PCI: imx6: Add support for i.MX6 PCIe controller

Add support for the PCIe port present on the i.MX6 family of controllers.
These use the Synopsis Designware core tied to their own PHY.
Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation/devicetree/bindings/pci/designware-pcie.txt

@@ -3,7 +3,7 @@
 Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the
 	core, plus an identifier for the specific instance, such
-	as "samsung,exynos5440-pcie".
+	as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie".
 - reg: base addresses and lengths of the pcie controller,
 	the phy controller, additional register for the phy controller.
 - interrupts: interrupt values for level interrupt,
@@ -21,6 +21,11 @@ Required properties:
 - num-lanes: number of lanes to use
 - reset-gpio: gpio pin number of power good signal
 
+Optional properties for fsl,imx6q-pcie
+- power-on-gpio: gpio pin number of power-enable signal
+- wake-up-gpio: gpio pin number of incoming wakeup signal
+- disable-gpio: gpio pin number of outgoing rfkill/endpoint disable signal
+
 Example:
 
 SoC specific DT Entry:

drivers/pci/host/Kconfig

@@ -15,6 +15,12 @@ config PCI_EXYNOS
 	select PCIEPORTBUS
 	select PCIE_DW
 
+config PCI_IMX6
+	bool "Freescale i.MX6 PCIe controller"
+	depends on SOC_IMX6Q
+	select PCIEPORTBUS
+	select PCIE_DW
+
 config PCI_TEGRA
 	bool "NVIDIA Tegra PCIe controller"
 	depends on ARCH_TEGRA

drivers/pci/host/Makefile

 obj-$(CONFIG_PCIE_DW) += pcie-designware.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o