Commit bd452e6f authored by Jean Delvare's avatar Jean Delvare Committed by Greg Kroah-Hartman

hwmon: Fix debug messages in w83781d

Fix debug messages in w83781d at detection time. We can't use dev_dbg()
on an i2c client's device before calling i2c_attach_client() on that
client.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent e693810c
......@@ -1099,7 +1099,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
bank. */
if (kind < 0) {
if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
dev_dbg(dev, "Detection failed at step 3\n");
dev_dbg(&adapter->dev, "Detection of w83781d chip "
"failed at step 3\n");
err = -ENODEV;
goto ERROR2;
}
......@@ -1109,7 +1110,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
if ((!(val1 & 0x07)) &&
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
|| ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
dev_dbg(dev, "Detection failed at step 4\n");
dev_dbg(&adapter->dev, "Detection of w83781d chip "
"failed at step 4\n");
err = -ENODEV;
goto ERROR2;
}
......@@ -1119,7 +1121,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
((val1 & 0x80) && (val2 == 0x5c)))) {
if (w83781d_read_value
(client, W83781D_REG_I2C_ADDR) != address) {
dev_dbg(dev, "Detection failed at step 5\n");
dev_dbg(&adapter->dev, "Detection of w83781d "
"chip failed at step 5\n");
err = -ENODEV;
goto ERROR2;
}
......@@ -1141,8 +1144,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
else if (val2 == 0x12)
vendid = asus;
else {
dev_dbg(dev, "Chip was made by neither "
"Winbond nor Asus?\n");
dev_dbg(&adapter->dev, "w83781d chip vendor is "
"neither Winbond nor Asus\n");
err = -ENODEV;
goto ERROR2;
}
......@@ -1161,10 +1164,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
kind = as99127f;
else {
if (kind == 0)
dev_warn(dev, "Ignoring 'force' "
dev_warn(&adapter->dev, "Ignoring 'force' "
"parameter for unknown chip at "
"adapter %d, address 0x%02x\n",
i2c_adapter_id(adapter), address);
"address 0x%02x\n", address);
err = -EINVAL;
goto ERROR2;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment