remoteproc: debug: add resource table dump feature

This patch adds the capability to display the content of
the resource table associated to a remote processor firmware.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

drivers/remoteproc/remoteproc_debugfs.c

@@ -155,6 +155,103 @@ static const struct file_operations rproc_recovery_ops = {
 	.llseek = generic_file_llseek,
 };
 
+/* Expose resource table content via debugfs */
+static int rproc_rsc_table_show(struct seq_file *seq, void *p)
+{
+	static const char * const types[] = {"carveout", "devmem", "trace", "vdev"};
+	struct rproc *rproc = seq->private;
+	struct resource_table *table = rproc->table_ptr;
+	struct fw_rsc_carveout *c;
+	struct fw_rsc_devmem *d;
+	struct fw_rsc_trace *t;
+	struct fw_rsc_vdev *v;
+	int i, j;
+
+	if (!table) {
+		seq_puts(seq, "No resource table found\n");
+		return 0;
+	}
+
+	for (i = 0; i < table->num; i++) {
+		int offset = table->offset[i];
+		struct fw_rsc_hdr *hdr = (void *)table + offset;
+		void *rsc = (void *)hdr + sizeof(*hdr);
+
+		switch (hdr->type) {
+		case RSC_CARVEOUT:
+			c = rsc;
+			seq_printf(seq, "Entry %d is of type %s\n", i, types[hdr->type]);
+			seq_printf(seq, "  Device Address 0x%x\n", c->da);
+			seq_printf(seq, "  Physical Address 0x%x\n", c->pa);
+			seq_printf(seq, "  Length 0x%x Bytes\n", c->len);
+			seq_printf(seq, "  Flags 0x%x\n", c->flags);
+			seq_printf(seq, "  Reserved (should be zero) [%d]\n", c->reserved);
+			seq_printf(seq, "  Name %s\n\n", c->name);
+			break;
+		case RSC_DEVMEM:
+			d = rsc;
+			seq_printf(seq, "Entry %d is of type %s\n", i, types[hdr->type]);
+			seq_printf(seq, "  Device Address 0x%x\n", d->da);
+			seq_printf(seq, "  Physical Address 0x%x\n", d->pa);
+			seq_printf(seq, "  Length 0x%x Bytes\n", d->len);
+			seq_printf(seq, "  Flags 0x%x\n", d->flags);
+			seq_printf(seq, "  Reserved (should be zero) [%d]\n", d->reserved);
+			seq_printf(seq, "  Name %s\n\n", d->name);
+			break;
+		case RSC_TRACE:
+			t = rsc;
+			seq_printf(seq, "Entry %d is of type %s\n", i, types[hdr->type]);
+			seq_printf(seq, "  Device Address 0x%x\n", t->da);
+			seq_printf(seq, "  Length 0x%x Bytes\n", t->len);
+			seq_printf(seq, "  Reserved (should be zero) [%d]\n", t->reserved);
+			seq_printf(seq, "  Name %s\n\n", t->name);
+			break;
+		case RSC_VDEV:
+			v = rsc;
+			seq_printf(seq, "Entry %d is of type %s\n", i, types[hdr->type]);
+
+			seq_printf(seq, "  ID %d\n", v->id);
+			seq_printf(seq, "  Notify ID %d\n", v->notifyid);
+			seq_printf(seq, "  Device features 0x%x\n", v->dfeatures);
+			seq_printf(seq, "  Guest features 0x%x\n", v->gfeatures);
+			seq_printf(seq, "  Config length 0x%x\n", v->config_len);
+			seq_printf(seq, "  Status 0x%x\n", v->status);
+			seq_printf(seq, "  Number of vrings %d\n", v->num_of_vrings);
+			seq_printf(seq, "  Reserved (should be zero) [%d][%d]\n\n",
+				   v->reserved[0], v->reserved[1]);
+
+			for (j = 0; j < v->num_of_vrings; j++) {
+				seq_printf(seq, "  Vring %d\n", j);
+				seq_printf(seq, "    Device Address 0x%x\n", v->vring[j].da);
+				seq_printf(seq, "    Alignment %d\n", v->vring[j].align);
+				seq_printf(seq, "    Number of buffers %d\n", v->vring[j].num);
+				seq_printf(seq, "    Notify ID %d\n", v->vring[j].notifyid);
+				seq_printf(seq, "    Physical Address 0x%x\n\n",
+					   v->vring[j].pa);
+			}
+			break;
+		default:
+			seq_printf(seq, "Unknown resource type found: %d [hdr: %p]\n",
+				   hdr->type, hdr);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int rproc_rsc_table_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rproc_rsc_table_show, inode->i_private);
+}
+
+static const struct file_operations rproc_rsc_table_ops = {
+	.open		= rproc_rsc_table_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 void rproc_remove_trace_file(struct dentry *tfile)
 {
 	debugfs_remove(tfile);
@@ -198,6 +295,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
 			    rproc, &rproc_name_ops);
 	debugfs_create_file("recovery", 0400, rproc->dbg_dir,
 			    rproc, &rproc_recovery_ops);
+	debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
+			    rproc, &rproc_rsc_table_ops);
 }
 
 void __init rproc_init_debugfs(void)