Commit bf482326 authored by Evan Quan's avatar Evan Quan Committed by Alex Deucher

drm/amd/pm: fix possible power mode mismatch between driver and PMFW

PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: default avatarEvan Quan <evan.quan@amd.com>
Reviewed-by: default avatarKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
parent c1a322a7
......@@ -733,6 +733,24 @@ static int smu_late_init(void *handle)
return ret;
}
/*
* Explicitly notify PMFW the power mode the system in. Since
* the PMFW may boot the ASIC with a different mode.
* For those supporting ACDC switch via gpio, PMFW will
* handle the switch automatically. Driver involvement
* is unnecessary.
*/
if (!smu->dc_controlled_by_gpio) {
ret = smu_set_power_source(smu,
adev->pm.ac_power ? SMU_POWER_SOURCE_AC :
SMU_POWER_SOURCE_DC);
if (ret) {
dev_err(adev->dev, "Failed to switch to %s mode!\n",
adev->pm.ac_power ? "AC" : "DC");
return ret;
}
}
if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 1)) ||
(adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 3)))
return 0;
......
......@@ -3413,26 +3413,8 @@ static int navi10_post_smu_init(struct smu_context *smu)
return 0;
ret = navi10_run_umc_cdr_workaround(smu);
if (ret) {
if (ret)
dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
return ret;
}
if (!smu->dc_controlled_by_gpio) {
/*
* For Navi1X, manually switch it to AC mode as PMFW
* may boot it with DC mode.
*/
ret = smu_v11_0_set_power_source(smu,
adev->pm.ac_power ?
SMU_POWER_SOURCE_AC :
SMU_POWER_SOURCE_DC);
if (ret) {
dev_err(adev->dev, "Failed to switch to %s mode!\n",
adev->pm.ac_power ? "AC" : "DC");
return ret;
}
}
return ret;
}
......
......@@ -1770,6 +1770,7 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
.enable_mgpu_fan_boost = smu_v13_0_7_enable_mgpu_fan_boost,
.get_power_limit = smu_v13_0_7_get_power_limit,
.set_power_limit = smu_v13_0_set_power_limit,
.set_power_source = smu_v13_0_set_power_source,
.get_power_profile_mode = smu_v13_0_7_get_power_profile_mode,
.set_power_profile_mode = smu_v13_0_7_set_power_profile_mode,
.set_tool_table_location = smu_v13_0_set_tool_table_location,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment