Skip to content

L
linux
Commit bcec20fd authored by Yakir Yang's avatar Yakir Yang
1 Browse files
Options

drm: bridge: analogix/dp: add some rk3288 special registers setting 

RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Tested-by: default avatarCaesar Wang <wxt@rock-chips.com>
Tested-by: default avatarDouglas Anderson <dianders@chromium.org>
Tested-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarYakir Yang <ykk@rock-chips.com>
parent be91c362
Show whitespace changes
Inline Side-by-side
Showing with 60 additions and 28 deletions
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
View file @ bcec20fd
......@@ -15,6 +15,8 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <drm/bridge/analogix_dp.h>
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
......@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
}
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
......@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
bool enable)
{
u32 reg;
u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH2_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH3_BLOCK:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH3_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH3_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case ANALOG_TOTAL:
if (enable) {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg |= DP_PHY_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~DP_PHY_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case POWER_ALL:
if (enable) {
reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
CH1_PD | CH0_PD;
writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(reg, dp->reg_base + phy_pd_addr);
} else {
writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
writel(0x00, dp->reg_base + phy_pd_addr);
}
break;
default:
......@@ -399,7 +413,13 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
analogix_dp_reset_aux(dp);
/* Disable AUX transaction H/W retry */
reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
AUX_HW_RETRY_COUNT_SEL(3) |
AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
else
reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) |
AUX_HW_RETRY_COUNT_SEL(0) |
AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
......
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
View file @ bcec20fd
......@@ -22,6 +22,14 @@
#define ANALOGIX_DP_VIDEO_CTL_8 0x3C
#define ANALOGIX_DP_VIDEO_CTL_10 0x44
#define ANALOGIX_DP_PLL_REG_1 0xfc
#define ANALOGIX_DP_PLL_REG_2 0x9e4
#define ANALOGIX_DP_PLL_REG_3 0x9e8
#define ANALOGIX_DP_PLL_REG_4 0x9ec
#define ANALOGIX_DP_PLL_REG_5 0xa00
#define ANALOGIX_DP_PD 0x12c
#define ANALOGIX_DP_LANE_MAP 0x35C
#define ANALOGIX_DP_ANALOG_CTL_1 0x370
......@@ -154,6 +162,10 @@
#define VSYNC_POLARITY_CFG (0x1 << 1)
#define HSYNC_POLARITY_CFG (0x1 << 0)
/* ANALOGIX_DP_PLL_REG_1 */
#define REF_CLK_24M (0x1 << 1)
#define REF_CLK_27M (0x0 << 1)
/* ANALOGIX_DP_LANE_MAP */
#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7