@ -44,6 +44,7 @@
* Device Tree file for Marvell Armada 7040 Development board platform * Device Tree file for Marvell Armada 7040 Development board platform
*/ */
#include <dt-bindings/gpio/gpio.h>
#include "armada-7040.dtsi" #include "armada-7040.dtsi"
/ { / {
...@@ -59,6 +60,34 @@ memory@00000000 { ...@@ -59,6 +60,34 @@ memory@00000000 {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>; reg = <0x0 0x0 0x0 0x80000000>;
}; };
cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
cpm_usb3_0_phy: cpm-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_0_vbus>;
};
cpm_usb3_1_phy: cpm-usb3-1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_1_vbus>;
};
}; };
&i2c0 { &i2c0 {
...@@ -105,6 +134,14 @@ &cpm_pcie2 { ...@@ -105,6 +134,14 @@ &cpm_pcie2 {
&cpm_i2c0 { &cpm_i2c0 {
status = "okay"; status = "okay";
clock-frequency = <100000>; clock-frequency = <100000>;
expander0: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
};
}; };
&cpm_spi1 { &cpm_spi1 {
...@@ -140,10 +177,12 @@ &cpm_sata0 { ...@@ -140,10 +177,12 @@ &cpm_sata0 {
}; };
&cpm_usb3_0 { &cpm_usb3_0 {
usb-phy = <&cpm_usb3_0_phy>;
status = "okay"; status = "okay";
}; };
&cpm_usb3_1 { &cpm_usb3_1 {
usb-phy = <&cpm_usb3_1_phy>;
status = "okay"; status = "okay";
}; };
......
...@@ -44,6 +44,7 @@ ...@@ -44,6 +44,7 @@
* Device Tree file for Marvell Armada 8040 Development board platform * Device Tree file for Marvell Armada 8040 Development board platform
*/ */
#include <dt-bindings/gpio/gpio.h>
#include "armada-8040.dtsi" #include "armada-8040.dtsi"
/ { / {
...@@ -59,6 +60,48 @@ memory@00000000 { ...@@ -59,6 +60,48 @@ memory@00000000 {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>; reg = <0x0 0x0 0x0 0x80000000>;
}; };
cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cpm-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "cpm-usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
cpm_usb3_0_phy: cpm-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_0_vbus>;
};
cpm_usb3_1_phy: cpm-usb3-1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_1_vbus>;
};
cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cps-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
};
cps_usb3_0_phy: cps-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cps_reg_usb3_0_vbus>;
};
}; };
&i2c0 { &i2c0 {
...@@ -107,6 +150,25 @@ &cpm_pcie2 { ...@@ -107,6 +150,25 @@ &cpm_pcie2 {
&cpm_i2c0 { &cpm_i2c0 {
status = "okay"; status = "okay";
clock-frequency = <100000>; clock-frequency = <100000>;
/* U31 */
expander0: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
};
/* U25 */
expander1: pca9555@25 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x25>;
};
}; };
/* CON4 on CP0 expansion */ /* CON4 on CP0 expansion */
...@@ -116,11 +178,13 @@ &cpm_sata0 { ...@@ -116,11 +178,13 @@ &cpm_sata0 {
/* CON9 on CP0 expansion */ /* CON9 on CP0 expansion */
&cpm_usb3_0 { &cpm_usb3_0 {
usb-phy = <&cpm_usb3_0_phy>;
status = "okay"; status = "okay";
}; };
/* CON10 on CP0 expansion */ /* CON10 on CP0 expansion */
&cpm_usb3_1 { &cpm_usb3_1 {
usb-phy = <&cpm_usb3_1_phy>;
status = "okay"; status = "okay";
}; };
...@@ -159,6 +223,7 @@ &cps_sata0 { ...@@ -159,6 +223,7 @@ &cps_sata0 {
/* CON9 on CP1 expansion */ /* CON9 on CP1 expansion */
&cps_usb3_0 { &cps_usb3_0 {
usb-phy = <&cps_usb3_0_phy>;
status = "okay"; status = "okay";
}; };
......
...@@ -46,11 +46,17 @@ ...@@ -46,11 +46,17 @@
#include "armada-8040.dtsi" #include "armada-8040.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Marvell 8040 MACHIATOBin"; model = "Marvell 8040 MACHIATOBin";
compatible = "marvell,armada8040-mcbin", "marvell,armada8040", compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806"; "marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
memory@00000000 { memory@00000000 {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>; reg = <0x0 0x0 0x0 0x80000000>;
...@@ -77,11 +83,13 @@ v_vddo_h: regulator-1-8v { ...@@ -77,11 +83,13 @@ v_vddo_h: regulator-1-8v {
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high;
gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cpm_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus"; regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>; regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
/* actually GPIO controlled, but 8k has no GPIO support yet */
regulator-always-on;
status = "okay"; status = "okay";
}; };
...@@ -112,10 +120,44 @@ &ap_sdhci0 { ...@@ -112,10 +120,44 @@ &ap_sdhci0 {
&cpm_i2c0 { &cpm_i2c0 {
clock-frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cpm_i2c0_pins>;
status = "okay"; status = "okay";
}; };
&cpm_i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cpm_i2c1_pins>;
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
sfpp0_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
sfpp1_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
sfp_1g_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
};
};
&cpm_mdio { &cpm_mdio {
pinctrl-names = "default";
pinctrl-0 = <&cpm_ge_mdio_pins>;
status = "okay"; status = "okay";
ge_phy: ethernet-phy@0 { ge_phy: ethernet-phy@0 {
...@@ -123,6 +165,67 @@ ge_phy: ethernet-phy@0 { ...@@ -123,6 +165,67 @@ ge_phy: ethernet-phy@0 {
}; };
}; };
&cpm_pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&cpm_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
&cpm_pinctrl {
cpm_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
cpm_i2c1_pins: i2c1-pins {
marvell,pins = "mpp35", "mpp36";
marvell,function = "i2c1";
};
cpm_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
cpm_xhci_vbus_pins: xhci0-vbus-pins {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
cpm_pcie_pins: pcie-pins {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
marvell,function = "sdio";
};
};
&cpm_xmdio {
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
};
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <8>;
};
};
&cpm_ethernet {
status = "okay";
};
&cpm_eth0 {
status = "okay";
phy = <&phy0>;
phy-mode = "10gbase-kr";
};
&cpm_sata0 { &cpm_sata0 {
/* CPM Lane 0 - U29 */ /* CPM Lane 0 - U29 */
status = "okay"; status = "okay";
...@@ -132,6 +235,8 @@ &cpm_sdhci0 { ...@@ -132,6 +235,8 @@ &cpm_sdhci0 {
/* U6 */ /* U6 */
broken-cd; broken-cd;
bus-width = <4>; bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cpm_sdhci_pins>;
status = "okay"; status = "okay";
vqmmc-supply = <&v_3_3>; vqmmc-supply = <&v_3_3>;
}; };
...@@ -150,6 +255,12 @@ &cps_ethernet { ...@@ -150,6 +255,12 @@ &cps_ethernet {
status = "okay"; status = "okay";
}; };
&cps_eth0 {
status = "okay";
phy = <&phy8>;
phy-mode = "10gbase-kr";
};
&cps_eth1 { &cps_eth1 {
/* CPS Lane 0 - J5 (Gigabit RJ45) */ /* CPS Lane 0 - J5 (Gigabit RJ45) */
status = "okay"; status = "okay";
...@@ -157,6 +268,13 @@ &cps_eth1 { ...@@ -157,6 +268,13 @@ &cps_eth1 {
phy-mode = "sgmii"; phy-mode = "sgmii";
}; };
&cps_pinctrl {
cps_spi1_pins: spi1-pins {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
};
&cps_sata0 { &cps_sata0 {
/* CPS Lane 1 - U32 */ /* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */ /* CPS Lane 3 - U31 */
...@@ -164,6 +282,8 @@ &cps_sata0 { ...@@ -164,6 +282,8 @@ &cps_sata0 {
}; };
&cps_spi1 { &cps_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cps_spi1_pins>;
status = "okay"; status = "okay";
spi-flash@0 { spi-flash@0 {
......
/*
* Copyright (C) 2017 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada-8080 Development board platform
*/
#include "armada-8080.dtsi"
/ {
model = "Marvell 8080 board";
compatible = "marvell,armada-8080-db", "marvell,armada-8080",
"marvell,armada-ap810-octa", "marvell,armada-ap810";
chosen {
stdout-path = "serial0:115200n8";
};
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
&uart0_ap0 {
clock-frequency = <384000>;
status = "okay";
};
/*
* Copyright (C) 2017 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
*/
#include "armada-ap810-ap0-octa-core.dtsi"
/ {
model = "Marvell 8080 board";
compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
"marvell,armada-ap810";
};
/*
* Copyright (C) 2017 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada AP810 OCTA cores.
*/
#include "armada-ap810-ap0.dtsi"
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
cpu@000 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
cpu@001 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
};
cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
};
cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x200>;
enable-method = "psci";
};
cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x201>;
enable-method = "psci";
};
cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x300>;
enable-method = "psci";
};
cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x301>;
enable-method = "psci";
};
};
};
/*
* Copyright (C) 2017 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada AP810.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/dts-v1/;
/ {
model = "Marvell Armada AP810";
compatible = "marvell,armada-ap810";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0_ap0;
serial1 = &uart1_ap0;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
ap810-ap0 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
config-space@e8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 0xe8000000 0x4000000>;
interrupt-parent = <&gic>;
gic: interrupt-controller@3000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
ranges;
reg = <0x3000000 0x10000>, /* GICD */
<0x3060000 0x100000>, /* GICR */
<0x00c0000 0x2000>, /* GICC */
<0x00d0000 0x1000>, /* GICH */
<0x00e0000 0x2000>; /* GICV */
gic_its_ap0: interrupt-controller@3040000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x3040000 0x20000>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
<0x410000 0x1000>;
msi-parent = <&gic_its_ap0 0xa0>;
dma-coherent;
};
xor@420000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x420000 0x1000>,
<0x430000 0x1000>;
msi-parent = <&gic_its_ap0 0xa1>;
dma-coherent;
};
xor@440000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x440000 0x1000>,
<0x450000 0x1000>;
msi-parent = <&gic_its_ap0 0xa2>;
dma-coherent;
};
xor@460000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x460000 0x1000>,
<0x470000 0x1000>;
msi-parent = <&gic_its_ap0 0xa3>;
dma-coherent;
};
uart0_ap0: serial@512000 {
compatible = "snps,dw-apb-uart";
reg = <0x512000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
uart1_ap0: serial@512100 {
compatible = "snps,dw-apb-uart";
reg = <0x512100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
};
};
};
...@@ -65,25 +65,44 @@ cpm_ethernet: ethernet@0 { ...@@ -65,25 +65,44 @@ cpm_ethernet: ethernet@0 {
reg = <0x0 0x100000>, <0x129000 0xb000>; reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk"; clock-names = "pp_clk", "gop_clk", "mg_clk";
marvell,system-controller = <&cpm_syscon0>;
status = "disabled"; status = "disabled";
dma-coherent; dma-coherent;
cpm_eth0: eth0 { cpm_eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <0>; port-id = <0>;
gop-port-id = <0>; gop-port-id = <0>;
status = "disabled"; status = "disabled";
}; };
cpm_eth1: eth1 { cpm_eth1: eth1 {
interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <1>; port-id = <1>;
gop-port-id = <2>; gop-port-id = <2>;
status = "disabled"; status = "disabled";
}; };
cpm_eth2: eth2 { cpm_eth2: eth2 {
interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <2>; port-id = <2>;
gop-port-id = <3>; gop-port-id = <3>;
status = "disabled"; status = "disabled";
...@@ -115,6 +134,13 @@ cpm_icu: interrupt-controller@1e0000 { ...@@ -115,6 +134,13 @@ cpm_icu: interrupt-controller@1e0000 {
msi-parent = <&gicp>; msi-parent = <&gicp>;
}; };
cpm_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cpm_syscon0: system-controller@440000 { cpm_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd"; compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>; reg = <0x440000 0x1000>;
...@@ -131,8 +157,12 @@ cpm_gpio1: gpio@100 { ...@@ -131,8 +157,12 @@ cpm_gpio1: gpio@100 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>; gpio-ranges = <&cpm_pinctrl 0 0 32>;
interrupt-controller;
interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled"; status = "disabled";
}; };
cpm_gpio2: gpio@140 { cpm_gpio2: gpio@140 {
...@@ -142,26 +172,15 @@ cpm_gpio2: gpio@140 { ...@@ -142,26 +172,15 @@ cpm_gpio2: gpio@140 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 32 31>; gpio-ranges = <&cpm_pinctrl 0 32 31>;
interrupt-controller;
interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled"; status = "disabled";
}; };
}; };
cpm_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_clk 1 15>;
status = "disabled";
};
cpm_usb3_0: usb3@500000 { cpm_usb3_0: usb3@500000 {
compatible = "marvell,armada-8k-xhci", compatible = "marvell,armada-8k-xhci",
"generic-xhci"; "generic-xhci";
...@@ -182,6 +201,15 @@ cpm_usb3_1: usb3@510000 { ...@@ -182,6 +201,15 @@ cpm_usb3_1: usb3@510000 {
status = "disabled"; status = "disabled";
}; };
cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_clk 1 15>;
status = "disabled";
};
cpm_xor0: xor@6a0000 { cpm_xor0: xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>, reg = <0x6a0000 0x1000>,
...@@ -240,6 +268,21 @@ cpm_i2c1: i2c@701100 { ...@@ -240,6 +268,21 @@ cpm_i2c1: i2c@701100 {
status = "disabled"; status = "disabled";
}; };
cpm_nand: nand@720000 {
/*
* Due to the limiation of the pin available
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
compatible = "marvell,armada370-nand";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_clk 1 2>;
status = "disabled";
};
cpm_trng: trng@760000 { cpm_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>; reg = <0x760000 0x7d>;
......
...@@ -60,37 +60,49 @@ config-space@f4000000 { ...@@ -60,37 +60,49 @@ config-space@f4000000 {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0x0 0x0 0xf4000000 0x2000000>; ranges = <0x0 0x0 0xf4000000 0x2000000>;
cps_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cps_ethernet: ethernet@0 { cps_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22"; compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>; reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk"; clock-names = "pp_clk", "gop_clk", "mg_clk";
marvell,system-controller = <&cps_syscon0>;
status = "disabled"; status = "disabled";
dma-coherent; dma-coherent;
cps_eth0: eth0 { cps_eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <0>; port-id = <0>;
gop-port-id = <0>; gop-port-id = <0>;
status = "disabled"; status = "disabled";
}; };
cps_eth1: eth1 { cps_eth1: eth1 {
interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <1>; port-id = <1>;
gop-port-id = <2>; gop-port-id = <2>;
status = "disabled"; status = "disabled";
}; };
cps_eth2: eth2 { cps_eth2: eth2 {
interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared";
port-id = <2>; port-id = <2>;
gop-port-id = <3>; gop-port-id = <3>;
status = "disabled"; status = "disabled";
...@@ -122,6 +134,13 @@ cps_icu: interrupt-controller@1e0000 { ...@@ -122,6 +134,13 @@ cps_icu: interrupt-controller@1e0000 {
msi-parent = <&gicp>; msi-parent = <&gicp>;
}; };
cps_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cps_syscon0: system-controller@440000 { cps_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd"; compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>; reg = <0x440000 0x1000>;
...@@ -138,8 +157,12 @@ cps_gpio1: gpio@100 { ...@@ -138,8 +157,12 @@ cps_gpio1: gpio@100 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 0 32>; gpio-ranges = <&cps_pinctrl 0 0 32>;
interrupt-controller;
interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled"; status = "disabled";
}; };
cps_gpio2: gpio@140 { cps_gpio2: gpio@140 {
...@@ -149,20 +172,16 @@ cps_gpio2: gpio@140 { ...@@ -149,20 +172,16 @@ cps_gpio2: gpio@140 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 32 31>; gpio-ranges = <&cps_pinctrl 0 32 31>;
interrupt-controller;
interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled"; status = "disabled";
}; };
}; };
cps_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cps_clk 1 15>;
status = "disabled";
};
cps_usb3_0: usb3@500000 { cps_usb3_0: usb3@500000 {
compatible = "marvell,armada-8k-xhci", compatible = "marvell,armada-8k-xhci",
"generic-xhci"; "generic-xhci";
...@@ -183,6 +202,15 @@ cps_usb3_1: usb3@510000 { ...@@ -183,6 +202,15 @@ cps_usb3_1: usb3@510000 {
status = "disabled"; status = "disabled";
}; };
cps_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cps_clk 1 15>;
status = "disabled";
};
cps_xor0: xor@6a0000 { cps_xor0: xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>, reg = <0x6a0000 0x1000>,
...@@ -241,6 +269,21 @@ cps_i2c1: i2c@701100 { ...@@ -241,6 +269,21 @@ cps_i2c1: i2c@701100 {
status = "disabled"; status = "disabled";
}; };
cps_nand: nand@720000 {
/*
* Due to the limiation of the pin available
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
compatible = "marvell,armada370-nand";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cps_clk 1 2>;
status = "disabled";
};
cps_trng: trng@760000 { cps_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>; reg = <0x760000 0x7d>;
......
dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y) always := $(dtb-y)
......
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: YT Shen <yt.shen@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include "mt2712e.dtsi"
/ {
model = "MediaTek MT2712 evaluation board";
compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
aliases {
serial0 = &uart0;
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
chosen {
stdout-path = "serial0:921600n8";
};
};
&uart0 {
status = "okay";
};
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: YT Shen <yt.shen@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "mediatek,mt2712";
interrupt-parent = <&sysirq>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
cluster1 {
core0 {
cpu = <&cpu2>;
};
};
};
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x001>;
enable-method = "psci";
};
cpu2: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x200>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
baud_clk: dummy26m {
compatible = "fixed-clock";
clock-frequency = <26000000>;
#clock-cells = <0>;
};
sys_clk: dummyclk {
compatible = "fixed-clock";
clock-frequency = <26000000>;
#clock-cells = <0>;
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
};
uart5: serial@1000f000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x1000f000 0 0x400>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
sysirq: interrupt-controller@10220a80 {
compatible = "mediatek,mt2712-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10220a80 0 0x40>;
};
gic: interrupt-controller@10510000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0 0x10510000 0 0x10000>,
<0 0x10520000 0 0x20000>,
<0 0x10540000 0 0x20000>,
<0 0x10560000 0 0x20000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
};
uart0: serial@11002000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
uart1: serial@11003000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
uart3: serial@11005000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
uart4: serial@11019000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
reg = <0 0x11019000 0 0x400>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
clocks = <&baud_clk>, <&sys_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
};
...@@ -108,13 +108,6 @@ clk26m: oscillator@0 { ...@@ -108,13 +108,6 @@ clk26m: oscillator@0 {
clock-output-names = "clk26m"; clock-output-names = "clk26m";
}; };
clk32k: oscillator@1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "clk32k";
};
timer { timer {
compatible = "arm,armv8-timer"; compatible = "arm,armv8-timer";
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
...@@ -147,6 +140,11 @@ scpsys: scpsys@10006000 { ...@@ -147,6 +140,11 @@ scpsys: scpsys@10006000 {
infracfg = <&infrasys>; infracfg = <&infrasys>;
}; };
watchdog: watchdog@10007000 {
compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt";
reg = <0 0x10007000 0 0x100>;
};
apmixedsys: apmixed@1000c000 { apmixedsys: apmixed@1000c000 {
compatible = "mediatek,mt6797-apmixedsys"; compatible = "mediatek,mt6797-apmixedsys";
reg = <0 0x1000c000 0 0x1000>; reg = <0 0x1000c000 0 0x1000>;
......
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: Ming Huang <ming.huang@mediatek.com>
* Sean Wang <sean.wang@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include "mt7622.dtsi"
/ {
model = "MediaTek MT7622 RFB1 board";
compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
chosen {
bootargs = "console=ttyS0,115200n1";
};
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
};
&uart0 {
status = "okay";
};
/*
* Copyright (c) 2017 MediaTek Inc.
* Author: Ming Huang <ming.huang@mediatek.com>
* Sean Wang <sean.wang@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "mediatek,mt7622";
interrupt-parent = <&sysirq>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
};
uart_clk: dummy25m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
bus_clk: dummy280m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <280000000>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
secmon_reserved: secmon@43000000 {
reg = <0 0x43000000 0 0x30000>;
no-map;
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
};
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200620 0 0x20>;
};
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10310000 0 0x1000>,
<0 0x10320000 0 0x1000>,
<0 0x10340000 0 0x2000>,
<0 0x10360000 0 0x2000>;
};
uart0: serial@11002000 {
compatible = "mediatek,mt7622-uart",
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>, <&bus_clk>;
clock-names = "baud", "bus";
status = "disabled";
};
};
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
......
...@@ -17,6 +17,7 @@ pinconf { ...@@ -17,6 +17,7 @@ pinconf {
function = PMIC_GPIO_FUNC_NORMAL; function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>; power-source = <PM8916_GPIO_VPH>;
input-disable; input-disable;
output-high;
}; };
}; };
......
...@@ -88,6 +88,8 @@ adv_bridge: bridge@39 { ...@@ -88,6 +88,8 @@ adv_bridge: bridge@39 {
interrupts = <31 2>; interrupts = <31 2>;
adi,dsi-lanes = <4>; adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
pd-gpios = <&msmgpio 32 0>; pd-gpios = <&msmgpio 32 0>;
...@@ -213,11 +215,14 @@ sdhci@07864000 { ...@@ -213,11 +215,14 @@ sdhci@07864000 {
}; };
usb@78d9000 { usb@78d9000 {
extcon = <&usb_id>, <&usb_id>; extcon = <&usb_id>;
status = "okay"; status = "okay";
adp-disable; adp-disable;
hnp-disable; hnp-disable;
srp-disable; srp-disable;
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb_sw_sel_pm>;
ulpi { ulpi {
phy { phy {
v1p8-supply = <&pm8916_l7>; v1p8-supply = <&pm8916_l7>;
...@@ -337,19 +342,11 @@ usb2513 { ...@@ -337,19 +342,11 @@ usb2513 {
usb_id: usb-id { usb_id: usb-id {
compatible = "linux,extcon-usb-gpio"; compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>; pinctrl-0 = <&usb_id_default>;
}; };
usb-switch {
compatible = "toshiba,tc7usb40mu";
switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
extcon = <&usb_id>;
pinctrl-names = "default";
pinctrl-0 = <&usb_sw_sel_pm>;
};
hdmi-out { hdmi-out {
compatible = "hdmi-connector"; compatible = "hdmi-connector";
type = "a"; type = "a";
......
...@@ -24,4 +24,28 @@ pinconf { ...@@ -24,4 +24,28 @@ pinconf {
power-source = <PM8994_GPIO_S4>; // 1.8V power-source = <PM8994_GPIO_S4>; // 1.8V
}; };
}; };
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pmi8994_gpios {
usb2_vbus_det_gpio: pmi8996_gpio6 {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
}; };
/dts-v1/;
/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "ipq8074.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart5;
};
chosen {
stdout-path = "serial0";
};
memory {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
soc {
pinctrl@1000000 {
serial_4_pins: serial4_pinmux {
mux {
pins = "gpio23", "gpio24";
function = "blsp4_uart1";
bias-disable;
};
};
};
serial@78b3000 {
pinctrl-0 = <&serial_4_pins>;
pinctrl-names = "default";
status = "ok";
};
};
};
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -8,6 +8,23 @@ pmic@2 { ...@@ -8,6 +8,23 @@ pmic@2 {
reg = <0x2 SPMI_USID>; reg = <0x2 SPMI_USID>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
pmi8994_gpios: gpios@c000 {
compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <2 0xc0 0 IRQ_TYPE_NONE>,
<2 0xc1 0 IRQ_TYPE_NONE>,
<2 0xc2 0 IRQ_TYPE_NONE>,
<2 0xc3 0 IRQ_TYPE_NONE>,
<2 0xc4 0 IRQ_TYPE_NONE>,
<2 0xc5 0 IRQ_TYPE_NONE>,
<2 0xc6 0 IRQ_TYPE_NONE>,
<2 0xc7 0 IRQ_TYPE_NONE>,
<2 0xc8 0 IRQ_TYPE_NONE>,
<2 0xc9 0 IRQ_TYPE_NONE>;
};
}; };
pmic@3 { pmic@3 {
......
...@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb ...@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
always := $(dtb-y) always := $(dtb-y)
clean-files := *.dtb clean-files := *.dtb
...@@ -9,8 +9,6 @@ ...@@ -9,8 +9,6 @@
* kind, whether express or implied. * kind, whether express or implied.
*/ */
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/; /dts-v1/;
#include "r8a7795-es1.dtsi" #include "r8a7795-es1.dtsi"
#include "ulcb.dtsi" #include "ulcb.dtsi"
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment