Commit bb8b2062 authored by Zhao Qiang's avatar Zhao Qiang Committed by David S. Miller

fsl/qe: setup clock source for TDM mode

Add tdm clock configuration in both qe clock system and ucc
fast controller.
Signed-off-by: default avatarZhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 68f047e3
......@@ -25,6 +25,12 @@
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/ucc.h>
#define UCC_TDM_NUM 8
#define RX_SYNC_SHIFT_BASE 30
#define TX_SYNC_SHIFT_BASE 14
#define RX_CLK_SHIFT_BASE 28
#define TX_CLK_SHIFT_BASE 12
int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{
unsigned long flags;
......@@ -210,3 +216,447 @@ int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
return 0;
}
static int ucc_get_tdm_common_clk(u32 tdm_num, enum qe_clock clock)
{
int clock_bits = -EINVAL;
/*
* for TDM[0, 1, 2, 3], TX and RX use common
* clock source BRG3,4 and CLK1,2
* for TDM[4, 5, 6, 7], TX and RX use common
* clock source BRG12,13 and CLK23,24
*/
switch (tdm_num) {
case 0:
case 1:
case 2:
case 3:
switch (clock) {
case QE_BRG3:
clock_bits = 1;
break;
case QE_BRG4:
clock_bits = 2;
break;
case QE_CLK1:
clock_bits = 4;
break;
case QE_CLK2:
clock_bits = 5;
break;
default:
break;
}
break;
case 4:
case 5:
case 6:
case 7:
switch (clock) {
case QE_BRG12:
clock_bits = 1;
break;
case QE_BRG13:
clock_bits = 2;
break;
case QE_CLK23:
clock_bits = 4;
break;
case QE_CLK24:
clock_bits = 5;
break;
default:
break;
}
break;
default:
break;
}
return clock_bits;
}
static int ucc_get_tdm_rx_clk(u32 tdm_num, enum qe_clock clock)
{
int clock_bits = -EINVAL;
switch (tdm_num) {
case 0:
switch (clock) {
case QE_CLK3:
clock_bits = 6;
break;
case QE_CLK8:
clock_bits = 7;
break;
default:
break;
}
break;
case 1:
switch (clock) {
case QE_CLK5:
clock_bits = 6;
break;
case QE_CLK10:
clock_bits = 7;
break;
default:
break;
}
break;
case 2:
switch (clock) {
case QE_CLK7:
clock_bits = 6;
break;
case QE_CLK12:
clock_bits = 7;
break;
default:
break;
}
break;
case 3:
switch (clock) {
case QE_CLK9:
clock_bits = 6;
break;
case QE_CLK14:
clock_bits = 7;
break;
default:
break;
}
break;
case 4:
switch (clock) {
case QE_CLK11:
clock_bits = 6;
break;
case QE_CLK16:
clock_bits = 7;
break;
default:
break;
}
break;
case 5:
switch (clock) {
case QE_CLK13:
clock_bits = 6;
break;
case QE_CLK18:
clock_bits = 7;
break;
default:
break;
}
break;
case 6:
switch (clock) {
case QE_CLK15:
clock_bits = 6;
break;
case QE_CLK20:
clock_bits = 7;
break;
default:
break;
}
break;
case 7:
switch (clock) {
case QE_CLK17:
clock_bits = 6;
break;
case QE_CLK22:
clock_bits = 7;
break;
default:
break;
}
break;
}
return clock_bits;
}
static int ucc_get_tdm_tx_clk(u32 tdm_num, enum qe_clock clock)
{
int clock_bits = -EINVAL;
switch (tdm_num) {
case 0:
switch (clock) {
case QE_CLK4:
clock_bits = 6;
break;
case QE_CLK9:
clock_bits = 7;
break;
default:
break;
}
break;
case 1:
switch (clock) {
case QE_CLK6:
clock_bits = 6;
break;
case QE_CLK11:
clock_bits = 7;
break;
default:
break;
}
break;
case 2:
switch (clock) {
case QE_CLK8:
clock_bits = 6;
break;
case QE_CLK13:
clock_bits = 7;
break;
default:
break;
}
break;
case 3:
switch (clock) {
case QE_CLK10:
