riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled

Now that noncoherent dma support for the RZ/Five SoC has been added, enable
the IP blocks which were disabled on the RZ/Five SMARC.  This adds
support for the below peripherals:
  * Ethernet
  * DMAC
  * SDHI
  * USB
  * RSPI
  * SSI
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929000704.53217-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi

@@ -7,25 +7,8 @@
 
 #include <arm64/renesas/rzg2ul-smarc-som.dtsi>
 
-/ {
-	aliases {
-		/delete-property/ ethernet0;
-		/delete-property/ ethernet1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel";
-	};
-};
-
-&dmac {
-	status = "disabled";
-};
-
 #if (!SW_ET0_EN_N)
 &eth0 {
-	status = "disabled";
-
 	phy0: ethernet-phy@7 {
 		/delete-property/ interrupt-parent;
 		/delete-property/ interrupts;
@@ -34,14 +17,8 @@ phy0: ethernet-phy@7 {
 #endif
 
 &eth1 {
-	status = "disabled";
-
 	phy1: ethernet-phy@7 {
 		/delete-property/ interrupt-parent;
 		/delete-property/ interrupts;
 	};
 };
-
-&sdhi0 {
-	status = "disabled";
-};

arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi

@@ -6,59 +6,3 @@
  */
 
 #include <arm64/renesas/rzg2ul-smarc.dtsi>
-
-&ehci0 {
-	status = "disabled";
-};
-
-&ehci1 {
-	status = "disabled";
-};
-
-&hsusb {
-	status = "disabled";
-};
-
-&ohci0 {
-	status = "disabled";
-};
-
-&ohci1 {
-	status = "disabled";
-};
-
-&phyrst {
-	status = "disabled";
-};
-
-&sdhi1 {
-	status = "disabled";
-};
-
-&snd_rzg2l {
-	status = "disabled";
-};
-
-&spi1 {
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "disabled";
-};
-
-&usb0_vbus_otg {
-	status = "disabled";
-};
-
-&usb2_phy0 {
-	status = "disabled";
-};
-
-&usb2_phy1 {
-	status = "disabled";
-};
-
-&vccq_sdhi1 {
-	status = "disabled";
-};