Merge tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux into next/dt

This pull request contains Device Tree changes for Broadcom ARM-based SoCs:

- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
  for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
  and the Sparrow board DTS file

- Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
  production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
  one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS

- Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
  and devices

- Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
  Gigabit MAC controllers and the Switch Register Access block, and finally updates the
  SmartRG SR-400AC board with its switch port layout

* tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
  ARM: dts: BCM5301X: Add SRAB interrupts
  ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
  ARM: dts: NSP: Add PL330 support
  ARM: dts: NSP: Add XMC board support
  ARM: dts: bcm23550: Add device tree files
  Documentation: devicetree: Document BCM23550 bindings
  ARM: BCM5301X: Enable SPI-NOR on dual flash devices
  ARM: dts: NSP: Add new DT file for bcm958625hr
  ARM: dts: NSP: modify second CPU address
  ARM: dts: NSP: Add MSI support on PCI
  ARM: BCM: modify Broadcom CPU enable method
  ARM: dts: fix use of bcm11351 enable method
  Documentation: Binding docs for bcm11351 enable method
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt

@@ -5,7 +5,7 @@ CPUs in the following Broadcom SoCs:
   BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
 
 The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the "cpu" device tree node:
   - enable-method = "brcm,bcm11351-cpu-method";
   - secondary-boot-reg = <...>;
 
@@ -19,8 +19,6 @@ Example:
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -32,5 +30,7 @@ Example:
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
 		};
 	};

Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt

+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM23550
+
+The enable method is specified by defining the following required
+properties in the "cpu" device tree node:
+  - enable-method = "brcm,bcm23550";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x3500417c>;
+		};
+	};

Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt

+Broadcom BCM23550 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM23550
+SoC.
+
+Required root node property:
+  - compatible: brcm,bcm23550
+
+Example:
+	/ {
+		model = "BCM23550 SoC";
+		compatible = "brcm,bcm23550";
+		[...]
+	}

Documentation/devicetree/bindings/arm/cpus.txt

@@ -193,6 +193,8 @@ nodes to be present and contain the properties described below.
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
 			    "arm,realview-smp"
+			    "brcm,bcm11351-cpu-method"
+			    "brcm,bcm23550"
 			    "brcm,bcm-nsp-smp"
 			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"

arch/arm/boot/dts/Makefile

@@ -96,8 +96,11 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 	bcm958305k.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
 	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
 dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958525xmc.dtb \
+	bcm958625hr.dtb \
 	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -57,7 +57,7 @@ cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff042c>;
+			secondary-boot-reg = <0xffff0fec>;
 			reg = <0x1>;
 		};
 	};
@@ -192,6 +192,23 @@ uart1: serial@0400 {
 			status = "disabled";
 		};
 
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -290,6 +307,18 @@ pcie0: pcie@18012000 {
 		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+				     <GIC_SPI 128 IRQ_TYPE_NONE>,
+				     <GIC_SPI 129 IRQ_TYPE_NONE>,
+				     <GIC_SPI 130 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 
 	pcie1: pcie@18013000 {
@@ -314,6 +343,18 @@ pcie1: pcie@18013000 {
 		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi@18013000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
+				     <GIC_SPI 134 IRQ_TYPE_NONE>,
+				     <GIC_SPI 135 IRQ_TYPE_NONE>,
+				     <GIC_SPI 136 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 
 	pcie2: pcie@18014000 {
@@ -338,5 +379,17 @@ pcie2: pcie@18014000 {
 		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi@18014000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
+				     <GIC_SPI 140 IRQ_TYPE_NONE>,
+				     <GIC_SPI 141 IRQ_TYPE_NONE>,
+				     <GIC_SPI 142 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 };

arch/arm/boot/dts/bcm11351.dtsi

@@ -30,7 +30,6 @@ chosen {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -41,6 +40,7 @@ cpu0: cpu@0 {
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
 			secondary-boot-reg = <0x3500417c>;
 			reg = <1>;
 		};

arch/arm/boot/dts/bcm21664.dtsi

@@ -30,7 +30,6 @@ chosen {
        cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -41,6 +40,7 @@ cpu0: cpu@0 {
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
 			secondary-boot-reg = <0x35004178>;
 			reg = <1>;
 		};

arch/arm/boot/dts/bcm23550-sparrow.dts

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -147,3 +147,7 @@ &usb2 {
 &usb3 {
 	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 };
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -90,3 +90,7 @@ &uart0 {
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -82,3 +82,7 @@ restart {
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts

@@ -126,3 +126,43 @@ &uart0 {
 &spi_nor {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};

arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts

@@ -131,3 +131,7 @@ eject {
 &usb2 {
 	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -113,3 +113,7 @@ &uart0 {
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm5301x.dtsi

@@ -153,6 +153,21 @@ axi@18000000 {
 			/* ChipCommon */
 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
 			/* PCIe Controller 0 */
 			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
@@ -239,6 +254,22 @@ spi_nor: spi-nor@0 {
 				status = "disabled";
 			};
 		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
 	};
 
 	lcpll0: lcpll0@1800c100 {
@@ -260,6 +291,17 @@ genpll: genpll@1800c140 {
 				     "sata2";
 	};
 
+	srab: srab@18007000 {
+		compatible = "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		/* ports are defined in board DTS */
+	};
+
 	nand: nand@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;

arch/arm/boot/dts/bcm958525xmc.dts

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};

arch/arm/boot/dts/bcm958625hr.dts

+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};

arch/arm/mach-bcm/platsmp.c

@@ -37,9 +37,6 @@
 #define OF_SECONDARY_BOOT	"secondary-boot-reg"
 #define MPIDR_CPUID_BITMASK	0x3
 
-/* I/O address of register used to coordinate secondary core startup */
-static u32	secondary_boot_addr;
-
 /*
  * Enable the Cortex A9 Snoop Control Unit
  *
@@ -81,20 +78,40 @@ static int __init scu_a9_enable(void)
 	return 0;
 }
 
-static int nsp_write_lut(void)
+static u32 secondary_boot_addr_for(unsigned int cpu)
+{
+	u32 secondary_boot_addr = 0;
+	struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
+
+        if (!cpu_node) {
+		pr_err("Failed to find device tree node for CPU%u\n", cpu);
+		return 0;
+	}
+
+	if (of_property_read_u32(cpu_node,
+				 OF_SECONDARY_BOOT,
+				 &secondary_boot_addr))
+		pr_err("required secondary boot register not specified for CPU%u\n",
+			cpu);
+
+	of_node_put(cpu_node);
+
+	return secondary_boot_addr;
+}
+
+static int nsp_write_lut(unsigned int cpu)
 {
 	void __iomem *sku_rom_lut;
 	phys_addr_t secondary_startup_phy;
+	const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
 
-	if (!secondary_boot_addr) {
-		pr_warn("required secondary boot register not specified\n");
+	if (!secondary_boot_addr)
 		return -EINVAL;
-	}
 
 	sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
-						sizeof(secondary_boot_addr));
+				      sizeof(phys_addr_t));
 	if (!sku_rom_lut) {
-		pr_warn("unable to ioremap SKU-ROM LUT register\n");
+		pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu);
 		return -ENOMEM;
 	}
 
@@ -113,70 +130,12 @@ static int nsp_write_lut(void)
 
 static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
 {
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	struct device_node *cpus_node = NULL;
-	struct device_node *cpu_node = NULL;
-	int ret;
-
-	/*
-	 * This function is only called via smp_ops->smp_prepare_cpu().
-	 * That only happens if a "/cpus" device tree node exists
-	 * and has an "enable-method" property that selects the SMP
-	 * operations defined herein.
-	 */
-	cpus_node = of_find_node_by_path("/cpus");
-	if (!cpus_node)
-		return;
-
-	for_each_child_of_node(cpus_node, cpu_node) {
-		u32 cpuid;
-
-		if (of_node_cmp(cpu_node->type, "cpu"))
-			continue;
-
-		if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
-			pr_debug("%s: missing reg property\n",
-				     cpu_node->full_name);
-			ret = -ENOENT;
-			goto out;
-		}
-
-		/*
-		 * "secondary-boot-reg" property should be defined only
-		 * for secondary cpu
-		 */
-		if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
-			/*
-			 * Our secondary enable method requires a
-			 * "secondary-boot-reg" property to specify a register
-			 * address used to request the ROM code boot a secondary
-			 * core. If we have any trouble getting this we fall
-			 * back to uniprocessor mode.
-			 */
-			if (of_property_read_u32(cpu_node,
-						OF_SECONDARY_BOOT,
-						&secondary_boot_addr)) {
-				pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
-					cpu_node->name);
-				ret = -ENOENT;
-				goto out;
-			}
-		}
-	}
-
-	/*
-	 * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
-	 * returned, the SoC reported a uniprocessor configuration.
-	 * We bail on any other error.
-	 */
-	ret = scu_a9_enable();
-out:
-	of_node_put(cpu_node);
-	of_node_put(cpus_node);
+	const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
 
-	if (ret) {
+	/* Enable the SCU on Cortex A9 based SoCs */
+	if (scu_a9_enable()) {
 		/* Update the CPU present map to reflect uniprocessor mode */
-		pr_warn("disabling SMP\n");
+		pr_warn("failed to enable A9 SCU - disabling SMP\n");
 		init_cpu_present(&only_cpu_0);
 	}
 }
@@ -207,6 +166,7 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	u32 cpu_id;
 	u32 boot_val;
 	bool timeout = false;
+	const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
 
 	cpu_id = cpu_logical_map(cpu);
 	if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
@@ -214,13 +174,11 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -EINVAL;
 	}
 
-	if (!secondary_boot_addr) {
-		pr_err("required secondary boot register not specified\n");
+	if (!secondary_boot_addr)
 		return -EINVAL;
-	}
 
-	boot_reg = ioremap_nocache(
-			(phys_addr_t)secondary_boot_addr, sizeof(u32));
+	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+				   sizeof(phys_addr_t));
 	if (!boot_reg) {
 		pr_err("unable to map boot register for cpu %u\n", cpu_id);
 		return -ENOMEM;
@@ -263,7 +221,7 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * After wake up, secondary core branches to the startup
 	 * address programmed at SKU ROM LUT location.
 	 */
-	ret = nsp_write_lut();
+	ret = nsp_write_lut(cpu);
 	if (ret) {
 		pr_err("unable to write startup addr to SKU ROM LUT\n");
 		goto out;
@@ -276,12 +234,12 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return ret;
 }
 
-static const struct smp_operations bcm_smp_ops __initconst = {
+static const struct smp_operations kona_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= kona_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
-			&bcm_smp_ops);
+			&kona_smp_ops);
 
 static const struct smp_operations nsp_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,