scsi: lpfc: Change firmware upgrade logging to KERN_NOTICE instead of TRACE_EVENT

A firmware upgrade does not necessitate dumping of phba->dbg_log[] to kmsg
via LOG_TRACE_EVENT.  A simple KERN_NOTICE log message should suffice to
notify the user of successful or unsuccessful firmware upgrade.  As such,
firmware upgrade log messages are updated to use KERN_NOTICE instead of
LOG_TRACE_EVENT.  Additionally, in order to notify the user of reset type
for instantiating newly downloaded firmware, lpfc_log_msg's default
KERN_LEVEL is updated to 5 or KERN_NOTICE.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-6-justintee8345@gmail.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_init.c

@@ -14747,10 +14747,10 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
 	INIT_LIST_HEAD(&dma_buffer_list);
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
 	if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"3023 Updating Firmware, Current Version:%s "
-				"New Version:%s\n",
-				fwrev, image->revision);
+		lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
+			     "3023 Updating Firmware, Current Version:%s "
+			     "New Version:%s\n",
+			     fwrev, image->revision);
 		for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
 			dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
 					 GFP_KERNEL);
@@ -14797,10 +14797,10 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
 		}
 		rc = offset;
 	} else
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"3029 Skipped Firmware update, Current "
-				"Version:%s New Version:%s\n",
-				fwrev, image->revision);
+		lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
+			     "3029 Skipped Firmware update, Current "
+			     "Version:%s New Version:%s\n",
+			     fwrev, image->revision);
 
 release_out:
 	list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
@@ -14812,11 +14812,11 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
 	release_firmware(fw);
 out:
 	if (rc < 0)
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"3062 Firmware update error, status %d.\n", rc);
+		lpfc_log_msg(phba, KERN_ERR, LOG_INIT | LOG_SLI,
+			     "3062 Firmware update error, status %d.\n", rc);
 	else
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"3024 Firmware update success: size %d.\n", rc);
+		lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
+			     "3024 Firmware update success: size %d.\n", rc);
 }
 
 /**

drivers/scsi/lpfc/lpfc_logmsg.h

@@ -55,7 +55,7 @@ void lpfc_dbg_print(struct lpfc_hba *phba, const char *fmt, ...);
 
 /* generate message by verbose log setting or severity */
 #define lpfc_vlog_msg(vport, level, mask, fmt, arg...) \
-{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '4')) \
+{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '5')) \
 	dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
 		   fmt, (vport)->phba->brd_no, vport->vpi, ##arg); }
 
@@ -64,7 +64,7 @@ do { \
 	{ uint32_t log_verbose = (phba)->pport ? \
 				 (phba)->pport->cfg_log_verbose : \
 				 (phba)->cfg_log_verbose; \
-	if (((mask) & log_verbose) || (level[1] <= '4')) \
+	if (((mask) & log_verbose) || (level[1] <= '5')) \
 		dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
 			   fmt, phba->brd_no, ##arg); \
 	} \

drivers/scsi/lpfc/lpfc_sli.c

@@ -20800,23 +20800,23 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
 	if (shdr_add_status == LPFC_ADD_STATUS_INCOMPAT_OBJ) {
 		switch (shdr_add_status_2) {
 		case LPFC_ADD_STATUS_2_INCOMPAT_FLASH:
-			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
-					"4199 Firmware write failed: "
-					"image incompatible with flash x%02x\n",
-					phba->sli4_hba.flash_id);
+			lpfc_log_msg(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				     "4199 Firmware write failed: "
+				     "image incompatible with flash x%02x\n",
+				     phba->sli4_hba.flash_id);
 			break;
 		case LPFC_ADD_STATUS_2_INCORRECT_ASIC:
-			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
-					"4200 Firmware write failed: "
-					"image incompatible with ASIC "
-					"architecture x%02x\n",
-					phba->sli4_hba.asic_rev);
+			lpfc_log_msg(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				     "4200 Firmware write failed: "
+				     "image incompatible with ASIC "
+				     "architecture x%02x\n",
+				     phba->sli4_hba.asic_rev);
 			break;
 		default:
-			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
-					"4210 Firmware write failed: "
-					"add_status_2 x%02x\n",
-					shdr_add_status_2);
+			lpfc_log_msg(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				     "4210 Firmware write failed: "
+				     "add_status_2 x%02x\n",
+				     shdr_add_status_2);
 			break;
 		}
 	} else if (!shdr_status && !shdr_add_status) {
@@ -20829,26 +20829,26 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
 
 		switch (shdr_change_status) {
 		case (LPFC_CHANGE_STATUS_PHYS_DEV_RESET):
-			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-					"3198 Firmware write complete: System "
-					"reboot required to instantiate\n");
+			lpfc_log_msg(phba, KERN_NOTICE, LOG_MBOX | LOG_SLI,
+				     "3198 Firmware write complete: System "
+				     "reboot required to instantiate\n");
 			break;
 		case (LPFC_CHANGE_STATUS_FW_RESET):
-			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-					"3199 Firmware write complete: "
-					"Firmware reset required to "
-					"instantiate\n");
+			lpfc_log_msg(phba, KERN_NOTICE, LOG_MBOX | LOG_SLI,
+				     "3199 Firmware write complete: "
+				     "Firmware reset required to "
+				     "instantiate\n");
 			break;
 		case (LPFC_CHANGE_STATUS_PORT_MIGRATION):
-			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-					"3200 Firmware write complete: Port "
-					"Migration or PCI Reset required to "
-					"instantiate\n");
+			lpfc_log_msg(phba, KERN_NOTICE, LOG_MBOX | LOG_SLI,
+				     "3200 Firmware write complete: Port "
+				     "Migration or PCI Reset required to "
+				     "instantiate\n");
 			break;
 		case (LPFC_CHANGE_STATUS_PCI_RESET):
-			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-					"3201 Firmware write complete: PCI "
-					"Reset required to instantiate\n");
+			lpfc_log_msg(phba, KERN_NOTICE, LOG_MBOX | LOG_SLI,
+				     "3201 Firmware write complete: PCI "
+				     "Reset required to instantiate\n");
 			break;
 		default:
 			break;