clock_bits = 6;
break;
case QE_CLK15:
clock_bits = 7;
break;
default:
break;
}
break;
case 4:
switch (clock) {
case QE_CLK12:
clock_bits = 6;
break;
case QE_CLK17:
clock_bits = 7;
break;
default:
break;
}
break;
case 5:
switch (clock) {
case QE_CLK14:
clock_bits = 6;
break;
case QE_CLK19:
clock_bits = 7;
break;
default:
break;
}
break;
case 6:
switch (clock) {
case QE_CLK16:
clock_bits = 6;
break;
case QE_CLK21:
clock_bits = 7;
break;
default:
break;
}
break;
case 7:
switch (clock) {
case QE_CLK18:
clock_bits = 6;
break;
case QE_CLK3:
clock_bits = 7;
break;
default:
break;
}
break;
}
return clock_bits;
}
/* tdm_num: TDM A-H port num is 0-7 */
static int ucc_get_tdm_rxtx_clk(enum comm_dir mode, u32 tdm_num,
enum qe_clock clock)
{
int clock_bits;
clock_bits = ucc_get_tdm_common_clk(tdm_num, clock);
if (clock_bits > 0)
return clock_bits;
if (mode == COMM_DIR_RX)
clock_bits = ucc_get_tdm_rx_clk(tdm_num, clock);
if (mode == COMM_DIR_TX)
clock_bits = ucc_get_tdm_tx_clk(tdm_num, clock);
return clock_bits;
}
static u32 ucc_get_tdm_clk_shift(enum comm_dir mode, u32 tdm_num)
{
u32 shift;
shift = (mode == COMM_DIR_RX) ? RX_CLK_SHIFT_BASE : TX_CLK_SHIFT_BASE;
if (tdm_num < 4)
shift -= tdm_num * 4;
else
shift -= (tdm_num - 4) * 4;
return shift;
}
int ucc_set_tdm_rxtx_clk(u32 tdm_num, enum qe_clock clock,
enum comm_dir mode)
{
int clock_bits;
u32 shift;
struct qe_mux __iomem *qe_mux_reg;
__be32 __iomem *cmxs1cr;
qe_mux_reg = &qe_immr->qmx;
if (tdm_num > 7 || tdm_num < 0)
return -EINVAL;
/* The communications direction must be RX or TX */
if (mode != COMM_DIR_RX && mode != COMM_DIR_TX)
return -EINVAL;
clock_bits = ucc_get_tdm_rxtx_clk(mode, tdm_num, clock);
if (clock_bits < 0)
return -EINVAL;
shift = ucc_get_tdm_clk_shift(mode, tdm_num);
cmxs1cr = (tdm_num < 4) ? &qe_mux_reg->cmxsi1cr_l :
&qe_mux_reg->cmxsi1cr_h;
qe_clrsetbits32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
clock_bits << shift);
return 0;
}
static int ucc_get_tdm_sync_source(u32 tdm_num, enum qe_clock clock,
enum comm_dir mode)
{
int source = -EINVAL;
if (mode == COMM_DIR_RX && clock == QE_RSYNC_PIN) {
source = 0;
return source;
}
if (mode == COMM_DIR_TX && clock == QE_TSYNC_PIN) {
source = 0;
return source;
}
switch (tdm_num) {
case 0:
case 1:
switch (clock) {
case QE_BRG9:
source = 1;
break;
case QE_BRG10:
source = 2;
break;
default:
break;
}
break;
case 2:
case 3:
switch (clock) {
case QE_BRG9:
source = 1;
break;
case QE_BRG11:
source = 2;
break;
default:
break;
}
break;
case 4:
case 5:
switch (clock) {
case QE_BRG13:
source = 1;
break;
case QE_BRG14:
source = 2;
break;
default:
break;
}
break;
case 6:
case 7:
switch (clock) {
case QE_BRG13:
source = 1;
break;
case QE_BRG15:
source = 2;
break;
default:
break;
}
break;
}
return source;
}
static u32 ucc_get_tdm_sync_shift(enum comm_dir mode, u32 tdm_num)
{
u32 shift;
shift = (mode == COMM_DIR_RX) ? RX_SYNC_SHIFT_BASE : RX_SYNC_SHIFT_BASE;
shift -= tdm_num * 2;
return shift;
}
int ucc_set_tdm_rxtx_sync(u32 tdm_num, enum qe_clock clock,
enum comm_dir mode)
{
int source;
u32 shift;
struct qe_mux *qe_mux_reg;
qe_mux_reg = &qe_immr->qmx;
if (tdm_num >= UCC_TDM_NUM)
