ata: pata_parport: Fix friq module code indentation and style

Fix the header, indentation and coding style in the friq pata parport
protocol module to suppress warnings from smatch and other static code
analyzers.

No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

drivers/ata/pata_parport/friq.c

-/* 
-	friq.c	(c) 1998    Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License
-
-	friq.c is a low-level protocol driver for the Freecom "IQ"
-	parallel port IDE adapter.   Early versions of this adapter
-	use the 'frpw' protocol.
-	
-	Freecom uses this adapter in a battery powered external 
-	CD-ROM drive.  It is also used in LS-120 drives by
-	Maxell and Panasonic, and other devices.
-
-	The battery powered drive requires software support to
-	control the power to the drive.  This module enables the
-	drive power when the high level driver (pcd) is loaded
-	and disables it when the module is unloaded.  Note, if
-	the friq module is built in to the kernel, the power
-	will never be switched off, so other means should be
-	used to conserve battery power.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998    Grant R. Guenther <grant@torque.net>
+ *
+ * friq.c is a low-level protocol driver for the Freecom "IQ"
+ * parallel port IDE adapter.   Early versions of this adapter
+ * use the 'frpw' protocol.
+ *
+ * Freecom uses this adapter in a battery powered external
+ * CD-ROM drive.  It is also used in LS-120 drives by
+ * Maxell and Panasonic, and other devices.
+ *
+ * The battery powered drive requires software support to
+ * control the power to the drive.  This module enables the
+ * drive power when the high level driver (pcd) is loaded
+ * and disables it when the module is unloaded.  Note, if
+ * the friq module is built in to the kernel, the power
+ * will never be switched off, so other means should be
+ * used to conserve battery power.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,197 +28,206 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define CMD(x)		w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
-			w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+#define CMD(x)							\
+	do {							\
+		w2(4); w0(0xff); w0(0xff); w0(0x73); w0(0x73);	\
+		w0(0xc9); w0(0xc9); w0(0x26);			\
+		w0(0x26); w0(x); w0(x);				\
+	} while (0)
 
-#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+#define j44(l, h)	(((l >> 4) & 0x0f) | (h & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x08, 0x10 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x08, 0x10 };
 
 static int friq_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int	h,l,r;
+{
+	int h, l, r;
 
 	r = regr + cont_map[cont];
 
 	CMD(r);
 	w2(6); l = r1();
 	w2(4); h = r1();
-	w2(4); 
-
-	return j44(l,h);
+	w2(4);
 
+	return j44(l, h);
 }
 
 static void friq_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-        r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	CMD(r);
 	w0(val);
-	w2(5);w2(7);w2(5);w2(4);
+	w2(5); w2(7); w2(5); w2(4);
 }
 
 static void friq_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
+{
+	int h, l, k, ph;
 
-{       int     h, l, k, ph;
-
-        switch(pi->mode) {
-
-        case 0: CMD(regr); 
-                for (k=0;k<count;k++) {
-                        w2(6); l = r1();
-                        w2(4); h = r1();
-                        buf[k] = j44(l,h);
-                }
-                w2(4);
-                break;
-
-        case 1: ph = 2;
-                CMD(regr+0xc0); 
-                w0(0xff);
-                for (k=0;k<count;k++) {
-                        w2(0xa4 + ph); 
-                        buf[k] = r0();
-                        ph = 2 - ph;
-                } 
-                w2(0xac); w2(0xa4); w2(4);
-                break;
-
-	case 2: CMD(regr+0x80);
-		for (k=0;k<count-2;k++) buf[k] = r4();
+	switch (pi->mode) {
+	case 0:
+		CMD(regr);
+		for (k = 0; k < count; k++) {
+			w2(6); l = r1();
+			w2(4); h = r1();
+			buf[k] = j44(l, h);
+		}
+		w2(4);
+		break;
+	case 1:
+		ph = 2;
+		CMD(regr + 0xc0);
+		w0(0xff);
+		for (k = 0; k < count; k++) {
+			w2(0xa4 + ph);
+			buf[k] = r0();
+			ph = 2 - ph;
+		}
+		w2(0xac); w2(0xa4); w2(4);
+		break;
+	case 2:
+		CMD(regr + 0x80);
+		for (k = 0; k < count - 2; k++)
+			buf[k] = r4();
 		w2(0xac); w2(0xa4);
-		buf[count-2] = r4();
-		buf[count-1] = r4();
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
 		w2(4);
 		break;
-
-	case 3: CMD(regr+0x80);
-                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-	case 4: CMD(regr+0x80);
-                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-                buf[count-4] = r4();
-                buf[count-3] = r4();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-        }
+	case 3:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	case 4:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		buf[count - 4] = r4();
+		buf[count - 3] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	}
 }
 
 static void friq_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	friq_read_block_int(pi,buf,count,0x08);
+{
+	friq_read_block_int(pi, buf, count, 0x08);
 }
 
 static void friq_write_block(struct pi_adapter *pi, char *buf, int count)
- 
-{	int	k;
-
-	switch(pi->mode) {
+{
+	int k;
 
+	switch (pi->mode) {
 	case 0:
-	case 1: CMD(8); w2(5);
-        	for (k=0;k<count;k++) {
+	case 1:
+		CMD(8); w2(5);
+		for (k = 0; k < count; k++) {
 			w0(buf[k]);
-			w2(7);w2(5);
+			w2(7); w2(5);
 		}
 		w2(4);
 		break;
-
-	case 2: CMD(0xc8); w2(5);
-		for (k=0;k<count;k++) w4(buf[k]);
+	case 2:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		w2(4);
+		break;
+	case 3:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
+	case 4:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
 		w2(4);
 		break;
-
-        case 3: CMD(0xc8); w2(5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(4);
-                break;
-
-        case 4: CMD(0xc8); w2(5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(4);
-                break;
-	}
+}
 }
 
 static void friq_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(4);
 }
 
 static void friq_disconnect(struct pi_adapter *pi)
-
-{       CMD(0x20);
+{
+	CMD(0x20);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static int friq_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, r;
-	int	e[2] = {0,0};
+{
+	int j, k, r;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-	pi->saved_r0 = r0();	
+	pi->saved_r0 = r0();
 	w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
 	udelay(500);
 	w0(pi->saved_r0);
 
 	friq_connect(pi);
-	for (j=0;j<2;j++) {
-                friq_write_regr(pi,0,6,0xa0+j*0x10);
-                for (k=0;k<256;k++) {
-                        friq_write_regr(pi,0,2,k^0xaa);
-                        friq_write_regr(pi,0,3,k^0x55);
-                        if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
-                        }
-                }
+	for (j = 0; j < 2; j++) {
+		friq_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			friq_write_regr(pi, 0, 2, k ^ 0xaa);
+			friq_write_regr(pi, 0, 3, k ^ 0x55);
+			if (friq_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
 	friq_disconnect(pi);
 
 	friq_connect(pi);
-        friq_read_block_int(pi,scratch,512,0x10);
-        r = 0;
-        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	friq_read_block_int(pi, scratch, 512, 0x10);
+	r = 0;
+	for (k = 0; k < 128; k++) {
+		if (scratch[k] != k)
+			r++;
+	}
 	friq_disconnect(pi);
 
-	dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, e[0], e[1], r);
+	dev_dbg(&pi->dev,
+		"friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+		pi->port, pi->mode, e[0], e[1], r);
 
-        return (r || (e[0] && e[1]));
+	return r || (e[0] && e[1]);
 }
 
-
 static void friq_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[6] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32"};
 
-{       char    *mode_string[6] = {"4-bit","8-bit",
-				   "EPP-8","EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 
 	pi->private = 1;
 	friq_connect(pi);
 	CMD(0x9e);  		/* disable sleep timer */
 	friq_disconnect(pi);
-
 }
 
 static void friq_release_proto(struct pi_adapter *pi)