Merge branch 'Offload-tc-vlan-mangle-to-mscc_ocelot-switch'

Vladimir Oltean says:

====================
Offload tc-vlan mangle to mscc_ocelot switch

This series offloads one more action to the VCAP IS1 ingress TCAM, which
is to change the classified VLAN for packets, according to the VCAP IS1
keys (VLAN, source MAC, source IP, EtherType, etc).
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mscc/ocelot.c

@@ -205,8 +205,21 @@ int ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
 	u32 val;
 
-	if (switchdev_trans_ph_prepare(trans))
+	if (switchdev_trans_ph_prepare(trans)) {
+		struct ocelot_vcap_block *block = &ocelot->block[VCAP_IS1];
+		struct ocelot_vcap_filter *filter;
+
+		list_for_each_entry(filter, &block->rules, list) {
+			if (filter->ingress_port_mask & BIT(port) &&
+			    filter->action.vid_replace_ena) {
+				dev_err(ocelot->dev,
+					"Cannot change VLAN state with vlan modify rules active\n");
+				return -EBUSY;
+			}
+		}
+
 		return 0;
+	}
 
 	ocelot_port->vlan_aware = vlan_aware;
 

drivers/net/ethernet/mscc/ocelot_flower.c

@@ -142,10 +142,11 @@ ocelot_find_vcap_filter_that_points_at(struct ocelot *ocelot, int chain)
 	return NULL;
 }
 
-static int ocelot_flower_parse_action(struct ocelot *ocelot, bool ingress,
-				      struct flow_cls_offload *f,
+static int ocelot_flower_parse_action(struct ocelot *ocelot, int port,
+				      bool ingress, struct flow_cls_offload *f,
 				      struct ocelot_vcap_filter *filter)
 {
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
 	struct netlink_ext_ack *extack = f->common.extack;
 	bool allow_missing_goto_target = false;
 	const struct flow_action_entry *a;
@@ -266,6 +267,28 @@ static int ocelot_flower_parse_action(struct ocelot *ocelot, bool ingress,
 			}
 			filter->type = OCELOT_VCAP_FILTER_OFFLOAD;
 			break;
+		case FLOW_ACTION_VLAN_MANGLE:
+			if (filter->block_id != VCAP_IS1) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "VLAN modify action can only be offloaded to VCAP IS1");
+				return -EOPNOTSUPP;
+			}
+			if (filter->goto_target != -1) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "Last action must be GOTO");
+				return -EOPNOTSUPP;
+			}
+			if (!ocelot_port->vlan_aware) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "Can only modify VLAN under VLAN aware bridge");
+				return -EOPNOTSUPP;
+			}
+			filter->action.vid_replace_ena = true;
+			filter->action.pcp_dei_ena = true;
+			filter->action.vid = a->vlan.vid;
+			filter->action.pcp = a->vlan.prio;
+			filter->type = OCELOT_VCAP_FILTER_OFFLOAD;
+			break;
 		case FLOW_ACTION_PRIORITY:
 			if (filter->block_id != VCAP_IS1) {
 				NL_SET_ERR_MSG_MOD(extack,
@@ -601,7 +624,7 @@ static int ocelot_flower_parse(struct ocelot *ocelot, int port, bool ingress,
 	filter->prio = f->common.prio;
 	filter->id = f->cookie;
 
-	ret = ocelot_flower_parse_action(ocelot, ingress, f, filter);
+	ret = ocelot_flower_parse_action(ocelot, port, ingress, f, filter);
 	if (ret)
 		return ret;
 

net/dsa/tag_ocelot.c

@@ -184,9 +184,14 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 				  struct net_device *netdev,
 				  struct packet_type *pt)
 {
+	struct dsa_port *cpu_dp = netdev->dsa_ptr;
+	struct dsa_switch *ds = cpu_dp->ds;
+	struct ocelot *ocelot = ds->priv;
 	u64 src_port, qos_class;
+	u64 vlan_tci, tag_type;
 	u8 *start = skb->data;
 	u8 *extraction;
+	u16 vlan_tpid;
 
 	/* Revert skb->data by the amount consumed by the DSA master,
 	 * so it points to the beginning of the frame.
@@ -214,6 +219,8 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 
 	packing(extraction, &src_port,  46, 43, OCELOT_TAG_LEN, UNPACK, 0);
 	packing(extraction, &qos_class, 19, 17, OCELOT_TAG_LEN, UNPACK, 0);
+	packing(extraction, &tag_type,  16, 16, OCELOT_TAG_LEN, UNPACK, 0);
+	packing(extraction, &vlan_tci,  15,  0, OCELOT_TAG_LEN, UNPACK, 0);
 
 	skb->dev = dsa_master_find_slave(netdev, 0, src_port);
 	if (!skb->dev)
@@ -228,6 +235,33 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 	skb->offload_fwd_mark = 1;
 	skb->priority = qos_class;
 
+	/* Ocelot switches copy frames unmodified to the CPU. However, it is
+	 * possible for the user to request a VLAN modification through
+	 * VCAP_IS1_ACT_VID_REPLACE_ENA. In this case, what will happen is that
+	 * the VLAN ID field from the Extraction Header gets updated, but the
+	 * 802.1Q header does not (the classified VLAN only becomes visible on
+	 * egress through the "port tag" of front-panel ports).
+	 * So, for traffic extracted by the CPU, we want to pick up the
+	 * classified VLAN and manually replace the existing 802.1Q header from
+	 * the packet with it, so that the operating system is always up to
+	 * date with the result of tc-vlan actions.
+	 * NOTE: In VLAN-unaware mode, we don't want to do that, we want the
+	 * frame to remain unmodified, because the classified VLAN is always
+	 * equal to the pvid of the ingress port and should not be used for
+	 * processing.
+	 */
+	vlan_tpid = tag_type ? ETH_P_8021AD : ETH_P_8021Q;
+
+	if (ocelot->ports[src_port]->vlan_aware &&
+	    eth_hdr(skb)->h_proto == htons(vlan_tpid)) {
+		u16 dummy_vlan_tci;
+
+		skb_push_rcsum(skb, ETH_HLEN);
+		__skb_vlan_pop(skb, &dummy_vlan_tci);
+		skb_pull_rcsum(skb, ETH_HLEN);
+		__vlan_hwaccel_put_tag(skb, htons(vlan_tpid), vlan_tci);
+	}
+
 	return skb;
 }
 

tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh

@@ -166,6 +166,9 @@ setup_prepare()
 	ip link add link $eth3 name $eth3.100 type vlan id 100
 	ip link set $eth3.100 up
 
+	ip link add link $eth3 name $eth3.200 type vlan id 200
+	ip link set $eth3.200 up
+
 	tc filter add dev $eth0 ingress chain $(IS1 1) pref 1 \
 		protocol 802.1Q flower skip_sw vlan_id 100 \
 		action vlan pop \
@@ -175,12 +178,12 @@ setup_prepare()
 		flower skip_sw indev $eth1 \
 		action vlan push protocol 802.1Q id 100
 
-	tc filter add dev $eth0 ingress chain $(IS1 0) \
+	tc filter add dev $eth0 ingress chain $(IS1 0) pref 2 \
 		protocol ipv4 flower skip_sw src_ip 10.1.1.2 \
 		action skbedit priority 7 \
 		action goto chain $(IS1 1)
 
-	tc filter add dev $eth0 ingress chain $(IS2 0 0) \
+	tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \
 		protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
 		action police rate 50mbit burst 64k \
 		action goto chain $(IS2 1 0)
@@ -188,6 +191,7 @@ setup_prepare()
 
 cleanup()
 {
+	ip link del $eth3.200
 	ip link del $eth3.100
 	tc qdisc del dev $eth0 clsact
 	ip link del br0
@@ -238,6 +242,44 @@ test_vlan_push()
 	tcpdump_cleanup
 }
 
+test_vlan_modify()
+{
+	printf "Testing VLAN modification..		"
+
+	ip link set br0 type bridge vlan_filtering 1
+	bridge vlan add dev $eth0 vid 200
+	bridge vlan add dev $eth0 vid 300
+	bridge vlan add dev $eth1 vid 300
+
+	tc filter add dev $eth0 ingress chain $(IS1 2) pref 3 \
+		protocol 802.1Q flower skip_sw vlan_id 200 \
+		action vlan modify id 300 \
+		action goto chain $(IS2 0 0)
+
+	tcpdump_start $eth2
+
+	$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop
+
+	if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+
+	tcpdump_cleanup
+
+	tc filter del dev $eth0 ingress chain $(IS1 2) pref 3
+
+	bridge vlan del dev $eth0 vid 200
+	bridge vlan del dev $eth0 vid 300
+	bridge vlan del dev $eth1 vid 300
+	ip link set br0 type bridge vlan_filtering 0
+}
+
 test_skbedit_priority()
 {
 	local num_pkts=100
@@ -262,6 +304,7 @@ trap cleanup EXIT
 ALL_TESTS="
 	test_vlan_pop
 	test_vlan_push
+	test_vlan_modify
 	test_skbedit_priority
 "