Commit bccfaffb authored by Lukasz Majewski's avatar Lukasz Majewski Committed by Thierry Reding

display: panel: Add AUO g070vvn01 display support (800x480)

This commit adds support for AUO's 7.0" display.
Signed-off-by: default avatarLukasz Majewski <lukma@denx.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514190849.18723-1-lukma@denx.de
parent 6c259091
AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
Required properties:
- compatible: should be "auo,g070vvn01"
- backlight: phandle of the backlight device attached to the panel
- power-supply: single regulator to provide the supply voltage
Required nodes:
- port: Parallel port mapping to connect this display
This panel needs single power supply voltage. Its backlight is conntrolled
via PWM signal.
Example:
--------
Example device-tree definition when connected to iMX6Q based board
lcd_panel: lcd-panel {
compatible = "auo,g070vvn01";
backlight = <&backlight_lcd>;
power-supply = <&reg_display>;
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_display_out>;
};
};
};
......@@ -580,6 +580,34 @@ static const struct panel_desc auo_b133htn01 = {
},
};
static const struct display_timing auo_g070vvn01_timings = {
.pixelclock = { 33300000, 34209000, 45000000 },
.hactive = { 800, 800, 800 },
.hfront_porch = { 20, 40, 200 },
.hback_porch = { 87, 40, 1 },
.hsync_len = { 1, 48, 87 },
.vactive = { 480, 480, 480 },
.vfront_porch = { 5, 13, 200 },
.vback_porch = { 31, 31, 29 },
.vsync_len = { 1, 1, 3 },
};
static const struct panel_desc auo_g070vvn01 = {
.timings = &auo_g070vvn01_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 152,
.height = 91,
},
.delay = {
.prepare = 200,
.enable = 50,
.disable = 50,
.unprepare = 1000,
},
};
static const struct drm_display_mode auo_g104sn02_mode = {
.clock = 40000,
.hdisplay = 800,
......@@ -2117,6 +2145,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b133xtn01",
.data = &auo_b133xtn01,
}, {
.compatible = "auo,g070vvn01",
.data = &auo_g070vvn01,
}, {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment