Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Unit test for overlays with GPIO hogs

 - Improve dma-ranges parsing to handle dma-ranges with multiple entries

 - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9

 - Improve overlay error reporting

 - Device link support for power-domains and hwlocks bindings

 - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
   PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
   ITE Tech

 - Add deprecated Marvell vendor prefix 'mrvl'

 - A bunch of binding conversions to DT schema continues. Of note, the
   common serial and USB connector bindings are converted.

 - Add more Arm CPU compatibles

 - Drop Mark Rutland as DT maintainer :(

* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
  MAINTAINERS: drop an old reference to stm32 pwm timers doc
  MAINTAINERS: dt: update etnaviv file reference
  dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
  dt-bindings: uniphier-system-bus: fix warning in the example
  dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
  dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
  dt-bindings: power: Fix example for power-domain
  dt-bindings: arm: Add some constraints for PSCI nodes
  of: some unittest overlays not untracked
  of: gpio unittest kfree() wrong object
  dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
  dt-bindings: serial: sh-sci: Convert to json-schema
  dt-bindings: serial: Document serialN aliases
  dt-bindings: thermal: tsens: Set 'additionalProperties: false'
  dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
  dt-bindings: vendor-prefixes: Add Beacon vendor prefix
  dt-bindings: vendor-prefixes: Add Topwise
  of: of_private.h: Replace zero-length array with flexible-array member
  docs: dt: fix a broken reference to input.yaml
  docs: dt: fix references to ap806-system-controller.txt
  ...

Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml

@@ -21,6 +21,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     clkmgr@ffd04000 {

Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml

@@ -43,6 +43,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     ao-secure@140 {

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -123,11 +123,18 @@ properties:
       - arm,cortex-a12
       - arm,cortex-a15
       - arm,cortex-a17
+      - arm,cortex-a32
+      - arm,cortex-a34
+      - arm,cortex-a35
       - arm,cortex-a53
       - arm,cortex-a55
       - arm,cortex-a57
+      - arm,cortex-a65
       - arm,cortex-a72
       - arm,cortex-a73
+      - arm,cortex-a75
+      - arm,cortex-a76
+      - arm,cortex-a77
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -136,6 +143,8 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,neoverse-e1
+      - arm,neoverse-n1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -155,6 +164,8 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo260
+      - qcom,kryo280
       - qcom,kryo385
       - qcom,kryo485
       - qcom,scorpion

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -164,7 +164,7 @@ Required properties:
 - compatible: should be:
               "fsl,imx8qxp-sc-key"
               followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt
+- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
 
 Example (imx8qxp):
 -------------

Documentation/devicetree/bindings/arm/l2c2x0.yaml

@@ -29,27 +29,30 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - arm,pl310-cache
-      - arm,l220-cache
-      - arm,l210-cache
-        # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
-      - bcm,bcm11351-a2-pl310-cache
-        # For Broadcom bcm11351 chipset where an
-        # offset needs to be added to the address before passing down to the L2
-        # cache controller
-      - brcm,bcm11351-a2-pl310-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one, with system cache mode (meaning
-        # maintenance operations on L1 are broadcasted to the L2 and L2
-        # performs the same operation).
-      - marvell,aurora-system-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one with outer cache mode.
-      - marvell,aurora-outer-cache
-        # Marvell Tauros3 cache controller, compatible
-        # with arm,pl310-cache controller.
-      - marvell,tauros3-cache
+    oneOf:
+      - enum:
+          - arm,pl310-cache
+          - arm,l220-cache
+          - arm,l210-cache
+            # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+          - bcm,bcm11351-a2-pl310-cache
+            # For Broadcom bcm11351 chipset where an
+            # offset needs to be added to the address before passing down to the L2
+            # cache controller
+          - brcm,bcm11351-a2-pl310-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one, with system cache mode (meaning
+            # maintenance operations on L1 are broadcasted to the L2 and L2
+            # performs the same operation).
+          - marvell,aurora-system-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one with outer cache mode.
+          - marvell,aurora-outer-cache
+      - items:
+           # Marvell Tauros3 cache controller, compatible
+           # with arm,pl310-cache controller.
+          - const: marvell,tauros3-cache
+          - const: arm,pl310-cache
 
   cache-level:
     const: 2

Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml

@@ -28,8 +28,11 @@ properties:
         items:
           - enum:
               - mrvl,mmp2-brownstone
+              - olpc,xo-1.75
           - const: mrvl,mmp2
       - description: MMP3 based boards
         items:
-          - const: mrvl,mmp3
+          - enum:
+              - dell,wyse-ariel
+          - const: marvell,mmp3
 ...

Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml

@@ -43,6 +43,8 @@ required:
   - reg-names
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/arm/pmu.yaml

@@ -20,27 +20,36 @@ properties:
     items:
       - enum:
           - apm,potenza-pmu
-          - arm,armv8-pmuv3
-          - arm,cortex-a73-pmu
-          - arm,cortex-a72-pmu
-          - arm,cortex-a57-pmu
-          - arm,cortex-a53-pmu
-          - arm,cortex-a35-pmu
-          - arm,cortex-a17-pmu
-          - arm,cortex-a15-pmu
-          - arm,cortex-a12-pmu
-          - arm,cortex-a9-pmu
-          - arm,cortex-a8-pmu
-          - arm,cortex-a7-pmu
-          - arm,cortex-a5-pmu
-          - arm,arm11mpcore-pmu
-          - arm,arm1176-pmu
+          - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
+          - arm,arm1176-pmu
+          - arm,arm11mpcore-pmu
+          - arm,cortex-a5-pmu
+          - arm,cortex-a7-pmu
+          - arm,cortex-a8-pmu
+          - arm,cortex-a9-pmu
+          - arm,cortex-a12-pmu
+          - arm,cortex-a15-pmu
+          - arm,cortex-a17-pmu
+          - arm,cortex-a32-pmu
+          - arm,cortex-a34-pmu
+          - arm,cortex-a35-pmu
+          - arm,cortex-a53-pmu
+          - arm,cortex-a55-pmu
+          - arm,cortex-a57-pmu
+          - arm,cortex-a65-pmu
+          - arm,cortex-a72-pmu
+          - arm,cortex-a73-pmu
+          - arm,cortex-a75-pmu
+          - arm,cortex-a76-pmu
+          - arm,cortex-a77-pmu
+          - arm,neoverse-e1-pmu
+          - arm,neoverse-n1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
-          - qcom,krait-pmu
 
   interrupts:
     # Don't know how many CPUs, so no constraints to specify

Documentation/devicetree/bindings/arm/psci.yaml

@@ -32,6 +32,9 @@ description: |+
     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
 
 properties:
+  $nodename:
+    const: psci
+
   compatible:
     oneOf:
       - description:
@@ -141,6 +144,8 @@ allOf:
         - cpu_off
         - cpu_on
 
