wifi: ath12k: remove MHI LOOPBACK channels

There is no driver to match these two channels, so
remove them. This fixes warnings from MHI subsystem during suspend:

mhi mhi0_LOOPBACK: 1: Failed to reset channel, still resetting
mhi mhi0_LOOPBACK: 0: Failed to reset channel, still resetting

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-3-quic_bqiang@quicinc.com

drivers/net/wireless/ath/ath12k/mhi.c

@@ -18,34 +18,6 @@
 #define OTP_VALID_DUALMAC_BOARD_ID_MASK		0x1000
 
 static const struct mhi_channel_config ath12k_mhi_channels_qcn9274[] = {
-	{
-		.num = 0,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 1,
-		.dir = DMA_TO_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
-	{
-		.num = 1,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 1,
-		.dir = DMA_FROM_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
 	{
 		.num = 20,
 		.name = "IPCR",
@@ -111,34 +83,6 @@ const struct mhi_controller_config ath12k_mhi_config_qcn9274 = {
 };
 
 static const struct mhi_channel_config ath12k_mhi_channels_wcn7850[] = {
-	{
-		.num = 0,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 0,
-		.dir = DMA_TO_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
-	{
-		.num = 1,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 0,
-		.dir = DMA_FROM_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
 	{
 		.num = 20,
 		.name = "IPCR",