usb: Create separate header for ehci-dbgp

The FUSBH200 and FOTG210 controllers implement sufficiently EHCI-
compatible debug ports to leverage ehci-dbgp from their respective
drivers.  Rather than including <linux/usb/ehci_def.h> header, though,
they replicate the necessary declarations in their own headers.  Move
the ehci-dbgp stuff into its own header as a first step towards removing
this redundancy.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

include/linux/usb/ehci-dbgp.h

+/*
+ * Standalone EHCI usb debug driver
+ *
+ * Originally written by:
+ *  Eric W. Biederman" <ebiederm@xmission.com> and
+ *  Yinghai Lu <yhlu.kernel@gmail.com>
+ *
+ * Changes for early/late printk and HW errata:
+ *  Jason Wessel <jason.wessel@windriver.com>
+ *  Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ */
+
+#ifndef __LINUX_USB_EHCI_DBGP_H
+#define __LINUX_USB_EHCI_DBGP_H
+
+#include <linux/console.h>
+#include <linux/types.h>
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+struct usb_hcd;
+
+#ifdef CONFIG_XEN_DOM0
+extern int xen_dbgp_reset_prep(struct usb_hcd *);
+extern int xen_dbgp_external_startup(struct usb_hcd *);
+#else
+static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
+{
+	return 1; /* Shouldn't this be 0? */
+}
+
+static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
+{
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from ehci host driver to ehci debug driver */
+extern int dbgp_external_startup(struct usb_hcd *);
+extern int dbgp_reset_prep(struct usb_hcd *);
+#else
+static inline int dbgp_reset_prep(struct usb_hcd *hcd)
+{
+	return xen_dbgp_reset_prep(hcd);
+}
+
+static inline int dbgp_external_startup(struct usb_hcd *hcd)
+{
+	return xen_dbgp_external_startup(hcd);
+}
+#endif
+
+#endif /* __LINUX_USB_EHCI_DBGP_H */

include/linux/usb/ehci_def.h

@@ -19,6 +19,8 @@
 #ifndef __LINUX_USB_EHCI_DEF_H
 #define __LINUX_USB_EHCI_DEF_H
 
+#include <linux/usb/ehci-dbgp.h>
+
 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
 
 /* Section 2.2 Host Controller Capability Registers */
@@ -190,67 +192,4 @@ struct ehci_regs {
 #define USBMODE_EX_HC	(3<<0)		/* host controller mode */
 };
 
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
-};
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-#include <linux/init.h>
-extern int __init early_dbgp_init(char *s);
-extern struct console early_dbgp_console;
-#endif /* CONFIG_EARLY_PRINTK_DBGP */
-
-struct usb_hcd;
-
-#ifdef CONFIG_XEN_DOM0
-extern int xen_dbgp_reset_prep(struct usb_hcd *);
-extern int xen_dbgp_external_startup(struct usb_hcd *);
-#else
-static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
-{
-	return 1; /* Shouldn't this be 0? */
-}
-
-static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-/* Call backs from ehci host driver to ehci debug driver */
-extern int dbgp_external_startup(struct usb_hcd *);
-extern int dbgp_reset_prep(struct usb_hcd *hcd);
-#else
-static inline int dbgp_reset_prep(struct usb_hcd *hcd)
-{
-	return xen_dbgp_reset_prep(hcd);
-}
-static inline int dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return xen_dbgp_external_startup(hcd);
-}
-#endif
-
 #endif /* __LINUX_USB_EHCI_DEF_H */