Commit becfad97 authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by David S. Miller

mv643xx_eth: minor register definition cleanup

Move the definitions for the SDMA and port serial configuration
register values to where all the other register definitions live,
and expand the shifts to 32 bit constants.
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 26ef1f17
...@@ -88,7 +88,24 @@ static char mv643xx_eth_driver_version[] = "1.4"; ...@@ -88,7 +88,24 @@ static char mv643xx_eth_driver_version[] = "1.4";
#define MAC_ADDR_LOW 0x0014 #define MAC_ADDR_LOW 0x0014
#define MAC_ADDR_HIGH 0x0018 #define MAC_ADDR_HIGH 0x0018
#define SDMA_CONFIG 0x001c #define SDMA_CONFIG 0x001c
#define TX_BURST_SIZE_16_64BIT 0x01000000
#define TX_BURST_SIZE_4_64BIT 0x00800000
#define BLM_TX_NO_SWAP 0x00000020
#define BLM_RX_NO_SWAP 0x00000010
#define RX_BURST_SIZE_16_64BIT 0x00000008
#define RX_BURST_SIZE_4_64BIT 0x00000004
#define PORT_SERIAL_CONTROL 0x003c #define PORT_SERIAL_CONTROL 0x003c
#define SET_MII_SPEED_TO_100 0x01000000
#define SET_GMII_SPEED_TO_1000 0x00800000
#define SET_FULL_DUPLEX_MODE 0x00200000
#define MAX_RX_PACKET_9700BYTE 0x000a0000
#define DISABLE_AUTO_NEG_SPEED_GMII 0x00002000
#define DO_NOT_FORCE_LINK_FAIL 0x00000400
#define SERIAL_PORT_CONTROL_RESERVED 0x00000200
#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL 0x00000008
#define DISABLE_AUTO_NEG_FOR_DUPLEX 0x00000004
#define FORCE_LINK_PASS 0x00000002
#define SERIAL_PORT_ENABLE 0x00000001
#define PORT_STATUS 0x0044 #define PORT_STATUS 0x0044
#define TX_FIFO_EMPTY 0x00000400 #define TX_FIFO_EMPTY 0x00000400
#define TX_IN_PROGRESS 0x00000080 #define TX_IN_PROGRESS 0x00000080
...@@ -135,15 +152,8 @@ static char mv643xx_eth_driver_version[] = "1.4"; ...@@ -135,15 +152,8 @@ static char mv643xx_eth_driver_version[] = "1.4";
/* /*
* SDMA configuration register. * SDMA configuration register default value.
*/ */
#define RX_BURST_SIZE_4_64BIT (2 << 1)
#define RX_BURST_SIZE_16_64BIT (4 << 1)
#define BLM_RX_NO_SWAP (1 << 4)
#define BLM_TX_NO_SWAP (1 << 5)
#define TX_BURST_SIZE_4_64BIT (2 << 22)
#define TX_BURST_SIZE_16_64BIT (4 << 22)
#if defined(__BIG_ENDIAN) #if defined(__BIG_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \ #define PORT_SDMA_CONFIG_DEFAULT_VALUE \
(RX_BURST_SIZE_4_64BIT | \ (RX_BURST_SIZE_4_64BIT | \
...@@ -160,22 +170,10 @@ static char mv643xx_eth_driver_version[] = "1.4"; ...@@ -160,22 +170,10 @@ static char mv643xx_eth_driver_version[] = "1.4";
/* /*
* Port serial control register. * Misc definitions.
*/ */
#define SET_MII_SPEED_TO_100 (1 << 24) #define DEFAULT_RX_QUEUE_SIZE 128
#define SET_GMII_SPEED_TO_1000 (1 << 23) #define DEFAULT_TX_QUEUE_SIZE 256
#define SET_FULL_DUPLEX_MODE (1 << 21)
#define MAX_RX_PACKET_9700BYTE (5 << 17)
#define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13)
#define DO_NOT_FORCE_LINK_FAIL (1 << 10)
#define SERIAL_PORT_CONTROL_RESERVED (1 << 9)
#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
#define DISABLE_AUTO_NEG_FOR_DUPLEX (1 << 2)
#define FORCE_LINK_PASS (1 << 1)
#define SERIAL_PORT_ENABLE (1 << 0)
#define DEFAULT_RX_QUEUE_SIZE 128
#define DEFAULT_TX_QUEUE_SIZE 256
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment