Merge branch 'nexthop-refactor-and-fix-nexthop-selection-for-multipath-routes'

Benjamin Poirier says:

====================
nexthop: Refactor and fix nexthop selection for multipath routes

In order to select a nexthop for multipath routes, fib_select_multipath()
is used with legacy nexthops and nexthop_select_path_hthr() is used with
nexthop objects. Those two functions perform a validity test on the
neighbor related to each nexthop but their logic is structured differently.
This causes a divergence in behavior and nexthop_select_path_hthr() may
return a nexthop that failed the neighbor validity test even if there was
one that passed.

Refactor nexthop_select_path_hthr() to make it more similar to
fib_select_multipath() and fix the problem mentioned above.

v1: https://lore.kernel.org/netdev/20230529201914.69828-1-bpoirier@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230719-nh_select-v2-0-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

net/ipv4/nexthop.c

@@ -1152,41 +1152,64 @@ static bool ipv4_good_nh(const struct fib_nh *nh)
 	return !!(state & NUD_VALID);
 }
 
-static struct nexthop *nexthop_select_path_hthr(struct nh_group *nhg, int hash)
+static bool nexthop_is_good_nh(const struct nexthop *nh)
+{
+	struct nh_info *nhi = rcu_dereference(nh->nh_info);
+
+	switch (nhi->family) {
+	case AF_INET:
+		return ipv4_good_nh(&nhi->fib_nh);
+	case AF_INET6:
+		return ipv6_good_nh(&nhi->fib6_nh);
+	}
+
+	return false;
+}
+
+static struct nexthop *nexthop_select_path_fdb(struct nh_group *nhg, int hash)
 {
-	struct nexthop *rc = NULL;
 	int i;
 
-	for (i = 0; i < nhg->num_nh; ++i) {
+	for (i = 0; i < nhg->num_nh; i++) {
 		struct nh_grp_entry *nhge = &nhg->nh_entries[i];
-		struct nh_info *nhi;
 
 		if (hash > atomic_read(&nhge->hthr.upper_bound))
 			continue;
 
-		nhi = rcu_dereference(nhge->nh->nh_info);
-		if (nhi->fdb_nh)
-			return nhge->nh;
+		return nhge->nh;
+	}
+
+	WARN_ON_ONCE(1);
+	return NULL;
+}
+
+static struct nexthop *nexthop_select_path_hthr(struct nh_group *nhg, int hash)
+{
+	struct nexthop *rc = NULL;
+	int i;
+
+	if (nhg->fdb_nh)
+		return nexthop_select_path_fdb(nhg, hash);
+
+	for (i = 0; i < nhg->num_nh; ++i) {
+		struct nh_grp_entry *nhge = &nhg->nh_entries[i];
 
 		/* nexthops always check if it is good and does
 		 * not rely on a sysctl for this behavior
 		 */
-		switch (nhi->family) {
-		case AF_INET:
-			if (ipv4_good_nh(&nhi->fib_nh))
-				return nhge->nh;
-			break;
-		case AF_INET6:
-			if (ipv6_good_nh(&nhi->fib6_nh))
-				return nhge->nh;
-			break;
-		}
+		if (!nexthop_is_good_nh(nhge->nh))
+			continue;
 
 		if (!rc)
 			rc = nhge->nh;
+
+		if (hash > atomic_read(&nhge->hthr.upper_bound))
+			continue;
+
+		return nhge->nh;
 	}
 
-	return rc;
+	return rc ? : nhg->nh_entries[0].nh;
 }
 
 static struct nexthop *nexthop_select_path_res(struct nh_group *nhg, int hash)

tools/testing/selftests/net/fib_nexthops.sh

@@ -29,6 +29,7 @@ IPV4_TESTS="
 	ipv4_large_res_grp
 	ipv4_compat_mode
 	ipv4_fdb_grp_fcnal
+	ipv4_mpath_select
 	ipv4_torture
 	ipv4_res_torture
 "
@@ -42,6 +43,7 @@ IPV6_TESTS="
 	ipv6_large_res_grp
 	ipv6_compat_mode
 	ipv6_fdb_grp_fcnal
+	ipv6_mpath_select
 	ipv6_torture
 	ipv6_res_torture
 "
@@ -370,6 +372,27 @@ check_large_res_grp()
 	log_test $? 0 "Dump large (x$buckets) nexthop buckets"
 }
 
+get_route_dev()
+{
+	local pfx="$1"
+	local out
+
+	if out=$($IP -j route get "$pfx" | jq -re ".[0].dev"); then
+		echo "$out"
+	fi
+}
+
+check_route_dev()
+{
+	local pfx="$1"
+	local expected="$2"
+	local out
+
+	out=$(get_route_dev "$pfx")
+
+	check_output "$out" "$expected"
+}
+
 start_ip_monitor()
 {
 	local mtype=$1
@@ -575,6 +598,112 @@ ipv4_fdb_grp_fcnal()
 	$IP link del dev vx10
 }
 
+ipv4_mpath_select()
+{
+	local rc dev match h addr
+
+	echo
+	echo "IPv4 multipath selection"
+	echo "------------------------"
+	if [ ! -x "$(command -v jq)" ]; then
+		echo "SKIP: Could not run test; need jq tool"
+		return $ksft_skip
+	fi
+
+	# Use status of existing neighbor entry when determining nexthop for
+	# multipath routes.
+	local -A gws
+	gws=([veth1]=172.16.1.2 [veth3]=172.16.2.2)
+	local -A other_dev
+	other_dev=([veth1]=veth3 [veth3]=veth1)
+
+	run_cmd "$IP nexthop add id 1 via ${gws["veth1"]} dev veth1"
+	run_cmd "$IP nexthop add id 2 via ${gws["veth3"]} dev veth3"
+	run_cmd "$IP nexthop add id 1001 group 1/2"
+	run_cmd "$IP ro add 172.16.101.0/24 nhid 1001"
+	rc=0
+	for dev in veth1 veth3; do
+		match=0
+		for h in {1..254}; do
+			addr="172.16.101.$h"
+			if [ "$(get_route_dev "$addr")" = "$dev" ]; then
+				match=1
+				break
+			fi
+		done
+		if (( match == 0 )); then
+			echo "SKIP: Did not find a route using device $dev"
+			return $ksft_skip
+		fi
+		run_cmd "$IP neigh add ${gws[$dev]} dev $dev nud failed"
+		if ! check_route_dev "$addr" "${other_dev[$dev]}"; then
+			rc=1
+			break
+		fi
+		run_cmd "$IP neigh del ${gws[$dev]} dev $dev"
+	done
+	log_test $rc 0 "Use valid neighbor during multipath selection"
+
+	run_cmd "$IP neigh add 172.16.1.2 dev veth1 nud incomplete"
+	run_cmd "$IP neigh add 172.16.2.2 dev veth3 nud incomplete"
+	run_cmd "$IP route get 172.16.101.1"
+	# if we did not crash, success
+	log_test $rc 0 "Multipath selection with no valid neighbor"
+}
+
+ipv6_mpath_select()
+{
+	local rc dev match h addr
+
+	echo
+	echo "IPv6 multipath selection"
+	echo "------------------------"
+	if [ ! -x "$(command -v jq)" ]; then
+		echo "SKIP: Could not run test; need jq tool"
+		return $ksft_skip
+	fi
+
+	# Use status of existing neighbor entry when determining nexthop for
+	# multipath routes.
+	local -A gws
+	gws=([veth1]=2001:db8:91::2 [veth3]=2001:db8:92::2)
+	local -A other_dev
+	other_dev=([veth1]=veth3 [veth3]=veth1)
+
+	run_cmd "$IP nexthop add id 1 via ${gws["veth1"]} dev veth1"
+	run_cmd "$IP nexthop add id 2 via ${gws["veth3"]} dev veth3"
+	run_cmd "$IP nexthop add id 1001 group 1/2"
+	run_cmd "$IP ro add 2001:db8:101::/64 nhid 1001"
+	rc=0
+	for dev in veth1 veth3; do
+		match=0
+		for h in {1..65535}; do
+			addr=$(printf "2001:db8:101::%x" $h)
+			if [ "$(get_route_dev "$addr")" = "$dev" ]; then
+				match=1
+				break
+			fi
+		done
+		if (( match == 0 )); then
+			echo "SKIP: Did not find a route using device $dev"
+			return $ksft_skip
+		fi
+		run_cmd "$IP neigh add ${gws[$dev]} dev $dev nud failed"
+		if ! check_route_dev "$addr" "${other_dev[$dev]}"; then
+			rc=1
+			break
+		fi
+		run_cmd "$IP neigh del ${gws[$dev]} dev $dev"
+	done
+	log_test $rc 0 "Use valid neighbor during multipath selection"
+
+	run_cmd "$IP neigh add 2001:db8:91::2 dev veth1 nud incomplete"
+	run_cmd "$IP neigh add 2001:db8:92::2 dev veth3 nud incomplete"
+	run_cmd "$IP route get 2001:db8:101::1"
+	# if we did not crash, success
+	log_test $rc 0 "Multipath selection with no valid neighbor"
+}
+
 ################################################################################
 # basic operations (add, delete, replace) on nexthops and nexthop groups
 #