Commit bc046b95 authored by Michael Walle's avatar Michael Walle Committed by Shawn Guo

arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC

Use the proper voltages as supported by the board instead of the ones
supported by the PMIC. The voltages were taken from both the schematic
of the 8MNANOLPD4-EVK eval board and the datasheet of the IMX8MN SoC.
Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Reviewed-by: default avatarHeiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 1cfa1e68
......@@ -42,8 +42,8 @@ pmic: pmic@25 {
regulators {
buck1: BUCK1{
regulator-name = "VDD_SOC";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
......@@ -51,8 +51,8 @@ buck1: BUCK1{
buck2: BUCK2 {
regulator-name = "VDD_ARM_0V9";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
......@@ -62,32 +62,32 @@ buck2: BUCK2 {
buck4: BUCK4{
regulator-name = "VDD_3V3";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5{
regulator-name = "VDD_1V8";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
regulator-name = "NVCC_DRAM_1V1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
regulator-name = "NVCC_SNVS_1V8";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
......@@ -95,23 +95,23 @@ ldo1: LDO1 {
ldo2: LDO2 {
regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
regulator-name = "VDDA_1V8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-name = "VDD_PHY_1V2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment