Commit ba9d1e2a authored by Kumar Gala's avatar Kumar Gala Committed by Linus Torvalds

[PATCH] ppc32: Remove board support for K2

Support for the K2 board is no longer maintained and thus being removed
Signed-off-by: default avatarKumar Gala <kumar.gala@freescale.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 94cb20e9
...@@ -637,9 +637,6 @@ config SANDPOINT ...@@ -637,9 +637,6 @@ config SANDPOINT
config RADSTONE_PPC7D config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board" bool "Radstone Technology PPC7D board"
config K2
bool "SBS-K2"
config PAL4 config PAL4
bool "SBS-Palomar4" bool "SBS-Palomar4"
...@@ -794,7 +791,7 @@ config PPC_OF ...@@ -794,7 +791,7 @@ config PPC_OF
config PPC_GEN550 config PPC_GEN550
bool bool
depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \ depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
PRPMC750 || K2 || PRPMC800 || LOPEC || \ PRPMC750 || PRPMC800 || LOPEC || \
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
83xx 83xx
default y default y
...@@ -883,10 +880,6 @@ config SANDPOINT_ENABLE_UART1 ...@@ -883,10 +880,6 @@ config SANDPOINT_ENABLE_UART1
If this option is enabled then the MPC824x processor will run If this option is enabled then the MPC824x processor will run
in DUART mode instead of UART mode. in DUART mode instead of UART mode.
config CPC710_DATA_GATHERING
bool "Enable CPC710 data gathering"
depends on K2
config HARRIER_STORE_GATHERING config HARRIER_STORE_GATHERING
bool "Enable Harrier store gathering" bool "Enable Harrier store gathering"
depends on HARRIER depends on HARRIER
......
...@@ -96,10 +96,6 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE ...@@ -96,10 +96,6 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF
end-$(CONFIG_GEMINI) := gemini end-$(CONFIG_GEMINI) := gemini
extra.o-$(CONFIG_K2) := prepmap.o
end-$(CONFIG_K2) := k2
cacheflag-$(CONFIG_K2) := -include $(clear_L2_L3)
extra.o-$(CONFIG_KATANA) := misc-katana.o extra.o-$(CONFIG_KATANA) := misc-katana.o
end-$(CONFIG_KATANA) := katana end-$(CONFIG_KATANA) := katana
cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3)
......
This diff is collapsed.
...@@ -27,7 +27,6 @@ obj-$(CONFIG_CPCI690) += cpci690.o ...@@ -27,7 +27,6 @@ obj-$(CONFIG_CPCI690) += cpci690.o
obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_EV64260) += ev64260.o
obj-$(CONFIG_CHESTNUT) += chestnut.o obj-$(CONFIG_CHESTNUT) += chestnut.o
obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o
obj-$(CONFIG_K2) += k2.o
obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_LOPEC) += lopec.o
obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_KATANA) += katana.o
obj-$(CONFIG_HDPU) += hdpu.o obj-$(CONFIG_HDPU) += hdpu.o
......
This diff is collapsed.
/*
* arch/ppc/platforms/k2.h
*
* Definitions for SBS K2 board support
*
* Author: Matt Porter <mporter@mvista.com>
*
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __PPC_PLATFORMS_K2_H
#define __PPC_PLATFORMS_K2_H
/*
* SBS K2 definitions
*/
#define K2_PCI64_BAR 0xff400000
#define K2_PCI32_BAR 0xff500000
#define K2_PCI64_CONFIG_ADDR (K2_PCI64_BAR + 0x000f8000)
#define K2_PCI64_CONFIG_DATA (K2_PCI64_BAR + 0x000f8010)
#define K2_PCI32_CONFIG_ADDR (K2_PCI32_BAR + 0x000f8000)
#define K2_PCI32_CONFIG_DATA (K2_PCI32_BAR + 0x000f8010)
#define K2_PCI64_MEM_BASE 0xd0000000
#define K2_PCI64_IO_BASE 0x80100000
#define K2_PCI32_MEM_BASE 0xc0000000
#define K2_PCI32_IO_BASE 0x80000000
#define K2_PCI32_SYS_MEM_BASE 0x80000000
#define K2_PCI64_SYS_MEM_BASE K2_PCI32_SYS_MEM_BASE
#define K2_PCI32_LOWER_MEM 0x00000000
#define K2_PCI32_UPPER_MEM 0x0fffffff
#define K2_PCI32_LOWER_IO 0x00000000
#define K2_PCI32_UPPER_IO 0x000fffff
#define K2_PCI64_LOWER_MEM 0x10000000
#define K2_PCI64_UPPER_MEM 0x1fffffff
#define K2_PCI64_LOWER_IO 0x00100000
#define K2_PCI64_UPPER_IO 0x001fffff
#define K2_ISA_IO_BASE K2_PCI32_IO_BASE
#define K2_ISA_MEM_BASE K2_PCI32_MEM_BASE
#define K2_BOARD_ID_REG (K2_ISA_IO_BASE + 0x800)
#define K2_MISC_REG (K2_ISA_IO_BASE + 0x804)
#define K2_MSIZ_GEO_REG (K2_ISA_IO_BASE + 0x808)
#define K2_HOT_SWAP_REG (K2_ISA_IO_BASE + 0x80c)
#define K2_PLD2_REG (K2_ISA_IO_BASE + 0x80e)
#define K2_PLD3_REG (K2_ISA_IO_BASE + 0x80f)
#define K2_BUS_SPD(board_id) (board_id >> 2) & 3
#define K2_RTC_BASE_OFFSET 0x90000
#define K2_RTC_BASE_ADDRESS (K2_PCI32_MEM_BASE + K2_RTC_BASE_OFFSET)
#define K2_RTC_SIZE 0x8000
#define K2_MEM_SIZE_MASK 0xe0
#define K2_MEM_SIZE(size_reg) (size_reg & K2_MEM_SIZE_MASK) >> 5
#define K2_MEM_SIZE_1GB 0x40000000
#define K2_MEM_SIZE_512MB 0x20000000
#define K2_MEM_SIZE_256MB 0x10000000
#define K2_MEM_SIZE_128MB 0x08000000
#define K2_L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
#define K2_L2CACHE_512KB 0x00 /* 512KB */
#define K2_L2CACHE_256KB 0x01 /* 256KB */
#define K2_L2CACHE_1MB 0x02 /* 1MB */
#define K2_L2CACHE_NONE 0x03 /* None */
#define K2_GEO_ADR_MASK 0x1f
#define K2_SYS_SLOT_MASK 0x08
#endif /* __PPC_PLATFORMS_K2_H */
...@@ -50,8 +50,6 @@ obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o ...@@ -50,8 +50,6 @@ obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o
obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o
obj-$(CONFIG_GEMINI) += open_pic.o indirect_pci.o obj-$(CONFIG_GEMINI) += open_pic.o indirect_pci.o
obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o
obj-$(CONFIG_K2) += i8259.o indirect_pci.o todc_time.o \
pci_auto.o
obj-$(CONFIG_LOPEC) += i8259.o pci_auto.o todc_time.o obj-$(CONFIG_LOPEC) += i8259.o pci_auto.o todc_time.o
obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_HDPU) += pci_auto.o
obj-$(CONFIG_LUAN) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_LUAN) += indirect_pci.o pci_auto.o todc_time.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment