Commit baf4974e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - print debug data when testing AUX IRQ delivery
  Input: libps2 - fix dependancy on i8042
  Input: fix rx51 board keymap
  Input: ad7879 - pass up error codes from probe functions
  Input: xpad - add BigBen Interactive XBOX 360 Controller
  Input: rotary_encoder - fix relative axis support
  Input: sparkspkr - move remove() functions to .devexit.text
  Input: wistron_btns - add DMI entry for Medion WIM2030 laptop
parents 79a6f564 d3d2dfe2
......@@ -38,49 +38,49 @@
static int board_keymap[] = {
KEY(0, 0, KEY_Q),
KEY(0, 1, KEY_W),
KEY(0, 2, KEY_E),
KEY(0, 3, KEY_R),
KEY(0, 4, KEY_T),
KEY(0, 5, KEY_Y),
KEY(0, 6, KEY_U),
KEY(0, 7, KEY_I),
KEY(1, 0, KEY_O),
KEY(0, 1, KEY_O),
KEY(0, 2, KEY_P),
KEY(0, 3, KEY_COMMA),
KEY(0, 4, KEY_BACKSPACE),
KEY(0, 6, KEY_A),
KEY(0, 7, KEY_S),
KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
KEY(1, 2, KEY_DOT),
KEY(1, 3, KEY_V),
KEY(1, 4, KEY_DOWN),
KEY(2, 0, KEY_P),
KEY(2, 1, KEY_F),
KEY(1, 2, KEY_F),
KEY(1, 3, KEY_G),
KEY(1, 4, KEY_H),
KEY(1, 5, KEY_J),
KEY(1, 6, KEY_K),
KEY(1, 7, KEY_L),
KEY(2, 0, KEY_E),
KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
KEY(2, 3, KEY_B),
KEY(2, 4, KEY_RIGHT),
KEY(3, 0, KEY_COMMA),
KEY(3, 1, KEY_G),
KEY(3, 2, KEY_ENTER),
KEY(2, 3, KEY_ENTER),
KEY(2, 5, KEY_Z),
KEY(2, 6, KEY_X),
KEY(2, 7, KEY_C),
KEY(3, 0, KEY_R),
KEY(3, 1, KEY_V),
KEY(3, 2, KEY_B),
KEY(3, 3, KEY_N),
KEY(4, 0, KEY_BACKSPACE),
KEY(4, 1, KEY_H),
KEY(4, 3, KEY_M),
KEY(3, 4, KEY_M),
KEY(3, 5, KEY_SPACE),
KEY(3, 6, KEY_SPACE),
KEY(3, 7, KEY_LEFT),
KEY(4, 0, KEY_T),
KEY(4, 1, KEY_DOWN),
KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
KEY(5, 1, KEY_J),
KEY(5, 2, KEY_Z),
KEY(5, 3, KEY_SPACE),
KEY(5, 4, KEY_LEFTSHIFT),
KEY(6, 0, KEY_A),
KEY(6, 1, KEY_K),
KEY(6, 2, KEY_X),
KEY(6, 3, KEY_SPACE),
KEY(6, 4, KEY_FN),
KEY(7, 0, KEY_S),
KEY(7, 1, KEY_L),
KEY(7, 2, KEY_C),
KEY(7, 3, KEY_LEFT),
KEY(0xff, 0, KEY_F6),
KEY(0xff, 1, KEY_F7),
KEY(0xff, 2, KEY_F8),
KEY(0xff, 4, KEY_F9),
KEY(0xff, 5, KEY_F10),
KEY(4, 5, KEY_RIGHTALT),
KEY(4, 6, KEY_LEFTSHIFT),
KEY(5, 0, KEY_Y),
KEY(6, 0, KEY_U),
KEY(7, 0, KEY_I),
KEY(7, 1, KEY_F7),
KEY(7, 2, KEY_F8),
KEY(0xff, 2, KEY_F9),
KEY(0xff, 4, KEY_F10),
KEY(0xff, 5, KEY_F11),
};
static struct matrix_keymap_data board_map_data = {
......
......@@ -143,6 +143,7 @@ static const struct xpad_device {
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
......@@ -209,6 +210,7 @@ static struct usb_device_id xpad_table [] = {
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */
{ }
};
......
......@@ -106,8 +106,8 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
struct input_dev *input;
int err;
if (!pdata || !pdata->steps) {
dev_err(&pdev->dev, "invalid platform data\n");
if (!pdata) {
dev_err(&pdev->dev, "missing platform data\n");
return -ENOENT;
}
......
......@@ -230,7 +230,7 @@ static int __devinit bbc_beep_probe(struct of_device *op, const struct of_device
return err;
}
static int bbc_remove(struct of_device *op)
static int __devexit bbc_remove(struct of_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct input_dev *input_dev = state->input_dev;
......@@ -308,7 +308,7 @@ static int __devinit grover_beep_probe(struct of_device *op, const struct of_dev
return err;
}
static int grover_remove(struct of_device *op)
static int __devexit grover_remove(struct of_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct grover_beep_info *info = &state->u.grover;
......
......@@ -934,6 +934,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
},
.driver_data = keymap_wistron_md2900
},
{
.callback = dmi_matched,
.ident = "Medion MD 42200",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
},
.driver_data = keymap_fs_amilo_pro_v2000
},
{
.callback = dmi_matched,
.ident = "Medion MD 96500",
......
......@@ -4,7 +4,7 @@
config SERIO
tristate "Serial I/O support" if EMBEDDED || !X86
default y
---help---
help
Say Yes here if you have any input device that uses serial I/O to
communicate with the system. This includes the
* standard AT keyboard and PS/2 mouse *
......@@ -22,7 +22,7 @@ config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
---help---
help
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
you'll need to say Y here.
......@@ -35,7 +35,7 @@ config SERIO_I8042
config SERIO_SERPORT
tristate "Serial port line discipline"
default y
---help---
help
Say Y here if you plan to use an input device (mouse, joystick,
tablet, 6dof) that communicates over the RS232 serial (COM) port.
......@@ -49,7 +49,7 @@ config SERIO_SERPORT
config SERIO_CT82C710
tristate "ct82c710 Aux port controller"
depends on X86
---help---
help
Say Y here if you have a Texas Instruments TravelMate notebook
equipped with the ct82c710 chip and want to use a mouse connected
to the "QuickPort".
......@@ -66,7 +66,7 @@ config SERIO_Q40KBD
config SERIO_PARKBD
tristate "Parallel port keyboard adapter"
depends on PARPORT
---help---
help
Say Y here if you built a simple parallel port adapter to attach
an additional AT keyboard, XT keyboard or PS/2 mouse.
......@@ -124,7 +124,7 @@ config HP_SDC
tristate "HP System Device Controller i8042 Support"
depends on (GSC || HP300) && SERIO
default y
---help---
help
This option enables support for the "System Device
Controller", an i8042 carrying microcode to manage a
few miscellaneous devices on some Hewlett Packard systems.
......@@ -168,6 +168,7 @@ config SERIO_MACEPS2
config SERIO_LIBPS2
tristate "PS/2 driver library" if EMBEDDED
depends on SERIO_I8042 || SERIO_I8042=n
help
Say Y here if you are using a driver for device connected
to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
......
......@@ -609,6 +609,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
str = i8042_read_status();
if (str & I8042_STR_OBF) {
data = i8042_read_data();
dbg("%02x <- i8042 (aux_test_irq, %s)",
data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
if (i8042_irq_being_tested &&
data == 0xa5 && (str & I8042_STR_AUXDATA))
complete(&i8042_aux_irq_delivered);
......@@ -750,6 +752,7 @@ static int __init i8042_check_aux(void)
* AUX IRQ was never delivered so we need to flush the controller to
* get rid of the byte we put there; otherwise keyboard may not work.
*/
dbg(" -- i8042 (aux irq test timeout)");
i8042_flush();
retval = -1;
}
......
......@@ -645,7 +645,7 @@ static int __devinit ad7879_probe(struct spi_device *spi)
kfree(ts);
}
return 0;
return error;
}
static int __devexit ad7879_remove(struct spi_device *spi)
......@@ -732,7 +732,7 @@ static int __devinit ad7879_probe(struct i2c_client *client,
kfree(ts);
}
return 0;
return error;
}
static int __devexit ad7879_remove(struct i2c_client *client)
......
......@@ -349,11 +349,11 @@ struct twl4030_madc_platform_data {
int irq_line;
};
/* Boards have uniqe mappings of {col, row} --> keycode.
* Column and row are 4 bits, but range only from 0..7.
/* Boards have uniqe mappings of {row, col} --> keycode.
* Column and row are 8 bits each, but range only from 0..7.
* a PERSISTENT_KEY is "always on" and never reported.
*/
#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_RESERVED)
#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
struct twl4030_keypad_data {
const struct matrix_keymap_data *keymap_data;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment