Commit bc18b4df authored by José Roberto de Souza's avatar José Roberto de Souza Committed by Rodrigo Vivi

drm/i915/psr/skl+: Print information about what caused a PSR exit

This will be helpful to debug what hardware is actually tracking
and causing PSR to exit.

BSpec: 7721

v4:
- Using _MMIO_TRANS2() in PSR_EVENT
- Cleaning events before printing
Signed-off-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-2-jose.souza@intel.com
parent 75cbec03
......@@ -4095,6 +4095,29 @@ enum {
#define EDP_PSR2_IDLE_FRAME_MASK 0xf
#define EDP_PSR2_IDLE_FRAME_SHIFT 0
#define _PSR_EVENT_TRANS_A 0x60848
#define _PSR_EVENT_TRANS_B 0x61848
#define _PSR_EVENT_TRANS_C 0x62848
#define _PSR_EVENT_TRANS_D 0x63848
#define _PSR_EVENT_TRANS_EDP 0x6F848
#define PSR_EVENT(trans) _MMIO_TRANS2(trans, _PSR_EVENT_TRANS_A)
#define PSR_EVENT_PSR2_WD_TIMER_EXPIRE (1 << 17)
#define PSR_EVENT_PSR2_DISABLED (1 << 16)
#define PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN (1 << 15)
#define PSR_EVENT_SU_CRC_FIFO_UNDERRUN (1 << 14)
#define PSR_EVENT_GRAPHICS_RESET (1 << 12)
#define PSR_EVENT_PCH_INTERRUPT (1 << 11)
#define PSR_EVENT_MEMORY_UP (1 << 10)
#define PSR_EVENT_FRONT_BUFFER_MODIFY (1 << 9)
#define PSR_EVENT_WD_TIMER_EXPIRE (1 << 8)
#define PSR_EVENT_PIPE_REGISTERS_UPDATE (1 << 6)
#define PSR_EVENT_REGISTER_UPDATE (1 << 5)
#define PSR_EVENT_HDCP_ENABLE (1 << 4)
#define PSR_EVENT_KVMR_SESSION_ENABLE (1 << 3)
#define PSR_EVENT_VBI_ENABLE (1 << 2)
#define PSR_EVENT_LPSP_MODE_EXIT (1 << 1)
#define PSR_EVENT_PSR_DISABLE (1 << 0)
#define EDP_PSR2_STATUS _MMIO(0x6f940)
#define EDP_PSR2_STATUS_STATE_MASK (0xf<<28)
#define EDP_PSR2_STATUS_STATE_SHIFT 28
......
......@@ -125,6 +125,43 @@ void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool debug)
I915_WRITE(EDP_PSR_IMR, ~mask);
}
static void psr_event_print(u32 val, bool psr2_enabled)
{
DRM_DEBUG_KMS("PSR exit events: 0x%x\n", val);
if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE)
DRM_DEBUG_KMS("\tPSR2 watchdog timer expired\n");
if ((val & PSR_EVENT_PSR2_DISABLED) && psr2_enabled)
DRM_DEBUG_KMS("\tPSR2 disabled\n");
if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN)
DRM_DEBUG_KMS("\tSU dirty FIFO underrun\n");
if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN)
DRM_DEBUG_KMS("\tSU CRC FIFO underrun\n");
if (val & PSR_EVENT_GRAPHICS_RESET)
DRM_DEBUG_KMS("\tGraphics reset\n");
if (val & PSR_EVENT_PCH_INTERRUPT)
DRM_DEBUG_KMS("\tPCH interrupt\n");
if (val & PSR_EVENT_MEMORY_UP)
DRM_DEBUG_KMS("\tMemory up\n");
if (val & PSR_EVENT_FRONT_BUFFER_MODIFY)
DRM_DEBUG_KMS("\tFront buffer modification\n");
if (val & PSR_EVENT_WD_TIMER_EXPIRE)
DRM_DEBUG_KMS("\tPSR watchdog timer expired\n");
if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE)
DRM_DEBUG_KMS("\tPIPE registers updated\n");
if (val & PSR_EVENT_REGISTER_UPDATE)
DRM_DEBUG_KMS("\tRegister updated\n");
if (val & PSR_EVENT_HDCP_ENABLE)
DRM_DEBUG_KMS("\tHDCP enabled\n");
if (val & PSR_EVENT_KVMR_SESSION_ENABLE)
DRM_DEBUG_KMS("\tKVMR session enabled\n");
if (val & PSR_EVENT_VBI_ENABLE)
DRM_DEBUG_KMS("\tVBI enabled\n");
if (val & PSR_EVENT_LPSP_MODE_EXIT)
DRM_DEBUG_KMS("\tLPSP mode exited\n");
if ((val & PSR_EVENT_PSR_DISABLE) && !psr2_enabled)
DRM_DEBUG_KMS("\tPSR disabled\n");
}
void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
{
u32 transcoders = BIT(TRANSCODER_EDP);
......@@ -152,6 +189,14 @@ void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
dev_priv->psr.last_exit = time_ns;
DRM_DEBUG_KMS("[transcoder %s] PSR exit completed\n",
transcoder_name(cpu_transcoder));
if (INTEL_GEN(dev_priv) >= 9) {
u32 val = I915_READ(PSR_EVENT(cpu_transcoder));
bool psr2_enabled = dev_priv->psr.psr2_enabled;
I915_WRITE(PSR_EVENT(cpu_transcoder), val);
psr_event_print(val, psr2_enabled);
}
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment