staging: comedi: addi_apci_3120: remove analog output reset

The apci3120_reset() function is called at the end of the (*auto_attach) and
with the (*detach) is called to unload the driver. Part of this function
resets all the analog output channels to 0V.

There are two problems with this.
1) Only the APCI-3120 has analog outputs, the APCI-3001 does not.
2) The DA_READY bit in the status register needs to be checked before each
   write to update the analog outputs. It's unknown what the DA_READY bit
   does on the APCI-3001 board.

Just remove the analog output reset to avoid any problems.

Also, remove the unnecessary udelay() in apci3120_reset().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c

@@ -40,8 +40,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
   +----------+-----------+------------------------------------------------+
 */
 
-#include <linux/delay.h>
-
 /*
  * ADDON RELATED ADDITIONS
  */
@@ -578,22 +576,6 @@ static int apci3120_reset(struct comedi_device *dev)
 	devpriv->us_OutputRegister = 0;
 	outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
 
-	/*
-	 * Code to set the all anolog o/p channel to 0v 8191 is decimal
-	 * value for zero(0 v)volt in bipolar mode(default)
-	 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 1 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 2 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 3 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 4 */
-
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 5 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 6 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 7 */
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 8 */
-
-	udelay(10);
-
 	inw(dev->iobase + 0);	/* make a dummy read */
 	inb(dev->iobase + APCI3120_RESET_FIFO);	/*  flush FIFO */
 	inw(dev->iobase + APCI3120_RD_STATUS);	/*  flush A/D status register */