return -EINVAL;
/* The communications direction must be RX or TX */
if (mode != COMM_DIR_RX && mode != COMM_DIR_TX)
return -EINVAL;
source = ucc_get_tdm_sync_source(tdm_num, clock, mode);
if (source < 0)
return -EINVAL;
shift = ucc_get_tdm_sync_shift(mode, tdm_num);
qe_clrsetbits32(&qe_mux_reg->cmxsi1syr,
QE_CMXUCR_TX_CLK_SRC_MASK << shift,
source << shift);
return 0;
}
......@@ -327,6 +327,42 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_fast_free(uccf);
return -EINVAL;
}
} else {
/* tdm Rx clock routing */
if ((uf_info->rx_clock != QE_CLK_NONE) &&
ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->rx_clock,
COMM_DIR_RX)) {
pr_err("%s: illegal value for RX clock", __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
/* tdm Tx clock routing */
if ((uf_info->tx_clock != QE_CLK_NONE) &&
ucc_set_tdm_rxtx_clk(uf_info->tdm_num, uf_info->tx_clock,
COMM_DIR_TX)) {
pr_err("%s: illegal value for TX clock", __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
/* tdm Rx sync clock routing */
if ((uf_info->rx_sync != QE_CLK_NONE) &&
ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->rx_sync,
COMM_DIR_RX)) {
pr_err("%s: illegal value for RX clock", __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
/* tdm Tx sync clock routing */
if ((uf_info->tx_sync != QE_CLK_NONE) &&
ucc_set_tdm_rxtx_sync(uf_info->tdm_num, uf_info->tx_sync,
COMM_DIR_TX)) {
pr_err("%s: illegal value for TX clock", __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
}
/* Set interrupt mask register at UCC level. */
......
......@@ -244,6 +244,22 @@ static inline int qe_alive_during_sleep(void)
#define qe_muram_addr cpm_muram_addr
#define qe_muram_offset cpm_muram_offset
#define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
#define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
#define qe_setbits16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
#define qe_clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
#define qe_setbits8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
#define qe_clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
#define qe_clrsetbits32(addr, clear, set) \
iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
#define qe_clrsetbits16(addr, clear, set) \
iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
#define qe_clrsetbits8(addr, clear, set) \
iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
/* Structure that defines QE firmware binary files.
*
* See Documentation/powerpc/qe_firmware.txt for a description of these
......
......@@ -41,6 +41,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
enum comm_dir mode);
int ucc_set_tdm_rxtx_clk(unsigned int tdm_num, enum qe_clock clock,
enum comm_dir mode);
int ucc_set_tdm_rxtx_sync(unsigned int tdm_num, enum qe_clock clock,
enum comm_dir mode);
int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
......
......@@ -118,6 +118,7 @@ enum ucc_fast_transparent_tcrc {
/* Fast UCC initialization structure */
struct ucc_fast_info {
int ucc_num;
int tdm_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
enum qe_clock rx_sync;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment