ASoC: sunxi: Add support for A23/A33/H3 codec's analog path controls

The internal codec on A23/A33/H3 is split into 2 parts. The
analog path controls are routed through an embedded custom register
bus accessed through the PRCM block.

The SoCs share a common set of inputs, outputs, and audio paths.
The following table lists the differences.

    ----------------------------------------
    | Feature \ SoC |  A23  |  A33  |  H3  |
    ----------------------------------------
    | Headphone     |   v   |   v   |      |
    ----------------------------------------
    | Line Out      |       |       |  v   |
    ----------------------------------------
    | Phone In/Out  |   v   |   v   |      |
    ----------------------------------------

Add an ASoC component driver for it. This should be tied to the codec
audio card as an auxiliary device. This patch adds the commont paths
and controls, and variant specific headphone out and line out.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sunxi/Kconfig

@@ -9,6 +9,14 @@ config SND_SUN4I_CODEC
 	  Select Y or M to add support for the Codec embedded in the Allwinner
 	  A10 and affiliated SoCs.
 
+config SND_SUN8I_CODEC_ANALOG
+	tristate "Allwinner sun8i Codec Analog Controls Support"
+	depends on MACH_SUN8I || COMPILE_TEST
+	select REGMAP
+	help
+	  Say Y or M if you want to add support for the analog controls for
+	  the codec embedded in newer Allwinner SoCs.
+
 config SND_SUN4I_I2S
 	tristate "Allwinner A10 I2S Support"
 	select SND_SOC_GENERIC_DMAENGINE_PCM

sound/soc/sunxi/Makefile

 obj-$(CONFIG_SND_SUN4I_CODEC) += sun4i-codec.o
 obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
 obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
+obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o