Commit bb49ca00 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Santosh Shilimkar

soc: ti: k3-ringacc: Use the ti_sci set_cfg callback for ring configuration

Switch to the new set_cfg to configure the ring.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
parent 3c201753
......@@ -365,20 +365,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_request_rings_pair);
static void k3_ringacc_ring_reset_sci(struct k3_ring *ring)
{
struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
struct k3_ringacc *ringacc = ring->parent;
int ret;
ret = ringacc->tisci_ring_ops->config(
ringacc->tisci,
TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID,
ringacc->tisci_dev_id,
ring->ring_id,
0,
0,
ring->size,
0,
0,
0);
ring_cfg.nav_id = ringacc->tisci_dev_id;
ring_cfg.index = ring->ring_id;
ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID;
ring_cfg.count = ring->size;
ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
if (ret)
dev_err(ringacc->dev, "TISCI reset ring fail (%d) ring_idx %d\n",
ret, ring->ring_id);
......@@ -398,20 +394,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset);
static void k3_ringacc_ring_reconfig_qmode_sci(struct k3_ring *ring,
enum k3_ring_mode mode)
{
struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
struct k3_ringacc *ringacc = ring->parent;
int ret;
ret = ringacc->tisci_ring_ops->config(
ringacc->tisci,
TI_SCI_MSG_VALUE_RM_RING_MODE_VALID,
ringacc->tisci_dev_id,
ring->ring_id,
0,
0,
0,
mode,
0,
0);
ring_cfg.nav_id = ringacc->tisci_dev_id;
ring_cfg.index = ring->ring_id;
ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_MODE_VALID;
ring_cfg.mode = mode;
ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
if (ret)
dev_err(ringacc->dev, "TISCI reconf qmode fail (%d) ring_idx %d\n",
ret, ring->ring_id);
......@@ -478,20 +470,15 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset_dma);
static void k3_ringacc_ring_free_sci(struct k3_ring *ring)
{
struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
struct k3_ringacc *ringacc = ring->parent;
int ret;
ret = ringacc->tisci_ring_ops->config(
ringacc->tisci,
TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
ringacc->tisci_dev_id,
ring->ring_id,
0,
0,
0,
0,
0,
0);
ring_cfg.nav_id = ringacc->tisci_dev_id;
ring_cfg.index = ring->ring_id;
ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
if (ret)
dev_err(ringacc->dev, "TISCI ring free fail (%d) ring_idx %d\n",
ret, ring->ring_id);
......@@ -575,28 +562,26 @@ EXPORT_SYMBOL_GPL(k3_ringacc_get_ring_irq_num);
static int k3_ringacc_ring_cfg_sci(struct k3_ring *ring)
{
struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
struct k3_ringacc *ringacc = ring->parent;
u32 ring_idx;
int ret;
if (!ringacc->tisci)
return -EINVAL;
ring_idx = ring->ring_id;
ret = ringacc->tisci_ring_ops->config(
ringacc->tisci,
TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
ringacc->tisci_dev_id,
ring_idx,
lower_32_bits(ring->ring_mem_dma),
upper_32_bits(ring->ring_mem_dma),
ring->size,
ring->mode,
ring->elm_size,
0);
ring_cfg.nav_id = ringacc->tisci_dev_id;
ring_cfg.index = ring->ring_id;
ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
ring_cfg.addr_lo = lower_32_bits(ring->ring_mem_dma);
ring_cfg.addr_hi = upper_32_bits(ring->ring_mem_dma);
ring_cfg.count = ring->size;
ring_cfg.mode = ring->mode;
ring_cfg.size = ring->elm_size;
ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
if (ret)
dev_err(ringacc->dev, "TISCI config ring fail (%d) ring_idx %d\n",
ret, ring_idx);
ret, ring->ring_id);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment