Skip to content

L
linux
Commit ba16ec7c authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

ARM: OMAP: Remove old dead gpio expander code 

This should be done with GPIO calls. Patches against the
mainline tree welcome to add the necessary working functionality
back.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent da1b94e6
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 235 deletions
arch/arm/mach-omap1/board-h3.c
View file @ ba16ec7c
......@@ -39,12 +39,10 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
......@@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
.resource = h3_kp_resources,
};
/* Select between the IrDA and aGPS module
*/
static int h3_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x26))) {
printk(KERN_ERR "Error reading from I/O EXPANDER \n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDA */
if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
}
return err;
}
static void set_trans_mode(struct work_struct *work)
{
struct omap_irda_config *irda_config =
container_of(work, struct omap_irda_config, gpio_expa.work);
int mode = irda_config->mode;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x03;
if (mode & IR_SIRMODE) {
expa |= 0x01;
} else { /* MIR/FIR */
expa |= 0x03;
}
if ((err = write_gpio_expa(expa, 0x27)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h3_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
irda_config->mode = mode;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
schedule_delayed_work(&irda_config->gpio_expa, 0);
return 0;
}
static struct omap_irda_config h3_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h3_transceiver_mode,
.select_irda = h3_select_irda,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource h3_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
};
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
......@@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
&nand_device,
&smc91x_device,
&intlat_device,
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
......
arch/arm/mach-omap2/board-h4.c
View file @ ba16ec7c
......@@ -33,10 +33,8 @@
#include <mach/control.h>
#include <mach/gpio.h>
#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
......@@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
/* Select between the IrDA and aGPS module
*/
static int h4_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x21))) {
printk(KERN_ERR "Error reading from I/O expander\n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDa */
if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
}
return err;
}
static void set_trans_mode(struct work_struct *work)
{
struct omap_irda_config *irda_config =
container_of(work, struct omap_irda_config, gpio_expa.work);
int mode = irda_config->mode;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x01;
if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
expa |= 0x01;
}
if ((err = write_gpio_expa(expa, 0x20)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h4_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
irda_config->mode = mode;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
schedule_delayed_work(&irda_config->gpio_expa, 0);
return 0;
}
static struct omap_irda_config h4_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h4_transceiver_mode,
.select_irda = h4_select_irda,
.rx_channel = OMAP24XX_DMA_UART3_RX,
.tx_channel = OMAP24XX_DMA_UART3_TX,
.dest_start = OMAP_UART3_BASE,
.src_start = OMAP_UART3_BASE,
.tx_trigger = OMAP24XX_DMA_UART3_TX,
.rx_trigger = OMAP24XX_DMA_UART3_RX,
};
static struct resource h4_irda_resources[] = {
[0] = {
.start = INT_24XX_UART3_IRQ,
.end = INT_24XX_UART3_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h4_irda_device = {
.name = "omapirda",
.id = -1,
.dev = {
.platform_data = &h4_irda_data,
},
.num_resources = 1,
.resource = h4_irda_resources,
};
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
......@@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = {
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
......
arch/arm/plat-omap/include/mach/gpioexpander.h deleted 100644 → 0
View file @ da1b94e6
/*
* arch/arm/plat-omap/include/mach/gpioexpander.h
*
*
* Copyright (C) 2004 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
/* Function Prototypes for GPIO Expander functions */
#ifdef CONFIG_GPIOEXPANDER_OMAP
int read_gpio_expa(u8 *, int);
int write_gpio_expa(u8 , int);
#else
static inline int read_gpio_expa(u8 *val, int addr)
{
return 0;
}
static inline int write_gpio_expa(u8 val, int addr)
{
return 0;
}
#endif
#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
arch/arm/plat-omap/include/mach/irda.h
View file @ ba16ec7c
......@@ -21,10 +21,6 @@ struct omap_irda_config {
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
/* Very specific to the needs of some platforms (h3,h4)
* having calls which can sleep in irda_set_speed.
*/
struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7