+additionalProperties: false
+
 examples:
   - |+
 

Documentation/devicetree/bindings/arm/renesas,prr.yaml

@@ -27,6 +27,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     prr: chipid@ff000044 {

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

@@ -30,6 +30,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     chipid@10000000 {

Documentation/devicetree/bindings/arm/samsung/pmu.yaml

@@ -89,6 +89,8 @@ required:
   - clock-names
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>

Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml

@@ -23,6 +23,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     firmware@203f000 {

Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt

-UniPhier outer cache controller
-
-UniPhier SoCs are integrated with a full-custom outer cache controller system.
-All of them have a level 2 cache controller, and some have a level 3 cache
-controller as well.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-cache"
-- reg: offsets and lengths of the register sets for the device.  It should
-  contain 3 regions: control register, revision register, operation register,
-  in this order.
-- cache-unified: specifies the cache is a unified cache.
-- cache-size: specifies the size in bytes of the cache
-- cache-sets: specifies the number of associativity sets of the cache
-- cache-line-size: specifies the line size in bytes
-- cache-level: specifies the level in the cache hierarchy.  The value should
-  be 2 for L2 cache, 3 for L3 cache, etc.
-
-Optional properties:
-- next-level-cache: phandle to the next level cache if present.  The next level
-  cache should be also compatible with "socionext,uniphier-system-cache".
-
-The L2 cache must exist to use the L3 cache; the cache hierarchy must be
-indicated correctly with "next-level-cache" properties.
-
-Example 1 (system with L2):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x80000>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-Example 2 (system with L2 and L3):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x200000>;
-		cache-sets = <512>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-		next-level-cache = <&l3>;
-	};
-
-	l3: l3-cache@500c8000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
-		      <0x506c8000 0x400>;
-		cache-unified;
-		cache-size = <0x400000>;
-		cache-sets = <512>;
-		cache-line-size = <256>;
-		cache-level = <3>;
-	};

Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier outer cache controller
+
+description: |
+  UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache
+  controller system. All of them have a level 2 cache controller, and some
+  have a level 3 cache controller as well.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-cache
+
+  reg:
+    description: |
+      should contain 3 regions: control register, revision register,
+      operation register, in this order.
+    minItems: 3
+    maxItems: 3
+
+  interrupts:
+    description: |
+      Interrupts can be used to notify the completion of cache operations.
+      The number of interrupts should match to the number of CPU cores.
+      The specified interrupts correspond to CPU0, CPU1, ... in this order.
+      minItems: 1
+      maxItems: 4
+
+  cache-unified: true
+
+  cache-size: true
+
+  cache-sets: true
+
+  cache-line-size: true
+
+  cache-level:
+    minimum: 2
+    maximum: 3
+
+  next-level-cache: true
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-unified
+  - cache-size
+  - cache-sets
+  - cache-line-size
+  - cache-level
+
+examples:
+  - |
+    // System with L2.
+    cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x140000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+    };
+  - |
+    // System with L2 and L3.
+    //   L2 should specify the next level cache by 'next-level-cache'.
+    l2: cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+        interrupts = <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+        next-level-cache = <&l3>;
+    };
+
+    l3: cache-controller@500c8000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <256>;
+        cache-level = <3>;
+    };

Documentation/devicetree/bindings/arm/socionext/uniphier.txt

-Socionext UniPhier SoC family
------------------------------
-
-Required properties in the root node:
-  - compatible: should contain board and SoC compatible strings
-
-SoC and board compatible strings:
-  (sorted chronologically)
-
-  - LD4 SoC:  "socionext,uniphier-ld4"
-      - Reference Board: "socionext,uniphier-ld4-ref"
-
-  - Pro4 SoC: "socionext,uniphier-pro4"
-      - Reference Board: "socionext,uniphier-pro4-ref"
-      - Ace Board:       "socionext,uniphier-pro4-ace"
-      - Sanji Board:     "socionext,uniphier-pro4-sanji"
-
-  - sLD8 SoC: "socionext,uniphier-sld8"
-      - Reference Board: "socionext,uniphier-sld8-ref"
-
-  - PXs2 SoC: "socionext,uniphier-pxs2"
-      - Gentil Board:    "socionext,uniphier-pxs2-gentil"
-      - Vodka Board:     "socionext,uniphier-pxs2-vodka"
-
-  - LD6b SoC: "socionext,uniphier-ld6b"
-      - Reference Board: "socionext,uniphier-ld6b-ref"
-
-  - LD11 SoC: "socionext,uniphier-ld11"
-      - Reference Board: "socionext,uniphier-ld11-ref"
-      - Global Board:    "socionext,uniphier-ld11-global"
-
-  - LD20 SoC: "socionext,uniphier-ld20"
-      - Reference Board: "socionext,uniphier-ld20-ref"
-      - Global Board:    "socionext,uniphier-ld20-global"
-
-  - PXs3 SoC: "socionext,uniphier-pxs3"
-      - Reference Board: "socionext,uniphier-pxs3-ref"
-
-Example:
-
-/dts-v1/;
-
-/ {
-	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
-
-	...
-};

Documentation/devicetree/bindings/arm/socionext/uniphier.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier platform device tree bindings
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    const: /
+  compatible:
+    oneOf:
+      - description: LD4 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld4-ref
+          - const: socionext,uniphier-ld4
+      - description: Pro4 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pro4-ace
+            - socionext,uniphier-pro4-ref
+            - socionext,uniphier-pro4-sanji
+          - const: socionext,uniphier-pro4
+      - description: sLD8 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-sld8-ref
+          - const: socionext,uniphier-sld8
+      - description: PXs2 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pxs2-gentil
+            - socionext,uniphier-pxs2-vodka
+          - const: socionext,uniphier-pxs2
+      - description: LD6b SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld6b-ref
+          - const: socionext,uniphier-ld6b
+      - description: LD11 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld11-global
+            - socionext,uniphier-ld11-ref
+          - const: socionext,uniphier-ld11
+      - description: LD20 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-ld20-global
+            - socionext,uniphier-ld20-ref
+          - const: socionext,uniphier-ld20
+      - description: PXs3 SoC boards
+        items:
+          - enum:
+            - socionext,uniphier-pxs3-ref
+          - const: socionext,uniphier-pxs3

Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml

@@ -29,6 +29,8 @@ required:
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>

Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car Serial-ATA Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,sata-r8a7779      # R-Car H1
+      - items:
+          - enum:
+              - renesas,sata-r8a7790-es1  # R-Car H2 ES1
+              - renesas,sata-r8a7790      # R-Car H2 other than ES1
+              - renesas,sata-r8a7791      # R-Car M2-W
+              - renesas,sata-r8a7793      # R-Car M2-N
+          - const: renesas,rcar-gen2-sata # generic R-Car Gen2
+      - items:
+          - enum:
+              - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a7795      # R-Car H3
+              - renesas,sata-r8a77965     # R-Car M3-N
+          - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    sata@ee300000 {
+            compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
+            reg = <0xee300000 0x200000>;
+            interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 815>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 815>;
+    };

Documentation/devicetree/bindings/ata/sata_rcar.txt

-* Renesas R-Car SATA
-
-Required properties:
-- compatible		: should contain one or more of the following:
-			  - "renesas,sata-r8a774b1" for RZ/G2N
-			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
-			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
-			  - "renesas,sata-r8a7791" for R-Car M2-W
-			  - "renesas,sata-r8a7793" for R-Car M2-N
-			  - "renesas,sata-r8a7795" for R-Car H3
-			  - "renesas,sata-r8a77965" for R-Car M3-N
-			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2
-			     compatible device
-			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or
-			     RZ/G2 compatible device
-			  - "renesas,rcar-sata" is deprecated
-
-			  When compatible with the generic version nodes
-			  must list the SoC-specific version corresponding
-			  to the platform first followed by the generic
-			  version.
-
-- reg			: address and length of the SATA registers;
-- interrupts		: must consist of one interrupt specifier.
-- clocks		: must contain a reference to the functional clock.
-
-Example:
-
-sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
-	reg = <0 0xee300000 0 0x2000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
-};

Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier System Bus
+
+description: |
+  The UniPhier System Bus is an external bus that connects on-board devices to
+  the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+  some control signals. It supports up to 8 banks (chip selects).
+
+  Before any access to the bus, the bus controller must be configured; the bus
+  controller registers provide the control for the translation from the offset
+  within each bank to the CPU-viewed address. The needed setup includes the
+  base address, the size of each bank. Optionally, some timing parameters can
+  be optimized for faster bus access.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    description: |
+      The first cell is the bank number (chip select).
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Provide address translation from the System Bus to the parent bus.
+
+      Note:
+      The address region(s) that can be assigned for the System Bus is
+      implementation defined. Some SoCs can use 0x00000000-0x0fffffff and
+      0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff.
+      There might be additional limitations depending on SoCs and the boot mode.
+      The address translation is arbitrary as long as the banks are assigned in
+      the supported address space with the required alignment and they do not
+      overlap one another.
+
+      For example, it is possible to map:
+        bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+      It is also possible to map:
+        bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+      There is no reason to stick to a particular translation mapping, but the
+      "ranges" property should provide a "reasonable" default that is known to
+      work. The software should initialize the bus controller according to it.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    // In this example,
+    // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+    //   mapped to 0x43f00000 of the parent bus.
+    // - the UART device is connected at the offset 0x00200000 of CS5 and
+    //   mapped to 0x46200000 of the parent bus.
+
+    system-bus@58c00000 {
+        compatible = "socionext,uniphier-system-bus";
+        reg = <0x58c00000 0x400>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0x00000000 0x42000000 0x02000000>,
+                 <5 0x00000000 0x46000000 0x01000000>;
+
+        ethernet@1,01f00000 {
+            compatible = "smsc,lan9115";
+            reg = <1 0x01f00000 0x1000>;
+            interrupts = <0 48 4>;
+            phy-mode = "mii";
+        };
+
+        uart@5,00200000 {
+            compatible = "ns16550a";
+            reg = <5 0x00200000 0x20>;
+            interrupts = <0 49 4>;
+            clock-frequency = <12288000>;
+        };
+    };

Documentation/devicetree/bindings/bus/uniphier-system-bus.txt

-UniPhier System Bus
-
-The UniPhier System Bus is an external bus that connects on-board devices to
-the UniPhier SoC.  It is a simple (semi-)parallel bus with address, data, and
-some control signals.  It supports up to 8 banks (chip selects).
-
-Before any access to the bus, the bus controller must be configured; the bus
-controller registers provide the control for the translation from the offset
-within each bank to the CPU-viewed address.  The needed setup includes the base
-address, the size of each bank.  Optionally, some timing parameters can be
-optimized for faster bus access.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-bus".
-- reg: offset and length of the register set for the bus controller device.
-- #address-cells: should be 2.  The first cell is the bank number (chip select).
-  The second cell is the address offset within the bank.
-- #size-cells: should be 1.
-- ranges: should provide a proper address translation from the System Bus to
-  the parent bus.
-
-Note:
-The address region(s) that can be assigned for the System Bus is implementation
-defined.  Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff,
-while other SoCs can only use 0x40000000-0x4fffffff.  There might be additional
-limitations depending on SoCs and the boot mode.  The address translation is
-arbitrary as long as the banks are assigned in the supported address space with
-the required alignment and they do not overlap one another.
-For example, it is possible to map:
-  bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
-It is also possible to map:
-  bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
-There is no reason to stick to a particular translation mapping, but the
-"ranges" property should provide a "reasonable" default that is known to work.
-The software should initialize the bus controller according to it.
-
-Example:
-
-	system-bus {
-		compatible = "socionext,uniphier-system-bus";
-		reg = <0x58c00000 0x400>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <1 0x00000000 0x42000000 0x02000000
-			  5 0x00000000 0x46000000 0x01000000>;
-
-		ethernet@1,01f00000 {
-			compatible = "smsc,lan9115";
-			reg = <1 0x01f00000 0x1000>;
-			interrupts = <0 48 4>
-			phy-mode = "mii";
-		};
-
-		uart@5,00200000 {
-			compatible = "ns16550a";
-			reg = <5 0x00200000 0x20>;
-			interrupts = <0 49 4>
-			clock-frequency = <12288000>;
-		};
-	};
-
-In this example,
- - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
-   mapped to 0x43f00000 of the parent bus.
- - the UART device is connected at the offset 0x00200000 of CS5 and
-   mapped to 0x46200000 of the parent bus.

Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chrome OS EC(Embedded Controller) Type C port driver.
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Prashant Malani <pmalani@chromium.org>
+
+description:
+  Chrome OS devices have an Embedded Controller(EC) which has access to
+  Type C port state. This node is intended to allow the host to read and
+  control the Type C ports. The node for this device should be under a
+  cros-ec node like google,cros-ec-spi.
+
+properties:
+  compatible:
+    const: google,cros-ec-typec
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+  - compatible
+
+examples:
+  - |+
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+
+        typec {
+          compatible = "google,cros-ec-typec";
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+            try-power-role = "source";
+          };
+        };
+      };
+    };

Documentation/devicetree/bindings/clock/clock-bindings.txt

@@ -94,7 +94,7 @@ clock is connected to output 0 of the &ref.
     /* external oscillator */
     osc: oscillator {
         compatible = "fixed-clock";
-        #clock-cells = <1>;
+        #clock-cells = <0>;
         clock-frequency  = <32678>;
         clock-output-names = "osc";
     };

Documentation/devicetree/bindings/clock/fsl,plldig.yaml

@@ -21,6 +21,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   '#clock-cells':
     const: 0
 
@@ -41,6 +44,8 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Display PIXEL Clock node:
   - |

Documentation/devicetree/bindings/clock/imx8mn-clock.yaml

@@ -52,6 +52,8 @@ required:
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |

Documentation/devicetree/bindings/clock/imx8mp-clock.yaml

@@ -52,6 +52,8 @@ required:
   - clock-names
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |

Documentation/devicetree/bindings/clock/milbeaut-clock.yaml

@@ -35,6 +35,8 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock controller node:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -68,6 +68,8 @@ required:
   - nvmem-cell-names
   - '#thermal-sensor-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@900000 {

Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml

@@ -40,6 +40,8 @@ required:
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {

Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml

@@ -56,6 +56,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@300000 {

Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml

@@ -66,6 +66,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>

Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml

@@ -40,6 +40,8 @@ required:
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {

Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml

@@ -58,6 +58,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

@@ -56,6 +56,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,gcc.yaml

@@ -74,6 +74,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for MSM8960:
   - |

Documentation/devicetree/bindings/clock/qcom,mmcc.yaml

@@ -74,6 +74,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 if:
   properties:
     compatible:

Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml

@@ -50,6 +50,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8998.h>

Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml

@@ -35,6 +35,8 @@ required:
   - compatible
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for SDM845: The below node should be defined inside
   # &apps_rsc node.

Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml

@@ -58,6 +58,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>

Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml

@@ -52,6 +52,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>

Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml

@@ -48,6 +48,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml

@@ -67,6 +67,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml

@@ -52,6 +52,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>

Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml

@@ -48,6 +48,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>

Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System clock
+        enum:
+          - socionext,uniphier-ld4-clock
+          - socionext,uniphier-pro4-clock
+          - socionext,uniphier-sld8-clock
+          - socionext,uniphier-pro5-clock
+          - socionext,uniphier-pxs2-clock
+          - socionext,uniphier-ld6b-clock
+          - socionext,uniphier-ld11-clock
+          - socionext,uniphier-ld20-clock
+          - socionext,uniphier-pxs3-clock
+      - description: Media I/O (MIO) clock, SD clock
+        enum:
+          - socionext,uniphier-ld4-mio-clock
+          - socionext,uniphier-pro4-mio-clock
+          - socionext,uniphier-sld8-mio-clock
+          - socionext,uniphier-pro5-sd-clock
+          - socionext,uniphier-pxs2-sd-clock
+          - socionext,uniphier-ld11-mio-clock
+          - socionext,uniphier-ld20-sd-clock
+          - socionext,uniphier-pxs3-sd-clock
+      - description: Peripheral clock
+        enum:
+          - socionext,uniphier-ld4-peri-clock
+          - socionext,uniphier-pro4-peri-clock
+          - socionext,uniphier-sld8-peri-clock
+          - socionext,uniphier-pro5-peri-clock
+          - socionext,uniphier-pxs2-peri-clock
+          - socionext,uniphier-ld11-peri-clock
+          - socionext,uniphier-ld20-peri-clock
+          - socionext,uniphier-pxs3-peri-clock
+
+  "#clock-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    mioctrl@59810000 {
+        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
+        reg = <0x59810000 0x800>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    perictrl@59820000 {
+        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };

Documentation/devicetree/bindings/clock/uniphier-clock.txt

-UniPhier clock controller
-
-
-System clock
-------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x4000>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 8: ST DMAC
-12: GIO (Giga bit stream I/O)
-14: USB3 ch0 host
-15: USB3 ch1 host
-16: USB3 ch0 PHY0
-17: USB3 ch0 PHY1
-20: USB3 ch1 PHY0
-21: USB3 ch1 PHY1
-
-
-Media I/O (MIO) clock, SD clock
--------------------------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
-    "socionext,uniphier-pxs3-sd-clock"  - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	mioctrl@59810000 {
-		compatible = "socionext,uniphier-mioctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59810000 0x800>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-mio-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: SD ch0 host
- 1: eMMC host
- 2: SD ch1 host
- 7: MIO DMAC
- 8: USB2 ch0 host
- 9: USB2 ch1 host
-10: USB2 ch2 host
-12: USB2 ch0 PHY
-13: USB2 ch1 PHY
-14: USB2 ch2 PHY
-
-
-Peripheral clock
-----------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	perictrl@59820000 {
-		compatible = "socionext,uniphier-perictrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59820000 0x200>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-peri-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: UART ch0
- 1: UART ch1
- 2: UART ch2
- 3: UART ch3
- 4: I2C ch0
- 5: I2C ch1
- 6: I2C ch2
- 7: I2C ch3
- 8: I2C ch4
- 9: I2C ch5
-10: I2C ch6

Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt

@@ -19,7 +19,7 @@ Required nodes:
     0: High Speed (HS),
     3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
 
-[1]: bindings/connector/usb-connector.txt
+[1]: bindings/connector/usb-connector.yaml
 
 Example
 -------

Documentation/devicetree/bindings/connector/usb-connector.txt

-USB Connector
-=============
-
-A USB connector node represents a physical USB connector. It should be
-a child of a USB interface controller.
-
-Required properties:
-- compatible: describes type of the connector, must be one of:
-    "usb-a-connector",
-    "usb-b-connector",
-    "usb-c-connector".
-
-Optional properties:
-- label: symbolic name for the connector,
-- type: size of the connector, should be specified in case of USB-A, USB-B
-  non-fullsize connectors: "mini", "micro".
-- self-powered: Set this property if the usb device that has its own power
-  source.
-
-Optional properties for usb-b-connector:
-- id-gpios: an input gpio for USB ID pin.
-- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
-  VBUS 5V.
-  see gpio/gpio.txt.
-- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
-  mode or dual role mode is supported.
-  Particularly, if use an output GPIO to control a VBUS regulator, should
-  model it as a regulator.
-  see regulator/fixed-regulator.yaml
-- pinctrl-names : a pinctrl state named "default" is optional
-- pinctrl-0 : pin control group
-  see pinctrl/pinctrl-bindings.txt
-
-Optional properties for usb-c-connector:
-- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
-  connector has power support.
-- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK
-  or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
-- data-role: should be one of "host", "device", "dual"(DRD) if typec
-  connector supports USB data.
-
-Required properties for usb-c-connector with power delivery support:
-- source-pdos: An array of u32 with each entry providing supported power
-  source data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-  Source_Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power source and power dual role.
-  User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-  defined in dt-bindings/usb/pd.h.
-- sink-pdos: An array of u32 with each entry providing supported power
-  sink data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-  Sink Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power sink and power dual role.
-  User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-  in dt-bindings/usb/pd.h.
-- op-sink-microwatt: Sink required operating power in microwatt, if source
-  can't offer the power, Capability Mismatch is set. Required for power
-  sink and power dual role.
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
-  specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multiple data buses every bus
-  has assigned OF graph port number as follows:
-    0: High Speed (HS), present in all connectors,
-    1: Super Speed (SS), present in SS capable connectors,
-    2: Sideband use (SBU), present in USB-C.
-
-Examples
---------
-
-1. Micro-USB connector with HS lines routed via controller (MUIC):
-
-muic-max77843@66 {
-	...
-	usb_con: connector {
-		compatible = "usb-b-connector";
-		label = "micro-USB";
-		type = "micro";
-	};
-};
-
-2. USB-C connector attached to CC controller (s2mm005), HS lines routed
-to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
-DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-
-ccic: s2mm005@33 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usb_con_hs: endpoint {
-					remote-endpoint = <&max77865_usbc_hs>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				usb_con_ss: endpoint {
-					remote-endpoint = <&usbdrd_phy_ss>;
-				};
-			};
-			port@2 {
-				reg = <2>;
-				usb_con_sbu: endpoint {
-					remote-endpoint = <&dp_aux>;
-				};
-			};
-		};
-	};
-};
-
-3. USB-C connector attached to a typec port controller(ptn5110), which has
-power delivery support and enables drp.
-
-typec: ptn5110@50 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		power-role = "dual";
-		try-power-role = "sink";
-		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-			     PDO_VAR(5000, 12000, 2000)>;
-		op-sink-microwatt = <10000000>;
-	};
-};

Documentation/devicetree/bindings/connector/usb-connector.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Connector
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  A USB connector node represents a physical USB connector. It should be a child
+  of a USB interface controller.
+
+properties:
+  compatible:
+    enum:
+      - usb-a-connector
+      - usb-b-connector
+      - usb-c-connector
+
+  label:
+    description: Symbolic name for the connector.
+
+  type:
+    description: Size of the connector, should be specified in case of
+      non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
+      connectors.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - mini
+      - micro
+
+  self-powered:
+    description: Set this property if the USB device has its own power source.
+    type: boolean
+
+  # The following are optional properties for "usb-b-connector".
+  id-gpios:
+    description: An input gpio for USB ID pin.
+    maxItems: 1
+
+  vbus-gpios:
+    description: An input gpio for USB VBus pin, used to detect presence of
+      VBUS 5V.
+    maxItems: 1
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS if needed when host
+      mode or dual role mode is supported.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+
+  # The following are optional properties for "usb-c-connector".
+  power-role:
+    description: Determines the power role that the Type C connector will
+      support. "dual" refers to Dual Role Port (DRP).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - source
+      - sink
+      - dual
+
+  try-power-role:
+    description: Preferred power role.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+     - source
+     - sink
+     - dual
+
+  data-role:
+    description: Data role if Type C connector supports USB data. "dual" refers
+      Dual Role Device (DRD).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - host
+      - device
+      - dual
+
+  # The following are optional properties for "usb-c-connector" with power
+  # delivery support.
+  source-pdos:
+    description: An array of u32 with each entry providing supported power
+      source data object(PDO), the detailed bit definitions of PDO can be found
+      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+      Source_Capabilities Message, the order of each entry(PDO) should follow
+      the PD spec chapter 6.4.1. Required for power source and power dual role.
+      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+      defined in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-pdos:
+    description: An array of u32 with each entry providing supported power sink
+      data object(PDO), the detailed bit definitions of PDO can be found in
+      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+      Sink Capabilities Message, the order of each entry(PDO) should follow the
+      PD spec chapter 6.4.1. Required for power sink and power dual role. User
+      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+      in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  op-sink-microwatt:
+    description: Sink required operating power in microwatt, if source can't
+      offer the power, Capability Mismatch is set. Required for power sink and
+      power dual role.
+
+  ports:
+    description: OF graph bindings (specified in bindings/graph.txt) that model
+      any data bus to the connector unless the bus is between parent node and
+      the connector. Since a single connector can have multiple data buses every
+      bus has an assigned OF graph port number as described below.
+    type: object
+    properties:
+      port@0:
+        type: object
+        description: High Speed (HS), present in all connectors.
+
+      port@1:
+        type: object
+        description: Super Speed (SS), present in SS capable connectors.
+
+      port@2:
+        type: object
+        description: Sideband Use (SBU), present in USB-C. This describes the
+          alternate mode connection of which SBU is a part.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+
+examples:
+  # Micro-USB connector with HS lines routed via controller (MUIC).
+  - |+
+    muic-max77843 {
+      usb_con1: connector {
+        compatible = "usb-b-connector";
+        label = "micro-USB";
+        type = "micro";
+      };
+    };
+
+  # USB-C connector attached to CC controller (s2mm005), HS lines routed
+  # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+  # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+  - |+
+    ccic: s2mm005 {
+      usb_con2: connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            usb_con_hs: endpoint {
+              remote-endpoint = <&max77865_usbc_hs>;
+            };
+          };
+          port@1 {
+            reg = <1>;
+            usb_con_ss: endpoint {
+              remote-endpoint = <&usbdrd_phy_ss>;
+            };
+          };
+          port@2 {
+            reg = <2>;
+            usb_con_sbu: endpoint {
+              remote-endpoint = <&dp_aux>;
+            };
+          };
+        };
+      };
+    };
+
+  # USB-C connector attached to a typec port controller(ptn5110), which has
+  # power delivery support and enables drp.
+  - |+
+    #include <dt-bindings/usb/pd.h>
+    typec: ptn5110 {
+      usb_con3: connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+        power-role = "dual";
+        try-power-role = "sink";
+        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                     PDO_VAR(5000, 12000, 2000)>;
+        op-sink-microwatt = <10000000>;
+      };
+    };

Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml

@@ -71,9 +71,9 @@ properties:
     maxItems: 2
 
   reg-names:
-   items:
-     - const: vpu
-     - const: hhi
+    items:
+      - const: vpu
+      - const: hhi
 
   interrupts:
     maxItems: 1
@@ -107,6 +107,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     vpu: vpu@d0100000 {

Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt

-Vivante GPU core devices
-========================
-
-Required properties:
-- compatible: Should be "vivante,gc"
-  A more specific compatible is not needed, as the cores contain chip
-  identification registers at fixed locations, which provide all the
-  necessary information to the driver.
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain the cores interrupt line
-- clocks: should contain one clock for entry in clock-names
-  see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
-   - "bus":    AXI/master interface clock
-   - "reg":    AHB/slave interface clock
-               (only required if GPU can gate slave interface independently)
-   - "core":   GPU core clock
-   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
-
-Optional properties:
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-
-example:
-
-gpu_3d: gpu@130000 {
-	compatible = "vivante,gc";
-	reg = <0x00130000 0x4000>;
-	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
-	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
-	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
-	clock-names = "bus", "core", "shader";
-	power-domains = <&gpc 1>;
-};

Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml

@@ -43,6 +43,8 @@ required:
   - interrupts
   - '#dma-cells'
 
+additionalProperties: false
+
 examples:
   - |
     dma@3000000 {

Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+  This works as an external DMA engine for SD/eMMC controllers etc.
+  found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-mio-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      A list of interrupt specifiers associated with the DMA channels.
+      The number of interrupt lines is SoC-dependent.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#dma-cells':
+    description: The single cell represents the channel index.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+    // typo. The first two channels share a single interrupt line.
+
+    dmac: dma-controller@5a000000 {
+        compatible = "socionext,uniphier-mio-dmac";
+        reg = <0x5a000000 0x1000>;
+        interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+                     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+        clocks = <&mio_clk 7>;
+        resets = <&mio_rst 7>;
+        #dma-cells = <1>;
+    };

Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt

-UniPhier Media IO DMA controller
-
-This works as an external DMA engine for SD/eMMC controllers etc.
-found in UniPhier LD4, Pro4, sLD8 SoCs.
-
-Required properties:
-- compatible: should be "socionext,uniphier-mio-dmac".
-- reg: offset and length of the register set for the device.
-- interrupts: a list of interrupt specifiers associated with the DMA channels.
-- clocks: a single clock specifier.
-- #dma-cells: should be <1>. The single cell represents the channel index.
-
-Example:
-	dmac: dma-controller@5a000000 {
-		compatible = "socionext,uniphier-mio-dmac";
-		reg = <0x5a000000 0x1000>;
-		interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-			     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
-		clocks = <&mio_clk 7>;
-		#dma-cells = <1>;
-	};
-
-Note:
-In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
-The first two channels share a single interrupt line.

