Commit ba4d07a8 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

[TG3]: Add 1000T & 1000X flowctl adv helpers

This patch adds two functions designed to convert abstract TX & RX
flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation
advertisements.  Code that uses standard definitions which statically
advertises TX & RX flow control has been replaced with code that
configures the advertisements based on administrator dictated
preferences.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 95937268
......@@ -1612,6 +1612,38 @@ static void tg3_link_report(struct tg3 *tp)
}
}
static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl)
{
u16 miireg;
if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
miireg = ADVERTISE_PAUSE_CAP;
else if (flow_ctrl & TG3_FLOW_CTRL_TX)
miireg = ADVERTISE_PAUSE_ASYM;
else if (flow_ctrl & TG3_FLOW_CTRL_RX)
miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
else
miireg = 0;
return miireg;
}
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
{
u16 miireg;
if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
miireg = ADVERTISE_1000XPAUSE;
else if (flow_ctrl & TG3_FLOW_CTRL_TX)
miireg = ADVERTISE_1000XPSE_ASYM;
else if (flow_ctrl & TG3_FLOW_CTRL_RX)
miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
else
miireg = 0;
return miireg;
}
static u8 tg3_resolve_flowctrl_1000T(u16 lcladv, u16 rmtadv)
{
u8 cap = 0;
......@@ -1764,7 +1796,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
~(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
new_adv = (ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
new_adv = ADVERTISE_CSMA;
if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
new_adv |= ADVERTISE_10HALF;
if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
......@@ -1773,6 +1805,9 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
new_adv |= ADVERTISE_100HALF;
if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
new_adv |= ADVERTISE_100FULL;
new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.advertising &
......@@ -1792,9 +1827,11 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_CTRL, 0);
}
} else {
new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
new_adv |= ADVERTISE_CSMA;
/* Asking for a specific link mode. */
if (tp->link_config.speed == SPEED_1000) {
new_adv = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP;
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.duplex == DUPLEX_FULL)
......@@ -1805,11 +1842,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
} else {
tg3_writephy(tp, MII_TG3_CTRL, 0);
new_adv = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP;
if (tp->link_config.speed == SPEED_100) {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv |= ADVERTISE_100FULL;
......@@ -1822,7 +1855,11 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
new_adv |= ADVERTISE_10HALF;
}
tg3_writephy(tp, MII_ADVERTISE, new_adv);
new_adv = 0;
}
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
......@@ -2118,17 +2155,15 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
if (tg3_readphy(tp, MII_ADVERTISE, &local_adv))
local_adv = 0;
local_adv &= (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
if (tg3_readphy(tp, MII_LPA, &remote_adv))
remote_adv = 0;
remote_adv &= (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
/* If we are not advertising full pause capability,
* something is wrong. Bring the link down and reconfigure.
/* If we are not advertising what has been requested,
* bring the link down and reconfigure.
*/
if (local_adv != ADVERTISE_PAUSE_CAP) {
if (local_adv !=
tg3_advert_flowctrl_1000T(tp->link_config.flowctrl)) {
current_link_up = 0;
} else {
tg3_setup_flow_control(tp, local_adv, remote_adv);
......@@ -2973,8 +3008,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
ADVERTISE_1000XPSE_ASYM |
ADVERTISE_SLCT);
/* Always advertise symmetric PAUSE just like copper */
new_adv |= ADVERTISE_1000XPAUSE;
new_adv |= tg3_advert_flowctrl_1000X(tp->link_config.flowctrl);
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
new_adv |= ADVERTISE_1000XHALF;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment