debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR

Interacting with the USB_PHY_TEST MMR through debugfs was causing wide-spread
chaos in the realm (kernel panic). Expunge all references to this demonic
register.
Signed-off-by: Andre Wolokita <Andre.Wolokita@analog.com>

arch/blackfin/kernel/debug-mmrs.c

@@ -1620,7 +1620,6 @@ static int __init bfin_debug_mmrs_init(void)
 	D16(USB_APHY_CNTRL);
 	D16(USB_APHY_CALIB);
 	D16(USB_APHY_CNTRL2);
-	D16(USB_PHY_TEST);
 	D16(USB_PLLOSC_CTRL);
 	D16(USB_SRP_CLKDIV);
 	D16(USB_EP_NI0_TXMAXP);

arch/blackfin/mach-bf527/include/mach/cdefBF525.h

@@ -122,11 +122,6 @@
 #define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
 #define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
-
 #define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
 #define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
 #define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)

arch/blackfin/mach-bf527/include/mach/defBF525.h

@@ -77,10 +77,6 @@
 
 #define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc039ec   /* Used for reducing simulation time and simplifies FIFO testability */
-
 #define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
 #define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
 

arch/blackfin/mach-bf548/include/mach/cdefBF542.h

@@ -241,10 +241,6 @@
 #define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
 #define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
 #define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
 #define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
 #define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)

arch/blackfin/mach-bf548/include/mach/cdefBF547.h

@@ -408,10 +408,6 @@
 #define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
 #define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
 #define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
 #define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
 #define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)

arch/blackfin/mach-bf548/include/mach/defBF542.h

@@ -140,9 +140,6 @@
 #define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
 #define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
 #define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
 #define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
 

arch/blackfin/mach-bf548/include/mach/defBF547.h

@@ -254,9 +254,6 @@
 #define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
 #define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
 
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
 #define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
 #define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */