net/mlx5: E-Switch, Add match on vport metadata for rule in fast path

If FW's capabilities and configurations meet the requirement of vport
metadata matching, this feature will be used. As the information
about vport number and vhca_id related to packet is already stored to
its metadata register, which is used as an indicator for perticular
vport, now we can change to match on this metadata for all the
offloading rules in fast path.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c

@@ -88,6 +88,53 @@ u16 mlx5_eswitch_get_prio_range(struct mlx5_eswitch *esw)
 	return 1;
 }
 
+static void
+mlx5_eswitch_set_rule_source_port(struct mlx5_eswitch *esw,
+				  struct mlx5_flow_spec *spec,
+				  struct mlx5_esw_flow_attr *attr)
+{
+	void *misc2;
+	void *misc;
+
+	/* Use metadata matching because vport is not represented by single
+	 * VHCA in dual-port RoCE mode, and matching on source vport may fail.
+	 */
+	if (mlx5_eswitch_vport_match_metadata_enabled(esw)) {
+		misc2 = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters_2);
+		MLX5_SET(fte_match_set_misc2, misc2, metadata_reg_c_0,
+			 mlx5_eswitch_get_vport_metadata_for_match(attr->in_mdev->priv.eswitch,
+								   attr->in_rep->vport));
+
+		misc2 = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters_2);
+		MLX5_SET_TO_ONES(fte_match_set_misc2, misc2, metadata_reg_c_0);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_2;
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
+		if (memchr_inv(misc, 0, MLX5_ST_SZ_BYTES(fte_match_set_misc)))
+			spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS;
+	} else {
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
+		MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
+
+		if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+			MLX5_SET(fte_match_set_misc, misc,
+				 source_eswitch_owner_vhca_id,
+				 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
+
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
+		MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
+		if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+			MLX5_SET_TO_ONES(fte_match_set_misc, misc,
+					 source_eswitch_owner_vhca_id);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS;
+	}
+
+	if (MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source) &&
+	    attr->in_rep->vport == MLX5_VPORT_UPLINK)
+		spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK;
+}
+
 struct mlx5_flow_handle *
 mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 				struct mlx5_flow_spec *spec,
@@ -99,7 +146,6 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 	struct mlx5_flow_handle *rule;
 	struct mlx5_flow_table *fdb;
 	int j, i = 0;
-	void *misc;
 
 	if (esw->mode != SRIOV_OFFLOADS)
 		return ERR_PTR(-EOPNOTSUPP);
@@ -159,21 +205,8 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 		i++;
 	}
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-	MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
-
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET(fte_match_set_misc, misc,
-			 source_eswitch_owner_vhca_id,
-			 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
+	mlx5_eswitch_set_rule_source_port(esw, spec, attr);
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET_TO_ONES(fte_match_set_misc, misc,
-				 source_eswitch_owner_vhca_id);
-
-	spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS;
 	if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_DECAP) {
 		if (attr->tunnel_match_level != MLX5_MATCH_NONE)
 			spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS;
@@ -219,7 +252,6 @@ mlx5_eswitch_add_fwd_rule(struct mlx5_eswitch *esw,
 	struct mlx5_flow_table *fast_fdb;
 	struct mlx5_flow_table *fwd_fdb;
 	struct mlx5_flow_handle *rule;
-	void *misc;
 	int i;
 
 	fast_fdb = esw_get_prio_table(esw, attr->chain, attr->prio, 0);
@@ -251,25 +283,10 @@ mlx5_eswitch_add_fwd_rule(struct mlx5_eswitch *esw,
 	dest[i].ft = fwd_fdb,
 	i++;
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-	MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
-
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET(fte_match_set_misc, misc,
-			 source_eswitch_owner_vhca_id,
-			 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
-
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET_TO_ONES(fte_match_set_misc, misc,
-				 source_eswitch_owner_vhca_id);
+	mlx5_eswitch_set_rule_source_port(esw, spec, attr);
 
-	if (attr->match_level == MLX5_MATCH_NONE)
-		spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS;
-	else
-		spec->match_criteria_enable = MLX5_MATCH_OUTER_HEADERS |
-					      MLX5_MATCH_MISC_PARAMETERS;
+	if (attr->match_level != MLX5_MATCH_NONE)
+		spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS;
 
 	rule = mlx5_add_flow_rules(fast_fdb, spec, &flow_act, dest, i);