nfit: move to nfit/ sub-directory

With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file.  Prepare for this by moving all
nfit source to drivers/acpi/nfit/.  This is pure code movement, no
functional changes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/acpi/Kconfig

@@ -447,32 +447,7 @@ config ACPI_REDUCED_HARDWARE_ONLY
 
 	  If you are unsure what to do, do not enable this option.
 
-config ACPI_NFIT
-	tristate "ACPI NVDIMM Firmware Interface Table (NFIT)"
-	depends on PHYS_ADDR_T_64BIT
-	depends on BLK_DEV
-	depends on ARCH_HAS_MMIO_FLUSH
-	select LIBNVDIMM
-	help
-	  Infrastructure to probe ACPI 6 compliant platforms for
-	  NVDIMMs (NFIT) and register a libnvdimm device tree.  In
-	  addition to storage devices this also enables libnvdimm to pass
-	  ACPI._DSM messages for platform/dimm configuration.
-
-	  To compile this driver as a module, choose M here:
-	  the module will be called nfit.
-
-config ACPI_NFIT_DEBUG
-	bool "NFIT DSM debug"
-	depends on ACPI_NFIT
-	depends on DYNAMIC_DEBUG
-	default n
-	help
-	  Enabling this option causes the nfit driver to dump the
-	  input and output buffers of _DSM operations on the ACPI0012
-	  device and its children.  This can be very verbose, so leave
-	  it disabled unless you are debugging a hardware / firmware
-	  issue.
+source "drivers/acpi/nfit/Kconfig"
 
 source "drivers/acpi/apei/Kconfig"
 

drivers/acpi/Makefile

@@ -70,7 +70,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
 obj-$(CONFIG_ACPI)		+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
-obj-$(CONFIG_ACPI_NFIT)		+= nfit.o
+obj-$(CONFIG_ACPI_NFIT)		+= nfit/
 obj-$(CONFIG_ACPI)		+= acpi_memhotplug.o
 obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
 obj-$(CONFIG_ACPI_BATTERY)	+= battery.o

drivers/acpi/nfit/Kconfig

+config ACPI_NFIT
+	tristate "ACPI NVDIMM Firmware Interface Table (NFIT)"
+	depends on PHYS_ADDR_T_64BIT
+	depends on BLK_DEV
+	depends on ARCH_HAS_MMIO_FLUSH
+	select LIBNVDIMM
+	help
+	  Infrastructure to probe ACPI 6 compliant platforms for
+	  NVDIMMs (NFIT) and register a libnvdimm device tree.  In
+	  addition to storage devices this also enables libnvdimm to pass
+	  ACPI._DSM messages for platform/dimm configuration.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called nfit.
+
+config ACPI_NFIT_DEBUG
+	bool "NFIT DSM debug"
+	depends on ACPI_NFIT
+	depends on DYNAMIC_DEBUG
+	default n
+	help
+	  Enabling this option causes the nfit driver to dump the
+	  input and output buffers of _DSM operations on the ACPI0012
+	  device and its children.  This can be very verbose, so leave
+	  it disabled unless you are debugging a hardware / firmware
+	  issue.

drivers/acpi/nfit/Makefile

+obj-$(CONFIG_ACPI_NFIT) := nfit.o
+nfit-y := core.o

tools/testing/nvdimm/Kbuild

@@ -16,7 +16,7 @@ ldflags-y += --wrap=remove_resource
 
 DRIVERS := ../../../drivers
 NVDIMM_SRC := $(DRIVERS)/nvdimm
-ACPI_SRC := $(DRIVERS)/acpi
+ACPI_SRC := $(DRIVERS)/acpi/nfit
 DAX_SRC := $(DRIVERS)/dax
 ccflags-y := -I$(src)/$(NVDIMM_SRC)/
 
@@ -29,7 +29,7 @@ obj-$(CONFIG_ACPI_NFIT) += nfit.o
 obj-$(CONFIG_DEV_DAX) += dax.o
 obj-$(CONFIG_DEV_DAX_PMEM) += dax_pmem.o
 
-nfit-y := $(ACPI_SRC)/nfit.o
+nfit-y := $(ACPI_SRC)/core.o
 nfit-y += config_check.o
 
 nd_pmem-y := $(NVDIMM_SRC)/pmem.o

tools/testing/nvdimm/test/Kbuild

 ccflags-y := -I$(src)/../../../../drivers/nvdimm/
-ccflags-y += -I$(src)/../../../../drivers/acpi/
+ccflags-y += -I$(src)/../../../../drivers/acpi/nfit/
 
 obj-m += nfit_test.o
 obj-m += nfit_test_iomap.o