Documentation/devicetree/bindings/dsp/fsl,dsp.yaml

@@ -68,6 +68,8 @@ required:
   - mbox-names
   - memory-region
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/firmware/imx/rsrc.h>

Documentation/devicetree/bindings/eeprom/at24.yaml

@@ -172,6 +172,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/example-schema.yaml

@@ -7,9 +7,9 @@
 
 # $id is a unique identifier based on the filename. There may or may not be a
 # file present at the URL.
-$id: "http://devicetree.org/schemas/example-schema.yaml#"
+$id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: An example schema annotated with jsonschema details
 

Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

@@ -34,9 +34,12 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
     };
+...

Documentation/devicetree/bindings/gnss/gnss.txt

@@ -8,7 +8,7 @@ bus (e.g. UART, I2C or SPI).
 
 Please refer to the following documents for generic properties:
 
-	Documentation/devicetree/bindings/serial/slave-device.txt
+	Documentation/devicetree/bindings/serial/serial.yaml
 	Documentation/devicetree/bindings/spi/spi-bus.txt
 
 Required properties:

Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml

@@ -47,6 +47,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 dependencies:
   interrupt-controller: [ interrupts ]
 

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

@@ -14,7 +14,7 @@ Required properties:
 
     "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
     SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+    Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
     for specific details about the offset property.
 
 - reg: Address and length of the register set for the device. Only one

Documentation/devicetree/bindings/gpio/gpio-uniphier.txt

-UniPhier GPIO controller
-
-Required properties:
-- compatible: Should be "socionext,uniphier-gpio".
-- reg: Specifies offset and length of the register set for the device.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 2.  The first cell is the pin number and the second
-  cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be 2.  The first cell defines the interrupt number.
-  The second cell bits[3:0] is used to specify trigger type as follows:
-    1 = low-to-high edge triggered
-    2 = high-to-low edge triggered
-    4 = active high level-sensitive
-    8 = active low level-sensitive
-  Valid combinations are 1, 2, 3, 4, 8.
-- ngpios: Specifies the number of GPIO lines.
-- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt)
-- socionext,interrupt-ranges: Specifies an interrupt number mapping between
-  this GPIO controller and its interrupt parent, in the form of arbitrary
-  number of <child-interrupt-base parent-interrupt-base length> triplets.
-
-Optional properties:
-- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt)
-
-Example:
-	gpio: gpio@55000000 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000000 0x200>;
-		interrupt-parent = <&aidet>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pinctrl 0 0 0>;
-		gpio-ranges-group-names = "gpio_range";
-		ngpios = <248>;
-		socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
-	};
-
-Consumer Example:
-
-	sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
-	};
-
-Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document.
-Unfortunately, only the one's place is octal in the port numbering.  (That is,
-PORT 8, 9, 18, 19, 28, 29, ... are missing.)  UNIPHIER_GPIO_PORT() is a helper
-macro to calculate 29 * 8 + 4.

Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier GPIO controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: socionext,uniphier-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      The first cell defines the interrupt number.
+      The second cell bits[3:0] is used to specify trigger type as follows:
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 512
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  socionext,interrupt-ranges:
+    description: |
+      Specifies an interrupt number mapping between this GPIO controller and
+      its interrupt parent, in the form of arbitrary number of
+      <child-interrupt-base parent-interrupt-base length> triplets.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - ngpios
+  - gpio-ranges
+  - socionext,interrupt-ranges
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/uniphier-gpio.h>
+
+    gpio: gpio@55000000 {
+        compatible = "socionext,uniphier-gpio";
+        reg = <0x55000000 0x200>;
+        interrupt-parent = <&aidet>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 0>;
+        gpio-ranges-group-names = "gpio_range";
+        ngpios = <248>;
+        socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
+    };
+
+    // Consumer:
+    // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
+    // document. Unfortunately, only the one's place is octal in the port
+    // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
+    // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
+    sdhci0_pwrseq {
+        compatible = "mmc-pwrseq-emmc";
+        reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
+    };

Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml

@@ -49,6 +49,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -43,6 +43,9 @@ properties:
 
   operating-points-v2: true
 
+  resets:
+    maxItems: 2
+
 required:
   - compatible
   - reg
@@ -50,6 +53,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -57,9 +62,6 @@ allOf:
           contains:
             const: amlogic,meson-g12a-mali
     then:
-      properties:
-        resets:
-          minItems: 2
       required:
         - resets
 

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -75,6 +75,9 @@ properties:
 
   mali-supply: true
 
+  power-domains:
+    maxItems: 1
+
   resets:
     minItems: 1
     maxItems: 2
@@ -91,6 +94,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml

@@ -115,6 +115,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/gpu/samsung-rotator.yaml

@@ -36,6 +36,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     rotator@12810000 {

Documentation/devicetree/bindings/gpu/vivante,gc.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vivante GPU Bindings
+
+description: Vivante GPU core devices
+
+maintainers:
+  -  Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    const: vivante,gc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AXI/master interface clock
+      - description: GPU core clock
+      - description: Shader clock (only required if GPU has feature PIPE_3D)
+      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      enum: [ bus, core, shader, reg ]
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpu@130000 {
+      compatible = "vivante,gc";
+      reg = <0x00130000 0x4000>;
+      interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+               <&clks IMX6QDL_CLK_GPU3D_CORE>,
+               <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+      clock-names = "bus", "core", "shader";
+      power-domains = <&gpc 1>;
+    };
+
+...

Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

@@ -47,6 +47,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml

@@ -87,6 +87,8 @@ required:
   - reg
 
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml

@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -76,6 +76,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

-* Rockchip RK3xxx I2C controller
-
-This driver interfaces with the native I2C controller present in Rockchip
-RK3xxx SoCs.
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible: should be one of the following:
-   - "rockchip,rv1108-i2c": for rv1108
-   - "rockchip,rk3066-i2c": for rk3066
-   - "rockchip,rk3188-i2c": for rk3188
-   - "rockchip,rk3228-i2c": for rk3228
-   - "rockchip,rk3288-i2c": for rk3288
-   - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328
-   - "rockchip,rk3399-i2c": for rk3399
- - interrupts : interrupt number
- - clocks: See ../clock/clock-bindings.txt
-   - For older hardware (rk3066, rk3188, rk3228, rk3288):
-     - There is one clock that's used both to derive the functional clock
-       for the device and as the bus clock.
-   - For newer hardware (rk3399): specified by name
-     - "i2c": This is used to derive the functional clock.
-     - "pclk": This is the bus clock.
-
-Required on RK3066, RK3188 :
-
- - rockchip,grf : the phandle of the syscon node for the general register
-		  file (GRF)
- - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
-   is also required.
-
-Optional properties :
-
- - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
- - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
-	(t(r) in I2C specification). If not specified this is assumed to be
-	the maximum the specification allows(1000 ns for Standard-mode,
-	300 ns for Fast-mode) which might cause slightly slower communication.
- - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
-	(t(f) in the I2C specification). If not specified this is assumed to
-	be the maximum the specification allows (300 ns) which might cause
-	slightly slower communication.
- - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
-	(t(f) in the I2C specification). If not specified we'll use the SCL
-	value since they are the same in nearly all cases.
-
-Example:
-
-aliases {
-	i2c0 = &i2c0;
-}
-
-i2c0: i2c@2002d000 {
-	compatible = "rockchip,rk3188-i2c";
-	reg = <0x2002d000 0x1000>;
-	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rockchip,grf = <&grf>;
-
-	clock-names = "i2c";
-	clocks = <&cru PCLK_I2C0>;
-
-	i2c-scl-rising-time-ns = <800>;
-	i2c-scl-falling-time-ns = <100>;
-};

Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3xxx I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in Rockchip
+  RK3xxx SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rv1108-i2c
+      - const: rockchip,rk3066-i2c
+      - const: rockchip,rk3188-i2c
+      - const: rockchip,rk3228-i2c
+      - const: rockchip,rk3288-i2c
+      - const: rockchip,rk3399-i2c
+      - items:
+          - enum:
+            - rockchip,rk3036-i2c
+            - rockchip,rk3368-i2c
+          - const: rockchip,rk3288-i2c
+      - items:
+          - enum:
+            - rockchip,px30-i2c
+            - rockchip,rk3308-i2c
+            - rockchip,rk3328-i2c
+          - const: rockchip,rk3399-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description:
+          For older hardware (rk3066, rk3188, rk3228, rk3288)
+          there is one clock that is used both to derive the functional clock
+          for the device and as the bus clock.
+          For newer hardware (rk3399) this clock is used to derive
+          the functional clock
+      - description:
+          For newer hardware (rk3399) this is the bus clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2c
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Required on RK3066, RK3188 the phandle of the syscon node for
+      the general register file (GRF)
+      On those SoCs an alias with the correct I2C bus ID
+      (bit offset in the GRF) is also required.
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  i2c-scl-rising-time-ns:
+    default: 1000
+    description:
+      Number of nanoseconds the SCL signal takes to rise
+      (t(r) in I2C specification). If not specified this is assumed to be
+      the maximum the specification allows(1000 ns for Standard-mode,
+      300 ns for Fast-mode) which might cause slightly slower communication.
+
+  i2c-scl-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SCL signal takes to fall
+      (t(f) in the I2C specification). If not specified this is assumed to
+      be the maximum the specification allows (300 ns) which might cause
+      slightly slower communication.
+
+  i2c-sda-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SDA signal takes to fall
+      (t(f) in the I2C specification). If not specified we will use the SCL
+      value since they are the same in nearly all cases.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3066-i2c
+          - rockchip,rk3188-i2c
+
+then:
+  required:
+    - rockchip,grf
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0: i2c@2002d000 {
+      compatible = "rockchip,rk3188-i2c";
+      reg = <0x2002d000 0x1000>;
+      interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_I2C0>;
+      clock-names = "i2c";
+      rockchip,grf = <&grf>;
+      i2c-scl-falling-time-ns = <100>;
+      i2c-scl-rising-time-ns = <800>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };

Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt

-UniPhier I2C controller (FIFO-builtin)
-
-Required properties:
-- compatible: should be "socionext,uniphier-fi2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58780000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};

Documentation/devicetree/bindings/i2c/i2c-uniphier.txt

-UniPhier I2C controller (FIFO-less)
-
-Required properties:
-- compatible: should be "socionext,uniphier-i2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58400000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};

Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-builtin)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-fi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    i2c0: i2c@58780000 {
+        compatible = "socionext,uniphier-fi2c";
+        reg = <0x58780000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 4>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };

Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-less)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    i2c0: i2c@58400000 {
+        compatible = "socionext,uniphier-i2c";
+        reg = <0x58400000 0x40>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 1>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

@@ -17,9 +17,13 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,adxl345
-      - adi,adxl375
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml

@@ -36,6 +36,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -106,7 +106,6 @@ examples:
         spi-cpha;
         clocks = <&ad7192_mclk>;
         clock-names = "mclk";
-        #interrupt-cells = <2>;
         interrupts = <25 0x2>;
         interrupt-parent = <&gpio>;
         dvdd-supply = <&dvdd>;

Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml

@@ -67,6 +67,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml

@@ -53,6 +53,8 @@ required:
   - dout-gpios
   - avdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -32,6 +32,8 @@ required:
   - vref-supply
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

@@ -52,6 +52,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -69,6 +69,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 patternProperties:
   "^filter@[0-9]+$":
     type: object

Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml

@@ -38,6 +38,8 @@ required:
   - compatible
   - vcc-supply
 
+additionalProperties: false
+
 examples:
   - |
     serial {

Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml

@@ -24,6 +24,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml

@@ -34,6 +34,8 @@ required:
   - reg
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/light/adux1020.yaml

@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/bh1750.yaml

@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/isl29018.yaml

@@ -38,6 +38,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/noa1305.yaml

@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/stk33xx.yaml

@@ -30,6 +30,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/tsl2583.yaml

@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/light/tsl2772.yaml

@@ -62,6 +62,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/light/veml6030.yaml

@@ -45,6 +45,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml

@@ -33,6 +33,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>