Commit bc66c9ab authored by Tim Huang's avatar Tim Huang Committed by Alex Deucher

drm/amd/pm: update SMU IP v13.0.4 msg interface header

Some of the unused messages that were used earlier in development have
been freed up as spare messages, no intended functional changes.
Signed-off-by: default avatarMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: default avatarTim Huang <tim.huang@amd.com>
Acked-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: default avatarYifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
parent 6295f1d8
......@@ -54,14 +54,14 @@
#define PPSMC_MSG_TestMessage 0x01 ///< To check if PMFW is alive and responding. Requirement specified by PMFW team
#define PPSMC_MSG_GetPmfwVersion 0x02 ///< Get PMFW version
#define PPSMC_MSG_GetDriverIfVersion 0x03 ///< Get PMFW_DRIVER_IF version
#define PPSMC_MSG_EnableGfxOff 0x04 ///< Enable GFXOFF
#define PPSMC_MSG_DisableGfxOff 0x05 ///< Disable GFXOFF
#define PPSMC_MSG_SPARE0 0x04 ///< SPARE
#define PPSMC_MSG_SPARE1 0x05 ///< SPARE
#define PPSMC_MSG_PowerDownVcn 0x06 ///< Power down VCN
#define PPSMC_MSG_PowerUpVcn 0x07 ///< Power up VCN; VCN is power gated by default
#define PPSMC_MSG_SetHardMinVcn 0x08 ///< For wireless display
#define PPSMC_MSG_SetSoftMinGfxclk 0x09 ///< Set SoftMin for GFXCLK, argument is frequency in MHz
#define PPSMC_MSG_ActiveProcessNotify 0x0A ///< Needs update
#define PPSMC_MSG_ForcePowerDownGfx 0x0B ///< Force power down GFX, i.e. enter GFXOFF
#define PPSMC_MSG_SPARE2 0x0A ///< SPARE
#define PPSMC_MSG_SPARE3 0x0B ///< SPARE
#define PPSMC_MSG_PrepareMp1ForUnload 0x0C ///< Prepare PMFW for GFX driver unload
#define PPSMC_MSG_SetDriverDramAddrHigh 0x0D ///< Set high 32 bits of DRAM address for Driver table transfer
#define PPSMC_MSG_SetDriverDramAddrLow 0x0E ///< Set low 32 bits of DRAM address for Driver table transfer
......@@ -73,8 +73,7 @@
#define PPSMC_MSG_SetSoftMinFclk 0x14 ///< Set hard min for FCLK
#define PPSMC_MSG_SetSoftMinVcn 0x15 ///< Set soft min for VCN clocks (VCLK and DCLK)
#define PPSMC_MSG_EnableGfxImu 0x16 ///< Needs update
#define PPSMC_MSG_EnableGfxImu 0x16 ///< Enable GFX IMU
#define PPSMC_MSG_GetGfxclkFrequency 0x17 ///< Get GFX clock frequency
#define PPSMC_MSG_GetFclkFrequency 0x18 ///< Get FCLK frequency
......@@ -102,8 +101,8 @@
#define PPSMC_MSG_SetHardMinIspxclkByFreq 0x2C ///< Set HardMin by frequency for ISPXCLK
#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN.UMSCH (aka VSCH) scheduler
#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN.UMSCH (aka VSCH) scheduler
#define PPSMC_Message_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis
#define PPSMC_Message_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn
#define PPSMC_MSG_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis
#define PPSMC_MSG_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn
#define PPSMC_Message_Count 0x31 ///< Total number of PPSMC messages
/** @}*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment