Commit c078c62a authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Vinod Koul

mmc: sh_mobile_sdhi: remove sh_mobile_sdhi_info v2

84f11d5b
(mmc: sh_mobile_sdhi: remove sh_mobile_sdhi_info)
replaced sh_mobile_sdhi_info to tmio_mmc_data, but it was missing
to replace board-ape6evm / board-mackerel.
Kernel build will be failed without this patch.

	>> arch/arm/mach-shmobile/board-ape6evm.c:176:21: error: \
		variable 'sdhi0_pdata' has initializer but incomplete type
	static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
	                    ^
	>> arch/arm/mach-shmobile/board-ape6evm.c:177:2: error: \
		unknown field 'tmio_flags' specified in initializer
	.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
	^
	...
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 84f11d5b
......@@ -173,9 +173,9 @@ static const struct resource mmcif0_resources[] __initconst = {
};
/* SDHI0 */
static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
static const struct tmio_mmc_data sdhi0_pdata __initconst = {
.flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
};
static const struct resource sdhi0_resources[] __initconst = {
......@@ -184,9 +184,9 @@ static const struct resource sdhi0_resources[] __initconst = {
};
/* SDHI1 */
static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
static const struct tmio_mmc_data sdhi1_pdata __initconst = {
.flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
};
......
......@@ -972,11 +972,11 @@ static struct platform_device nand_flash_device = {
};
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
static struct tmio_mmc_data sdhi0_info = {
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
.flags = TMIO_MMC_USE_GPIO_CD,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.cd_gpio = 172,
};
......@@ -1011,11 +1011,11 @@ static struct platform_device sdhi0_device = {
/* SDHI1 */
/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
static struct tmio_mmc_data sdhi1_info = {
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
.flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
.cd_gpio = 41,
};
......@@ -1054,11 +1054,11 @@ static struct platform_device sdhi1_device = {
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
* connected to GPIO SCIFB_SCK of SH7372 (GPIO 162).
*/
static struct sh_mobile_sdhi_info sdhi2_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
static struct tmio_mmc_data sdhi2_info = {
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI2_TX,
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI2_RX,
.flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
.cd_gpio = 162,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment