spi: spi-gpio: fix SPI_CS_HIGH capability

spi-gpio is capable of dealing with active-high chip-selects.
Unfortunately, commit 4b859db2 ("spi: spi-gpio: add SPI_3WIRE
support") broke this by setting master->mode_bits, which overrides
the setting in the spi-bitbang code.  Fix this.

[Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie]

Fixes: 4b859db2 ("spi: spi-gpio: add SPI_3WIRE support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-gpio.c

@@ -428,7 +428,8 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		return status;
 
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL;
+	master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL |
+			    SPI_CS_HIGH;
 	master->flags = master_flags;
 	master->bus_num = pdev->id;
 	/* The master needs to think there is a chipselect even if not connected */
@@ -455,7 +456,6 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
 	}
 	spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
-	spi_gpio->bitbang.flags = SPI_CS_HIGH;
 
 	status = spi_bitbang_start(&spi_gpio->bitbang);
 	if (status)