Commit bac07ecd authored by Daniel Mack's avatar Daniel Mack Committed by Eric Miao

[ARM] pxa: Colibri PXA320 module basics

This adds basic support for Colibri PXA320 modules.
The file colibri-320.c only contains settings specific to this module,
such as the Ethernet interface.

Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: default avatarDaniel Mack <daniel@caiaq.de>
Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
parent acb36559
...@@ -270,6 +270,11 @@ config MACH_COLIBRI300 ...@@ -270,6 +270,11 @@ config MACH_COLIBRI300
select PXA3xx select PXA3xx
select CPU_PXA300 select CPU_PXA300
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
config MACH_ZYLONITE config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)" bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx select PXA3xx
......
...@@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o ...@@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
......
/*
* arch/arm/mach-pxa/colibri-pxa320.c
*
* Support for Toradex PXA320/310 based Colibri module
*
* Daniel Mack <daniel@caiaq.de>
* Matthias Meier <matthias.j.meier@gmx.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <net/ax88796.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa320.h>
#include <mach/colibri.h>
#include <mach/ohci.h>
#include "generic.h"
#include "devices.h"
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
.flags = AXFLG_MAC_FROMDEV,
.wordlength = 2
};
static struct resource colibri_asix_resource[] = {
[0] = {
.start = PXA3xx_CS2_PHYS,
.end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ
}
};
static struct platform_device asix_device = {
.name = "ax88796",
.id = 0,
.num_resources = ARRAY_SIZE(colibri_asix_resource),
.resource = colibri_asix_resource,
.dev = {
.platform_data = &colibri_asix_platdata
}
};
static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
GPIO3_nCS2, /* AX88796 chip select */
GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
};
static void __init colibri_pxa320_init_eth(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
GPIO2_2_USBH_PEN,
GPIO3_2_USBH_PWR,
};
static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
.port_mode = PMM_GLOBAL_MODE,
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
void __init colibri_pxa320_init_ohci(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
pxa_set_ohci_info(&colibri_pxa320_ohci_info);
}
#else
static inline void colibri_pxa320_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
GPIO18_MMC1_DAT0,
GPIO19_MMC1_DAT1,
GPIO20_MMC1_DAT2,
GPIO21_MMC1_DAT3
};
void __init colibri_pxa320_init(void)
{
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment