Merge tag 'soc-fsl-next-v5.11' of...

Merge tag 'soc-fsl-next-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.11

- Add RCPM errata workaround for A-008646 on LS1021A
- Various W=1 warning fixes for fsl/soc drivers

* tag 'soc-fsl-next-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: handle RCPM errata A-008646 on SoC LS1021A
  soc: fsl: qbman: qman: Remove unused variable 'dequeue_wq'
  soc: fsl: qe: qe_common: Fix misnamed function attribute 'addr'
  soc: fsl: dpio: qbman-portal: Fix a bunch of kernel-doc misdemeanours

Link: https://lore.kernel.org/r/20201125165913.15441-1-leoyang.li@nxp.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/soc/fsl/dpio/qbman-portal.c

@@ -424,7 +424,7 @@ int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p)
 /**
  * qbman_swp_interrupt_set_inhibit() - write interrupt mask register
  * @p: the given software portal object
- * @mask: The mask to set in SWP_IIR register
+ * @inhibit: whether to inhibit the IRQs
  */
 void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit)
 {
@@ -510,7 +510,7 @@ enum qb_enqueue_commands {
 #define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT     4
 #define QB_ENQUEUE_CMD_DCA_EN_SHIFT          7
 
-/**
+/*
  * qbman_eq_desc_clear() - Clear the contents of a descriptor to
  *                         default/starting state.
  */
@@ -522,7 +522,7 @@ void qbman_eq_desc_clear(struct qbman_eq_desc *d)
 /**
  * qbman_eq_desc_set_no_orp() - Set enqueue descriptor without orp
  * @d:                the enqueue descriptor.
- * @response_success: 1 = enqueue with response always; 0 = enqueue with
+ * @respond_success:  1 = enqueue with response always; 0 = enqueue with
  *                    rejections returned on a FQ.
  */
 void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success)
@@ -932,7 +932,7 @@ int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
 
 /**
  * qbman_swp_push_get() - Get the push dequeue setup
- * @p:           the software portal object
+ * @s:           the software portal object
  * @channel_idx: the channel index to query
  * @enabled:     returned boolean to show whether the push dequeue is enabled
  *               for the given channel
@@ -947,7 +947,7 @@ void qbman_swp_push_get(struct qbman_swp *s, u8 channel_idx, int *enabled)
 
 /**
  * qbman_swp_push_set() - Enable or disable push dequeue
- * @p:           the software portal object
+ * @s:           the software portal object
  * @channel_idx: the channel index (0 to 15)
  * @enable:      enable or disable push dequeue
  */
@@ -1046,6 +1046,7 @@ void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes)
 
 /**
  * qbman_pull_desc_set_fq() - Set fqid from which the dequeue command dequeues
+ * @d:    the pull dequeue descriptor to be set
  * @fqid: the frame queue index of the given FQ
  */
 void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid)
@@ -1057,6 +1058,7 @@ void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid)
 
 /**
  * qbman_pull_desc_set_wq() - Set wqid from which the dequeue command dequeues
+ * @d:    the pull dequeue descriptor to be set
  * @wqid: composed of channel id and wqid within the channel
  * @dct:  the dequeue command type
  */
@@ -1071,6 +1073,7 @@ void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
 /**
  * qbman_pull_desc_set_channel() - Set channelid from which the dequeue command
  *                                 dequeues
+ * @d:    the pull dequeue descriptor to be set
  * @chid: the channel id to be dequeued
  * @dct:  the dequeue command type
  */
@@ -1398,6 +1401,7 @@ int qbman_result_has_new_result(struct qbman_swp *s, const struct dpaa2_dq *dq)
 /**
  * qbman_release_desc_clear() - Clear the contents of a descriptor to
  *                              default/starting state.
+ * @d: the pull dequeue descriptor to be cleared
  */
 void qbman_release_desc_clear(struct qbman_release_desc *d)
 {
@@ -1407,6 +1411,8 @@ void qbman_release_desc_clear(struct qbman_release_desc *d)
 
 /**
  * qbman_release_desc_set_bpid() - Set the ID of the buffer pool to release to
+ * @d:    the pull dequeue descriptor to be set
+ * @bpid: the bpid value to be set
  */
 void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid)
 {
@@ -1416,6 +1422,8 @@ void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid)
 /**
  * qbman_release_desc_set_rcdi() - Determines whether or not the portal's RCDI
  * interrupt source should be asserted after the release command is completed.
+ * @d:      the pull dequeue descriptor to be set
+ * @enable: enable (1) or disable (0) value
  */
 void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable)
 {

drivers/soc/fsl/qbman/qman.c

@@ -2622,7 +2622,7 @@ int qman_shutdown_fq(u32 fqid)
 	union qm_mc_command *mcc;
 	union qm_mc_result *mcr;
 	int orl_empty, drain = 0, ret = 0;
-	u32 channel, wq, res;
+	u32 channel, res;
 	u8 state;
 
 	p = get_affine_portal();
@@ -2655,7 +2655,7 @@ int qman_shutdown_fq(u32 fqid)
 	DPAA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) == QM_MCR_VERB_QUERYFQ);
 	/* Need to store these since the MCR gets reused */
 	channel = qm_fqd_get_chan(&mcr->queryfq.fqd);
-	wq = qm_fqd_get_wq(&mcr->queryfq.fqd);
+	qm_fqd_get_wq(&mcr->queryfq.fqd);
 
 	if (channel < qm_channel_pool1) {
 		channel_portal = get_portal_for_channel(channel);
@@ -2697,7 +2697,6 @@ int qman_shutdown_fq(u32 fqid)
 			 * to dequeue from the channel the FQ is scheduled on
 			 */
 			int found_fqrn = 0;
-			u16 dequeue_wq = 0;
 
 			/* Flag that we need to drain FQ */
 			drain = 1;
@@ -2705,11 +2704,8 @@ int qman_shutdown_fq(u32 fqid)
 			if (channel >= qm_channel_pool1 &&
 			    channel < qm_channel_pool1 + 15) {
 				/* Pool channel, enable the bit in the portal */
-				dequeue_wq = (channel -
-					      qm_channel_pool1 + 1)<<4 | wq;
 			} else if (channel < qm_channel_pool1) {
 				/* Dedicated channel */
-				dequeue_wq = wq;
 			} else {
 				dev_err(dev, "Can't recover FQ 0x%x, ch: 0x%x",
 					fqid, channel);

drivers/soc/fsl/qe/qe_common.c

@@ -231,7 +231,7 @@ EXPORT_SYMBOL(cpm_muram_offset);
 
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
- * @offset: virtual address from cpm_muram_addr() to convert
+ * @addr: virtual address from cpm_muram_addr() to convert
  */
 dma_addr_t cpm_muram_dma(void __iomem *addr)
 {

drivers/soc/fsl/rcpm.c

@@ -2,7 +2,7 @@
 //
 // rcpm.c - Freescale QorIQ RCPM driver
 //
-// Copyright 2019 NXP
+// Copyright 2019-2020 NXP
 //
 // Author: Ran Wang <ran.wang_1@nxp.com>
 
@@ -22,6 +22,28 @@ struct rcpm {
 	bool		little_endian;
 };
 
+#define  SCFG_SPARECR8	0x051c
+
+static void copy_ippdexpcr1_setting(u32 val)
+{
+	struct device_node *np;
+	void __iomem *regs;
+	u32 reg_val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-scfg");
+	if (!np)
+		return;
+
+	regs = of_iomap(np, 0);
+	if (!regs)
+		return;
+
+	reg_val = ioread32be(regs + SCFG_SPARECR8);
+	iowrite32be(val | reg_val, regs + SCFG_SPARECR8);
+
+	iounmap(regs);
+}
+
 /**
  * rcpm_pm_prepare - performs device-level tasks associated with power
  * management, such as programming related to the wakeup source control.
@@ -90,6 +112,17 @@ static int rcpm_pm_prepare(struct device *dev)
 			tmp |= ioread32be(address);
 			iowrite32be(tmp, address);
 		}
+		/*
+		 * Workaround of errata A-008646 on SoC LS1021A:
+		 * There is a bug of register ippdexpcr1.
+		 * Reading configuration register RCPM_IPPDEXPCR1
+		 * always return zero. So save ippdexpcr1's value
+		 * to register SCFG_SPARECR8.And the value of
+		 * ippdexpcr1 will be read from SCFG_SPARECR8.
+		 */
+		if (dev_of_node(dev) && (i == 1))
+			if (of_device_is_compatible(np, "fsl,ls1021a-rcpm"))
+				copy_ippdexpcr1_setting(tmp);
 	}
 
 	return 0;