ARM: dts: sun4i: Provide default muxing for relevant controllers

The I2C's, MMC0 and EMAC controllers have only one muxing option in the
SoC. In such a case, we can just move the muxing into the DTSI, and remove
it from the DTS.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -125,8 +125,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -136,8 +134,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -166,8 +162,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

@@ -68,8 +68,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -79,8 +77,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -108,8 +104,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts

@@ -65,8 +65,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -80,14 +78,10 @@ axp209: pmic@34 {
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5306de4: touchscreen@38 {
@@ -127,8 +121,6 @@ button-1200 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -99,8 +99,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -110,8 +108,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -121,8 +117,6 @@ axp209: pmic@34 {
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
@@ -141,8 +135,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

@@ -99,8 +99,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -112,15 +110,11 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -154,8 +148,6 @@ button-800 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-gemei-g9.dts

@@ -89,8 +89,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -102,8 +100,6 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -143,8 +139,6 @@ button-1142 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -80,8 +80,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy0>;
 	status = "okay";
 };
@@ -106,8 +104,6 @@ phy0: ethernet-phy@0 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts

@@ -63,8 +63,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -78,8 +76,6 @@ axp209: pmic@34 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet1.dts

@@ -86,8 +86,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -99,8 +97,6 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -113,8 +109,6 @@ bma250@18 {
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5x: touchscreen@38 {
@@ -156,8 +150,6 @@ button-1200 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

@@ -72,8 +72,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -85,14 +83,10 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -146,8 +140,6 @@ button-1200 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts

@@ -222,8 +222,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -235,8 +233,6 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -249,8 +245,6 @@ bma250@18 {
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -304,8 +298,6 @@ button-1200 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts

@@ -94,8 +94,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -105,8 +103,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -135,8 +131,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -105,27 +105,19 @@ &emac_sram {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };
 
@@ -138,8 +130,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -70,8 +70,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -96,8 +94,6 @@ &ir0_rx_pins {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mk802.dts

@@ -71,8 +71,6 @@ &ehci1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mk802ii.dts

@@ -67,8 +67,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -82,8 +80,6 @@ axp209: pmic@34 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -98,8 +98,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -109,8 +107,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -124,8 +120,6 @@ axp209: pmic@34 {
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -144,8 +138,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -112,8 +112,6 @@ &ehci1 {
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -123,8 +121,6 @@ &emac_sram {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -142,8 +138,6 @@ phy1: ethernet-phy@1 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

@@ -83,8 +83,6 @@ &ehci0 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -96,15 +94,11 @@ axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	pixcir_ts@5c {
@@ -142,8 +136,6 @@ button-800 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -266,6 +266,8 @@ spi1: spi@1c06000 {
 			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
 			       <&dma SUN4I_DMA_DEDICATED 8>;
 			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -277,6 +279,8 @@ emac: ethernet@1c0b000 {
 			interrupts = <55>;
 			clocks = <&ccu CLK_AHB_EMAC>;
 			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
 			status = "disabled";
 		};
 
@@ -294,6 +298,8 @@ mmc0: mmc@1c0f000 {
 			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
 			clock-names = "ahb", "mmc";
 			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -812,6 +818,8 @@ i2c0: i2c@1c2ac00 {
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -822,6 +830,8 @@ i2c1: i2c@1c2b000 {
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -832,6 +842,8 @@ i2c2: i2c@1c2b400 {
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/sunxi-itead-core-common.dtsi

@@ -65,8 +65,6 @@ &ehci1 {
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -75,8 +73,6 @@ axp209: pmic@34 {
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };